# @push.rocks/smartproxy

A powerful proxy package that effectively handles high traffic, with features such as SSL/TLS support, port proxying, WebSocket handling, and dynamic routing with authentication options.

## Architecture & Flow Diagrams

### Component Architecture
The diagram below illustrates the main components of SmartProxy and how they interact:

```mermaid
flowchart TB
    Client([Client])
    
    subgraph "SmartProxy Components"
        direction TB
        HTTP80[HTTP Port 80\nSslRedirect]
        HTTPS443[HTTPS Port 443\nNetworkProxy]
        PortProxy[TCP Port Proxy\nwith SNI routing]
        IPTables[IPTablesProxy]
        Router[ProxyRouter]
        ACME[Port80Handler\nACME/Let's Encrypt]
        Certs[(SSL Certificates)]
    end
    
    subgraph "Backend Services"
        Service1[Service 1]
        Service2[Service 2]
        Service3[Service 3]
    end
    
    Client -->|HTTP Request| HTTP80
    HTTP80 -->|Redirect| Client
    Client -->|HTTPS Request| HTTPS443
    Client -->|TLS/TCP| PortProxy
    
    HTTPS443 -->|Route Request| Router
    Router -->|Proxy Request| Service1
    Router -->|Proxy Request| Service2
    
    PortProxy -->|Direct TCP| Service2
    PortProxy -->|Direct TCP| Service3
    
    IPTables -.->|Low-level forwarding| PortProxy
    
    HTTP80 -.->|Challenge Response| ACME
    ACME -.->|Generate/Manage| Certs
    Certs -.->|Provide TLS Certs| HTTPS443
    
    classDef component fill:#f9f,stroke:#333,stroke-width:2px;
    classDef backend fill:#bbf,stroke:#333,stroke-width:1px;
    classDef client fill:#dfd,stroke:#333,stroke-width:2px;
    
    class Client client;
    class HTTP80,HTTPS443,PortProxy,IPTables,Router,ACME component;
    class Service1,Service2,Service3 backend;
```

### HTTPS Reverse Proxy Flow
This diagram shows how HTTPS requests are handled and proxied to backend services:

```mermaid
sequenceDiagram
    participant Client
    participant NetworkProxy
    participant ProxyRouter
    participant Backend
    
    Client->>NetworkProxy: HTTPS Request
    
    Note over NetworkProxy: TLS Termination
    
    NetworkProxy->>ProxyRouter: Route Request
    ProxyRouter->>ProxyRouter: Match hostname to config
    
    alt Authentication Required
        NetworkProxy->>Client: Request Authentication
        Client->>NetworkProxy: Send Credentials
        NetworkProxy->>NetworkProxy: Validate Credentials
    end
    
    NetworkProxy->>Backend: Forward Request
    Backend->>NetworkProxy: Response
    
    Note over NetworkProxy: Add Default Headers
    
    NetworkProxy->>Client: Forward Response
    
    alt WebSocket Request
        Client->>NetworkProxy: Upgrade to WebSocket
        NetworkProxy->>Backend: Upgrade to WebSocket
        loop WebSocket Active
            Client->>NetworkProxy: WebSocket Message
            NetworkProxy->>Backend: Forward Message
            Backend->>NetworkProxy: WebSocket Message
            NetworkProxy->>Client: Forward Message
            NetworkProxy-->>NetworkProxy: Heartbeat Check
        end
    end
```

### Port Proxy with SNI-based Routing
This diagram illustrates how TCP connections with SNI (Server Name Indication) are processed and forwarded:

```mermaid
sequenceDiagram
    participant Client
    participant PortProxy
    participant Backend
    
    Client->>PortProxy: TLS Connection
    
    alt SNI Enabled
        PortProxy->>Client: Accept Connection
        Client->>PortProxy: TLS ClientHello with SNI
        PortProxy->>PortProxy: Extract SNI Hostname
        PortProxy->>PortProxy: Match Domain Config
        PortProxy->>PortProxy: Validate Client IP
        
        alt IP Allowed
            PortProxy->>Backend: Forward Connection
            Note over PortProxy,Backend: Bidirectional Data Flow
        else IP Rejected
            PortProxy->>Client: Close Connection
        end
    else Port-based Routing
        PortProxy->>PortProxy: Match Port Range
        PortProxy->>PortProxy: Find Domain Config
        PortProxy->>PortProxy: Validate Client IP
        
        alt IP Allowed
            PortProxy->>Backend: Forward Connection
            Note over PortProxy,Backend: Bidirectional Data Flow
        else IP Rejected
            PortProxy->>Client: Close Connection
        end
    end
    
    loop Connection Active
        PortProxy-->>PortProxy: Monitor Activity
        PortProxy-->>PortProxy: Check Max Lifetime
        alt Inactivity or Max Lifetime Exceeded
            PortProxy->>Client: Close Connection
            PortProxy->>Backend: Close Connection
        end
    end
```

### Let's Encrypt Certificate Acquisition
This diagram shows how certificates are automatically acquired through the ACME protocol:

```mermaid
sequenceDiagram
    participant Client
    participant Port80Handler
    participant ACME as Let's Encrypt ACME
    participant NetworkProxy
    
    Client->>Port80Handler: HTTP Request for domain
    
    alt Certificate Exists
        Port80Handler->>Client: Redirect to HTTPS
    else No Certificate
        Port80Handler->>Port80Handler: Mark domain as obtaining cert
        Port80Handler->>ACME: Create account & new order
        ACME->>Port80Handler: Challenge information
        
        Port80Handler->>Port80Handler: Store challenge token & key authorization
        
        ACME->>Port80Handler: HTTP-01 Challenge Request
        Port80Handler->>ACME: Challenge Response
        
        ACME->>ACME: Validate domain ownership
        ACME->>Port80Handler: Challenge validated
        
        Port80Handler->>Port80Handler: Generate CSR
        Port80Handler->>ACME: Submit CSR
        ACME->>Port80Handler: Issue Certificate
        
        Port80Handler->>Port80Handler: Store certificate & private key
        Port80Handler->>Port80Handler: Mark certificate as obtained
        
        Note over Port80Handler,NetworkProxy: Certificate available for use
        
        Client->>Port80Handler: Another HTTP Request
        Port80Handler->>Client: Redirect to HTTPS
        Client->>NetworkProxy: HTTPS Request
        Note over NetworkProxy: Uses new certificate
    end
```

## Features

- **HTTPS Reverse Proxy** - Route traffic to backend services based on hostname with TLS termination
- **WebSocket Support** - Full WebSocket proxying with heartbeat monitoring
- **TCP Port Forwarding** - Advanced port forwarding with SNI inspection and domain-based routing
- **Enhanced TLS Handling** - Robust TLS handshake processing with improved certificate error handling
- **HTTP to HTTPS Redirection** - Automatically redirect HTTP requests to HTTPS
- **Let's Encrypt Integration** - Automatic certificate management using ACME protocol
- **IP Filtering** - Control access with IP allow/block lists using glob patterns
- **IPTables Integration** - Direct manipulation of iptables for low-level port forwarding
- **Basic Authentication** - Support for basic auth on proxied routes
- **Connection Management** - Intelligent connection tracking and cleanup with configurable timeouts
- **Browser Compatibility** - Optimized for modern browsers with fixes for common TLS handshake issues

## Installation

```bash
npm install @push.rocks/smartproxy
```

## Usage

### Basic Reverse Proxy Setup

```typescript
import { NetworkProxy } from '@push.rocks/smartproxy';

// Create a reverse proxy listening on port 443
const proxy = new NetworkProxy({
  port: 443
});

// Define reverse proxy configurations
const proxyConfigs = [
  {
    hostName: 'example.com',
    destinationIp: '127.0.0.1',
    destinationPort: 3000,
    publicKey: 'your-cert-content',
    privateKey: 'your-key-content'
  },
  {
    hostName: 'api.example.com',
    destinationIp: '127.0.0.1',
    destinationPort: 4000,
    publicKey: 'your-cert-content',
    privateKey: 'your-key-content',
    // Optional basic auth
    authentication: {
      type: 'Basic',
      user: 'admin',
      pass: 'secret'
    }
  }
];

// Start the proxy and update configurations
(async () => {
  await proxy.start();
  await proxy.updateProxyConfigs(proxyConfigs);
  
  // Add default headers to all responses
  await proxy.addDefaultHeaders({
    'Strict-Transport-Security': 'max-age=31536000; includeSubDomains; preload'
  });
})();
```

### HTTP to HTTPS Redirection

```typescript
import { SslRedirect } from '@push.rocks/smartproxy';

// Create and start HTTP to HTTPS redirect service on port 80
const redirector = new SslRedirect(80);
redirector.start();
```

### TCP Port Forwarding with Domain-based Routing

```typescript
import { PortProxy } from '@push.rocks/smartproxy';

// Configure port proxy with domain-based routing
const portProxy = new PortProxy({
  fromPort: 443,
  toPort: 8443,
  targetIP: 'localhost', // Default target host
  sniEnabled: true,      // Enable SNI inspection
  
  // Enhanced reliability settings
  initialDataTimeout: 60000,        // 60 seconds for initial TLS handshake
  socketTimeout: 3600000,           // 1 hour socket timeout
  maxConnectionLifetime: 3600000,   // 1 hour connection lifetime
  inactivityTimeout: 3600000,       // 1 hour inactivity timeout
  maxPendingDataSize: 10 * 1024 * 1024, // 10MB buffer for large TLS handshakes
  
  // Browser compatibility enhancement
  enableTlsDebugLogging: false,     // Enable for troubleshooting TLS issues
  
  // Port and IP configuration
  globalPortRanges: [{ from: 443, to: 443 }],
  defaultAllowedIPs: ['*'], // Allow all IPs by default
  
  // Socket optimizations for better connection stability
  noDelay: true,                    // Disable Nagle's algorithm
  keepAlive: true,                  // Enable TCP keepalive
  enableKeepAliveProbes: true,      // Enhanced keepalive for stability
  
  // Domain-specific routing configuration
  domainConfigs: [
    {
      domains: ['example.com', '*.example.com'], // Glob patterns for matching domains
      allowedIPs: ['192.168.1.*'],               // Restrict access by IP
      blockedIPs: ['192.168.1.100'],             // Block specific IPs
      targetIPs: ['10.0.0.1', '10.0.0.2'],       // Round-robin between multiple targets
      portRanges: [{ from: 443, to: 443 }],
      connectionTimeout: 7200000                 // Domain-specific timeout (2 hours)
    }
  ],
  
  preserveSourceIP: true
});

portProxy.start();
```

### IPTables Port Forwarding

```typescript
import { IPTablesProxy } from '@push.rocks/smartproxy';

// Configure IPTables to forward from port 80 to 8080
const iptables = new IPTablesProxy({
  fromPort: 80,
  toPort: 8080,
  toHost: 'localhost',
  preserveSourceIP: true,
  deleteOnExit: true  // Automatically clean up rules on process exit
});

iptables.start();
```

### Automatic HTTPS Certificate Management

```typescript
import { Port80Handler } from '@push.rocks/smartproxy';

// Create an ACME handler for Let's Encrypt
const acmeHandler = new Port80Handler();

// Add domains to manage certificates for
acmeHandler.addDomain('example.com');
acmeHandler.addDomain('api.example.com');
```

## Configuration Options

### NetworkProxy Options

| Option         | Description                                       | Default |
|----------------|---------------------------------------------------|---------|
| `port`         | Port to listen on for HTTPS connections           | -       |

### PortProxy Settings

| Option                    | Description                                            | Default     |
|---------------------------|--------------------------------------------------------|-------------|
| `fromPort`                | Port to listen on                                      | -           |
| `toPort`                  | Destination port to forward to                         | -           |
| `targetIP`                | Default destination IP if not specified in domainConfig | 'localhost' |
| `sniEnabled`              | Enable SNI inspection for TLS connections              | false       |
| `defaultAllowedIPs`       | IP patterns allowed by default                         | -           |
| `defaultBlockedIPs`       | IP patterns blocked by default                         | -           |
| `preserveSourceIP`        | Preserve the original client IP                        | false       |
| `maxConnectionLifetime`   | Maximum time in ms to keep a connection open           | 3600000     |
| `initialDataTimeout`      | Timeout for initial data/handshake in ms               | 60000       |
| `socketTimeout`           | Socket inactivity timeout in ms                        | 3600000     |
| `inactivityTimeout`       | Connection inactivity check timeout in ms              | 3600000     |
| `inactivityCheckInterval` | How often to check for inactive connections in ms      | 60000       |
| `maxPendingDataSize`      | Maximum bytes to buffer during connection setup        | 10485760    |
| `globalPortRanges`        | Array of port ranges to listen on                      | -           |
| `forwardAllGlobalRanges`  | Forward all global range connections to targetIP       | false       |
| `gracefulShutdownTimeout` | Time in ms to wait during shutdown                     | 30000       |
| `noDelay`                 | Disable Nagle's algorithm                              | true        |
| `keepAlive`               | Enable TCP keepalive                                   | true        |
| `keepAliveInitialDelay`   | Initial delay before sending keepalive probes in ms    | 30000       |
| `enableKeepAliveProbes`   | Enable enhanced TCP keep-alive probes                  | false       |
| `enableTlsDebugLogging`   | Enable detailed TLS handshake debugging                | false       |
| `enableDetailedLogging`   | Enable detailed connection logging                     | false       |
| `enableRandomizedTimeouts`| Randomize timeouts slightly to prevent thundering herd | true        |

### IPTablesProxy Settings

| Option            | Description                                 | Default     |
|-------------------|---------------------------------------------|-------------|
| `fromPort`        | Source port to forward from                 | -           |
| `toPort`          | Destination port to forward to              | -           |
| `toHost`          | Destination host to forward to              | 'localhost' |
| `preserveSourceIP`| Preserve the original client IP             | false       |
| `deleteOnExit`    | Remove iptables rules when process exits    | false       |

## Advanced Features

### TLS Handshake Optimization

The enhanced `PortProxy` implementation includes significant improvements for TLS handshake handling:

- Robust SNI extraction with improved error handling
- Increased buffer size for complex TLS handshakes (10MB)
- Longer initial handshake timeout (60 seconds)
- Detection and tracking of TLS connection states
- Optional detailed TLS debug logging for troubleshooting
- Browser compatibility fixes for Chrome certificate errors

```typescript
// Example configuration to solve Chrome certificate errors
const portProxy = new PortProxy({
  // ... other settings
  initialDataTimeout: 60000,            // Give browser more time for handshake
  maxPendingDataSize: 10 * 1024 * 1024, // Larger buffer for complex handshakes
  enableTlsDebugLogging: true,          // Enable when troubleshooting
});
```

### Connection Management and Monitoring

The `PortProxy` class includes built-in connection tracking and monitoring:

- Automatic cleanup of idle connections with configurable timeouts
- Timeouts for connections that exceed maximum lifetime
- Detailed logging of connection states
- Termination statistics
- Randomized timeouts to prevent "thundering herd" problems
- Per-domain timeout configuration

### WebSocket Support

The `NetworkProxy` class provides WebSocket support with:

- WebSocket connection proxying
- Automatic heartbeat monitoring
- Connection cleanup for inactive WebSockets

### SNI-based Routing

The `PortProxy` class can inspect the SNI (Server Name Indication) field in TLS handshakes to route connections based on the requested domain:

- Multiple backend targets per domain
- Round-robin load balancing
- Domain-specific allowed IP ranges
- Protection against SNI renegotiation attacks

## Troubleshooting

### Browser Certificate Errors

If you experience certificate errors in browsers, especially in Chrome, try these solutions:

1. **Increase Initial Data Timeout**: Set `initialDataTimeout` to 60 seconds or higher
2. **Increase Buffer Size**: Set `maxPendingDataSize` to 10MB or higher
3. **Enable TLS Debug Logging**: Set `enableTlsDebugLogging: true` to troubleshoot handshake issues
4. **Enable Keep-Alive Probes**: Set `enableKeepAliveProbes: true` for better connection stability
5. **Check Certificate Chain**: Ensure your certificate chain is complete and in the correct order

```typescript
// Configuration to fix Chrome certificate errors
const portProxy = new PortProxy({
  // ... other settings
  initialDataTimeout: 60000,
  maxPendingDataSize: 10 * 1024 * 1024,
  enableTlsDebugLogging: true,
  enableKeepAliveProbes: true
});
```

### Connection Stability

For improved connection stability in high-traffic environments:

1. **Set Appropriate Timeouts**: Use longer timeouts for long-lived connections
2. **Use Domain-Specific Timeouts**: Configure per-domain timeouts for different types of services
3. **Enable TCP Keep-Alive**: Ensure `keepAlive` is set to `true`
4. **Monitor Connection Statistics**: Enable detailed logging to track termination reasons
5. **Fine-tune Inactivity Checks**: Adjust `inactivityCheckInterval` based on your traffic patterns

## License and Legal Information

This repository contains open-source code that is licensed under the MIT License. A copy of the MIT License can be found in the [license](license) file within this repository. 

**Please note:** The MIT License does not grant permission to use the trade names, trademarks, service marks, or product names of the project, except as required for reasonable and customary use in describing the origin of the work and reproducing the content of the NOTICE file.

### Trademarks

This project is owned and maintained by Task Venture Capital GmbH. The names and logos associated with Task Venture Capital GmbH and any related products or services are trademarks of Task Venture Capital GmbH and are not included within the scope of the MIT license granted herein. Use of these trademarks must comply with Task Venture Capital GmbH's Trademark Guidelines, and any usage must be approved in writing by Task Venture Capital GmbH.

### Company Information

Task Venture Capital GmbH  
Registered at District court Bremen HRB 35230 HB, Germany

For any legal inquiries or if you require further information, please contact us via email at hello@task.vc.

By using this repository, you acknowledge that you have read this section, agree to comply with its terms, and understand that the licensing of the code does not imply endorsement by Task Venture Capital GmbH of any derivative works.