2.4.0

changelog.md

@@ -1,5 +1,38 @@
 # Changelog
 
+## 2025-03-25 - 2.4.0 - feat(installer)
+Add auto-yes flag to installer and update installation documentation
+
+- Enhance install.sh to parse -y/--yes and -h/--help options, automating git installation when auto-yes is provided
+- Improve user prompts for dependency installation and provide clearer instructions
+- Update readme.md to document new installer options and enhanced file system and service changes details
+
+## 2025-03-25 - 2.3.0 - feat(installer/cli)
+Add OS detection and git auto-installation support to install.sh and improve service setup prompt in CLI
+
+- Implemented helper functions in install.sh to detect OS type and automatically install git if missing
+- Prompt user for git installation if not present before cloning the repository
+- Enhanced CLI service setup flow to offer starting the NUPST service immediately after installation
+
+## 2025-03-25 - 2.2.0 - feat(cli)
+Add 'config' command to display current configuration and update CLI help
+
+- Introduce new 'config' command to show SNMP settings, thresholds, and configuration file location
+- Update help text to include details for 'nupst config' command
+
+## 2025-03-25 - 2.1.0 - feat(cli)
+Add uninstall command to CLI and update shutdown delay for graceful VM shutdown
+
+- Implement uninstall command in ts/cli.ts that locates and executes uninstall.sh with user prompts
+- Update uninstall.sh to support environment variables for configuration and repository removal
+- Increase shutdown delay in ts/snmp/manager.ts from 1 minute to 5 minutes to allow VMs more time to shut down
+
+## 2025-03-25 - 2.0.1 - fix(cli/systemd)
+Fix status command to pass debug flag and improve systemd status logging output
+
+- ts/cli.ts: Now extracts debug options from process arguments and passes debug mode to getStatus.
+- ts/systemd.ts: Updated getStatus to accept a debugMode parameter, enabling detailed SNMP debug logging, explicitly reloading configuration, and printing connection details.
+
 ## 2025-03-25 - 2.0.0 - BREAKING CHANGE(snmp)
 refactor: update SNMP type definitions and interface names for consistency
 

install.sh

@@ -2,7 +2,45 @@
 
 # NUPST Installer Script
 # Downloads and installs NUPST globally on the system
-# Can be used directly with curl: curl -sSL https://code.foss.global/serve.zone/nupst/raw/branch/main/install.sh | sudo bash
+# Can be used directly with curl:
+# Without auto-installing dependencies:
+#   curl -sSL https://code.foss.global/serve.zone/nupst/raw/branch/main/install.sh | sudo bash
+# With auto-installing dependencies:
+#   curl -sSL https://code.foss.global/serve.zone/nupst/raw/branch/main/install.sh | sudo bash -s -- -y
+# 
+# Options:
+#   -y, --yes     Automatically answer yes to all prompts
+#   -h, --help    Show this help message
+
+# Parse command line arguments
+AUTO_YES=0
+SHOW_HELP=0
+
+for arg in "$@"; do
+  case $arg in
+    -y|--yes)
+      AUTO_YES=1
+      shift
+      ;;
+    -h|--help)
+      SHOW_HELP=1
+      shift
+      ;;
+    *)
+      # Unknown option
+      ;;
+  esac
+done
+
+if [ $SHOW_HELP -eq 1 ]; then
+  echo "NUPST Installer Script"
+  echo "Usage: $0 [options]"
+  echo ""
+  echo "Options:"
+  echo "  -y, --yes     Automatically answer yes to all prompts"
+  echo "  -h, --help    Show this help message"
+  exit 0
+fi
 
 # Check if running as root
 if [ "$EUID" -ne 0 ]; then
@@ -17,6 +55,78 @@ if [ ! -t 0 ]; then
   PIPED=1
 fi
 
+# Helper function to detect OS type
+detect_os() {
+  if [ -f /etc/os-release ]; then
+    . /etc/os-release
+    OS=$ID
+  elif type lsb_release >/dev/null 2>&1; then
+    OS=$(lsb_release -si | tr '[:upper:]' '[:lower:]')
+  elif [ -f /etc/lsb-release ]; then
+    . /etc/lsb-release
+    OS=$DISTRIB_ID
+  elif [ -f /etc/debian_version ]; then
+    OS="debian"
+  elif [ -f /etc/redhat-release ]; then
+    if grep -q "CentOS" /etc/redhat-release; then
+      OS="centos"
+    elif grep -q "Fedora" /etc/redhat-release; then
+      OS="fedora"
+    else
+      OS="rhel"
+    fi
+  else
+    OS=$(uname -s)
+  fi
+  echo $OS
+}
+
+# Helper function to install git
+install_git() {
+  OS=$(detect_os)
+  echo "Detected OS: $OS"
+  
+  case "$OS" in
+    ubuntu|debian|pop|mint|elementary|kali|zorin)
+      echo "Installing git using apt..."
+      apt-get update && apt-get install -y git
+      ;;
+    fedora|rhel|centos|almalinux|rocky)
+      echo "Installing git using dnf/yum..."
+      if command -v dnf &> /dev/null; then
+        dnf install -y git
+      else
+        yum install -y git
+      fi
+      ;;
+    arch|manjaro|endeavouros|garuda)
+      echo "Installing git using pacman..."
+      pacman -Sy --noconfirm git
+      ;;
+    opensuse*|suse|sles)
+      echo "Installing git using zypper..."
+      zypper install -y git
+      ;;
+    alpine)
+      echo "Installing git using apk..."
+      apk add git
+      ;;
+    *)
+      echo "Unsupported OS: $OS"
+      echo "Please install git manually and run the installer again."
+      exit 1
+      ;;
+  esac
+  
+  # Check if git was installed successfully
+  if ! command -v git &> /dev/null; then
+    echo "Failed to install git. Please install git manually and run the installer again."
+    exit 1
+  fi
+  
+  echo "Git installed successfully."
+}
+
 # Define installation directory
 INSTALL_DIR="/opt/nupst"
 REPO_URL="https://code.foss.global/serve.zone/nupst.git"
@@ -26,8 +136,23 @@ if [ $PIPED -eq 1 ]; then
   
   # Check if git is installed
   if ! command -v git &> /dev/null; then
-    echo "Git is required but not installed. Please install git first."
+    echo "Git is required but not installed."
-    exit 1
+    
+    if [ $AUTO_YES -eq 1 ]; then
+      echo "Auto-installing git (-y flag provided)..."
+      install_git
+    else
+      read -p "Would you like to install git now? (y/N): " install_git_prompt
+      
+      if [[ "$install_git_prompt" =~ ^[Yy]$ ]]; then
+        install_git
+      else
+        echo "Git installation skipped. Please install git manually and run the installer again."
+        echo "Alternatively, you can run the installer with -y flag to automatically install git:"
+        echo "  sudo bash install.sh -y"
+        exit 1
+      fi
+    fi
   fi
   
   # Check if installation directory exists

license

@@ -0,0 +1,21 @@
+The MIT License (MIT)
+
+Copyright (c) 2016 Task Venture Capital GmbH
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.

package.json

@@ -1,6 +1,6 @@
 {
   "name": "@serve.zone/nupst",
-  "version": "2.0.0",
+  "version": "2.4.0",
   "description": "Node.js UPS Shutdown Tool for SNMP-enabled UPS devices",
   "main": "dist/index.js",
   "bin": {

readme.md

@@ -21,6 +21,9 @@ NUPST is a command-line tool that monitors SNMP-enabled UPS devices and initiate
 ```bash
 # Install directly without cloning the repository (requires root privileges)
 curl -sSL https://code.foss.global/serve.zone/nupst/raw/branch/main/install.sh | sudo bash
+
+# Install with auto-yes for dependencies (will install git automatically if needed)
+curl -sSL https://code.foss.global/serve.zone/nupst/raw/branch/main/install.sh | sudo bash -s -- -y
 ```
 
 ### Direct from Git
@@ -33,20 +36,58 @@ cd nupst
 # Option 1: Quick install (requires root privileges)
 sudo ./install.sh
 
+# Option 1a: Quick install with auto-yes for dependencies
+sudo ./install.sh -y
+
 # Option 2: Manual setup
 ./setup.sh
 sudo ln -s $(pwd)/bin/nupst /usr/local/bin/nupst
 ```
 
+### Installation Options
+
+The installer script (`install.sh`) supports the following options:
+
+```
+-y, --yes     Automatically answer yes to all prompts (like installing git)
+-h, --help    Show the help message
+```
+
 ### From NPM
 
 ```bash
 npm install -g @serve.zone/nupst
 ```
 
+## System Changes
+
+When installed, NUPST makes the following changes to your system:
+
+### File System Changes
+
+| Path | Description |
+|------|-------------|
+| `/opt/nupst/` | Main installation directory containing the NUPST files |
+| `/etc/nupst/config.json` | Configuration file |
+| `/usr/local/bin/nupst` | Symlink to the NUPST executable |
+| `/etc/systemd/system/nupst.service` | Systemd service file (when enabled) |
+
+### Service Changes
+
+- Creates and enables a systemd service called `nupst.service` (when enabled with `nupst enable`)
+- The service runs with root permissions to allow system shutdown capabilities
+
+### Network Access
+
+- NUPST only communicates with your UPS device via SNMP (default port 161)
+- Brief connections to npmjs.org to check for updates
+
 ## Uninstallation
 
 ```bash
+# Using the CLI tool:
+sudo nupst uninstall
+
 # If installed from git repository:
 cd /path/to/nupst
 sudo ./uninstall.sh
@@ -57,9 +98,10 @@ npm uninstall -g @serve.zone/nupst
 
 The uninstaller will:
 - Stop and disable the systemd service (if installed)
-- Remove the systemd service file
+- Remove the systemd service file from `/etc/systemd/system/nupst.service`
-- Remove the symlink from /usr/local/bin
+- Remove the symlink from `/usr/local/bin/nupst`
-- Optionally remove configuration files from /etc/nupst
+- Optionally remove configuration files from `/etc/nupst/`
+- Remove the repository directory from `/opt/nupst/` (when using `nupst uninstall`)
 
 ## Usage
 
@@ -76,7 +118,9 @@ Usage:
   nupst status         - Show status of the systemd service and UPS status
   nupst setup          - Run the interactive setup to configure SNMP settings
   nupst test           - Test the current configuration by connecting to the UPS
+  nupst config         - Display the current configuration
   nupst update         - Update NUPST from repository and refresh systemd service (requires root)
+  nupst uninstall      - Completely uninstall NUPST from the system (requires root)
   nupst help           - Show this help message
 
 Options:

ts/00_commitinfo_data.ts

@@ -3,6 +3,6 @@
  */
 export const commitinfo = {
   name: '@serve.zone/nupst',
-  version: '2.0.0',
+  version: '2.4.0',
   description: 'Node.js UPS Shutdown Tool for SNMP-enabled UPS devices'
 }

ts/cli.ts

@@ -1,4 +1,7 @@
 import { execSync } from 'child_process';
+import { promises as fs } from 'fs';
+import { dirname, join } from 'path';
+import { fileURLToPath } from 'url';
 import { Nupst } from './nupst.js';
 
 /**
@@ -94,6 +97,14 @@ export class NupstCli {
       case 'update':
         await this.update();
         break;
+        
+      case 'uninstall':
+        await this.uninstall();
+        break;
+        
+      case 'config':
+        await this.showConfig();
+        break;
 
       case 'help':
       default:
@@ -182,7 +193,9 @@ export class NupstCli {
    * Show status of the systemd service and UPS
    */
   private async status(): Promise<void> {
-    await this.nupst.getSystemd().getStatus();
+    // Extract debug options from args array
+    const debugOptions = this.extractDebugOptions(process.argv);
+    await this.nupst.getSystemd().getStatus(debugOptions.debugMode);
   }
 
   /**
@@ -363,7 +376,9 @@ Usage:
   nupst status         - Show status of the systemd service and UPS status
   nupst setup          - Run the interactive setup to configure SNMP settings
   nupst test           - Test the current configuration by connecting to the UPS
+  nupst config         - Display the current configuration
   nupst update         - Update NUPST from repository and refresh systemd service (requires root)
+  nupst uninstall      - Completely uninstall NUPST from the system (requires root)
   nupst help           - Show this help message
 
 Options:
@@ -819,7 +834,7 @@ Options:
   }
 
   /**
-   * Optionally enable systemd service
+   * Optionally enable and start systemd service
    * @param prompt Function to prompt for user input
    */
   private async optionallyEnableService(prompt: (question: string) => Promise<string>): Promise<void> {
@@ -828,9 +843,203 @@ Options:
     } else {
       const setupService = await prompt('Would you like to enable NUPST as a system service? (y/N): ');
       if (setupService.toLowerCase() === 'y') {
-        await this.nupst.getSystemd().install();
+        try {
-        console.log('Service installed. Use "nupst start" to start the service.');
+          await this.nupst.getSystemd().install();
+          console.log('Service installed and enabled to start on boot.');
+          
+          // Ask if the user wants to start the service now
+          const startService = await prompt('Would you like to start the NUPST service now? (Y/n): ');
+          if (startService.toLowerCase() !== 'n') {
+            await this.nupst.getSystemd().start();
+            console.log('NUPST service started successfully.');
+          } else {
+            console.log('Service not started. Use "nupst start" to start the service manually.');
+          }
+        } catch (error) {
+          console.error(`Failed to setup service: ${error.message}`);
+        }
       }
     }
   }
+  
+  /**
+   * Display the current configuration
+   */
+  private async showConfig(): Promise<void> {
+    try {
+      // Try to load configuration
+      try {
+        await this.nupst.getDaemon().loadConfig();
+      } catch (error) {
+        console.error('┌─ Configuration Error ─────────────────────┐');
+        console.error('│ No configuration found.');
+        console.error('│ Please run \'nupst setup\' first to create a configuration.');
+        console.error('└──────────────────────────────────────────┘');
+        return;
+      }
+      
+      // Get current configuration
+      const config = this.nupst.getDaemon().getConfig();
+      
+      console.log('┌─ NUPST Configuration ──────────────────────┐');
+      
+      // SNMP Settings
+      console.log('│ SNMP Settings:');
+      console.log(`│   Host: ${config.snmp.host}`);
+      console.log(`│   Port: ${config.snmp.port}`);
+      console.log(`│   Version: ${config.snmp.version}`);
+      console.log(`│   UPS Model: ${config.snmp.upsModel || 'cyberpower'}`);
+      
+      if (config.snmp.version === 1 || config.snmp.version === 2) {
+        console.log(`│   Community: ${config.snmp.community}`);
+      } else if (config.snmp.version === 3) {
+        console.log(`│   Security Level: ${config.snmp.securityLevel}`);
+        console.log(`│   Username: ${config.snmp.username}`);
+        
+        // Show auth and privacy details based on security level
+        if (config.snmp.securityLevel === 'authNoPriv' || config.snmp.securityLevel === 'authPriv') {
+          console.log(`│   Auth Protocol: ${config.snmp.authProtocol || 'None'}`);
+        }
+        
+        if (config.snmp.securityLevel === 'authPriv') {
+          console.log(`│   Privacy Protocol: ${config.snmp.privProtocol || 'None'}`);
+        }
+        
+        // Show timeout value
+        console.log(`│   Timeout: ${config.snmp.timeout / 1000} seconds`);
+      }
+      
+      // Show OIDs if custom model is selected
+      if (config.snmp.upsModel === 'custom' && config.snmp.customOIDs) {
+        console.log('│ Custom OIDs:');
+        console.log(`│   Power Status: ${config.snmp.customOIDs.POWER_STATUS || 'Not set'}`);
+        console.log(`│   Battery Capacity: ${config.snmp.customOIDs.BATTERY_CAPACITY || 'Not set'}`);
+        console.log(`│   Battery Runtime: ${config.snmp.customOIDs.BATTERY_RUNTIME || 'Not set'}`);
+      }
+      
+      // Thresholds
+      console.log('│ Thresholds:');
+      console.log(`│   Battery: ${config.thresholds.battery}%`);
+      console.log(`│   Runtime: ${config.thresholds.runtime} minutes`);
+      console.log(`│ Check Interval: ${config.checkInterval / 1000} seconds`);
+      
+      // Configuration file location
+      console.log('│');
+      console.log('│ Configuration File Location:');
+      console.log('│   /etc/nupst/config.json');
+      
+      console.log('└──────────────────────────────────────────┘');
+      
+      // Show service status
+      try {
+        const isActive = execSync('systemctl is-active nupst.service || true').toString().trim() === 'active';
+        const isEnabled = execSync('systemctl is-enabled nupst.service || true').toString().trim() === 'enabled';
+        
+        console.log('┌─ Service Status ─────────────────────────┐');
+        console.log(`│ Service Active: ${isActive ? 'Yes' : 'No'}`);
+        console.log(`│ Service Enabled: ${isEnabled ? 'Yes' : 'No'}`);
+        console.log('└──────────────────────────────────────────┘');
+      } catch (error) {
+        // Ignore errors checking service status
+      }
+      
+    } catch (error) {
+      console.error(`Failed to display configuration: ${error.message}`);
+    }
+  }
+
+  /**
+   * Completely uninstall NUPST from the system
+   */
+  private async uninstall(): Promise<void> {
+    // Check if running as root
+    this.checkRootAccess('This command must be run as root.');
+
+    try {
+      // Import readline module for user input
+      const readline = await import('readline');
+      
+      const rl = readline.createInterface({
+        input: process.stdin,
+        output: process.stdout
+      });
+      
+      // Helper function to prompt for input
+      const prompt = (question: string): Promise<string> => {
+        return new Promise((resolve) => {
+          rl.question(question, (answer: string) => {
+            resolve(answer);
+          });
+        });
+      };
+
+      console.log('\nNUPST Uninstaller');
+      console.log('===============');
+      console.log('This will completely remove NUPST from your system.\n');
+
+      // Ask about removing configuration
+      const removeConfig = await prompt('Do you want to remove the NUPST configuration files? (y/N): ');
+      
+      // Find the uninstall.sh script location
+      let uninstallScriptPath: string;
+      
+      // Try to determine script location based on executable path
+      try {
+        // For ESM, we can use import.meta.url, but since we might be in CJS
+        // we'll use a more reliable approach based on process.argv[1]
+        const binPath = process.argv[1];
+        const modulePath = dirname(dirname(binPath));
+        uninstallScriptPath = join(modulePath, 'uninstall.sh');
+        
+        // Check if the script exists
+        await fs.access(uninstallScriptPath);
+      } catch (error) {
+        // If we can't find it in the expected location, try common installation paths
+        const commonPaths = [
+          '/opt/nupst/uninstall.sh',
+          join(process.cwd(), 'uninstall.sh')
+        ];
+        
+        for (const path of commonPaths) {
+          try {
+            await fs.access(path);
+            uninstallScriptPath = path;
+            break;
+          } catch {
+            // Continue to next path
+          }
+        }
+        
+        if (!uninstallScriptPath) {
+          console.error('Could not locate uninstall.sh script. Aborting uninstall.');
+          rl.close();
+          process.exit(1);
+        }
+      }
+      
+      // Close readline before executing script
+      rl.close();
+      
+      // Execute uninstall.sh with the appropriate option
+      console.log(`\nRunning uninstaller from ${uninstallScriptPath}...`);
+      
+      // Pass the configuration removal option as an environment variable
+      const env = {
+        ...process.env,
+        REMOVE_CONFIG: removeConfig.toLowerCase() === 'y' ? 'yes' : 'no',
+        REMOVE_REPO: 'yes',  // Always remove repo as requested
+        NUPST_CLI_CALL: 'true'  // Flag to indicate this is being called from CLI
+      };
+      
+      // Run the uninstall script with sudo
+      execSync(`sudo bash ${uninstallScriptPath}`, { 
+        env,
+        stdio: 'inherit'  // Show output in the terminal
+      });
+      
+    } catch (error) {
+      console.error(`Uninstall failed: ${error.message}`);
+      process.exit(1);
+    }
+  }
 }

ts/snmp/manager.ts

@@ -514,9 +514,10 @@ export class NupstSnmp {
   public async initiateShutdown(reason: string): Promise<void> {
     console.log(`Initiating system shutdown due to: ${reason}`);
     try {
-      // Execute shutdown command
+      // Execute shutdown command with 5 minute delay to allow for VM graceful shutdown
-      const { stdout } = await execAsync('shutdown -h +1 "UPS battery critical, shutting down in 1 minute"');
+      const { stdout } = await execAsync('shutdown -h +5 "UPS battery critical, shutting down in 5 minutes"');
       console.log('Shutdown initiated:', stdout);
+      console.log('Allowing 5 minutes for VMs to shut down safely');
     } catch (error) {
       console.error('Failed to initiate shutdown:', error);
       // Try a different method if first one fails

ts/systemd.ts

@@ -126,9 +126,18 @@ WantedBy=multi-user.target
 
   /**
    * Get status of the systemd service and UPS
+   * @param debugMode Whether to enable debug mode for SNMP
    */
-  public async getStatus(): Promise<void> {
+  public async getStatus(debugMode: boolean = false): Promise<void> {
     try {
+      // Enable debug mode if requested
+      if (debugMode) {
+        console.log('┌─ Debug Mode ─────────────────────────────┐');
+        console.log('│ SNMP debugging enabled - detailed logs will be shown');
+        console.log('└──────────────────────────────────────────┘');
+        this.daemon.getNupstSnmp().enableDebug();
+      }
+      
       // Display version information
       this.daemon.getNupstSnmp().getNupst().logVersionInfo();
       
@@ -170,6 +179,8 @@ WantedBy=multi-user.target
    */
   private async displayUpsStatus(): Promise<void> {
     try {
+      // Explicitly load the configuration first to ensure it's up-to-date
+      await this.daemon.loadConfig();
       const config = this.daemon.getConfig();
       const snmp = this.daemon.getNupstSnmp();
       
@@ -179,6 +190,11 @@ WantedBy=multi-user.target
         timeout: Math.min(config.snmp.timeout, 10000) // Use at most 10 seconds for status check
       };
       
+      console.log('┌─ Connecting to UPS... ────────────────────┐');
+      console.log(`│ Host: ${config.snmp.host}:${config.snmp.port}`);
+      console.log(`│ UPS Model: ${config.snmp.upsModel || 'cyberpower'}`);
+      console.log('└──────────────────────────────────────────┘');
+      
       const status = await snmp.getUpsStatus(snmpConfig);
       
       console.log('┌─ UPS Status ───────────────────────────────┐');

uninstall.sh

@@ -5,13 +5,22 @@
 
 # Check if running as root
 if [ "$EUID" -ne 0 ]; then
-  echo "Please run as root (sudo ./uninstall.sh)"
+  echo "Please run as root (sudo nupst uninstall or sudo ./uninstall.sh)"
   exit 1
 fi
 
+# This script can be called directly or through the CLI
+# When called through the CLI, environment variables are set
+# REMOVE_CONFIG=yes|no - whether to remove configuration files
+# REMOVE_REPO=yes|no - whether to remove the repository
+
+# If not set through CLI, use defaults
+REMOVE_CONFIG=${REMOVE_CONFIG:-"no"}
+REMOVE_REPO=${REMOVE_REPO:-"no"}
+
 echo "NUPST Uninstaller"
 echo "================="
-echo "This script will completely remove NUPST from your system."
+echo "This will completely remove NUPST from your system."
 
 # Find the directory where this script is located
 SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )"
@@ -37,20 +46,52 @@ if [ -L "/usr/local/bin/nupst" ]; then
   rm -f /usr/local/bin/nupst
 fi
 
-# Step 3: Ask about removing configuration
+# Step 3: Remove configuration if requested
-read -p "Do you want to remove the NUPST configuration files? (y/N) " -n 1 -r
+if [ "$REMOVE_CONFIG" = "yes" ]; then
-echo
-if [[ $REPLY =~ ^[Yy]$ ]]; then
   echo "Removing configuration files..."
   rm -rf /etc/nupst
+else
+  # If not called through CLI, ask user
+  if [ -z "$NUPST_CLI_CALL" ]; then
+    read -p "Do you want to remove the NUPST configuration files? (y/N) " -n 1 -r
+    echo
+    if [[ $REPLY =~ ^[Yy]$ ]]; then
+      echo "Removing configuration files..."
+      rm -rf /etc/nupst
+    fi
+  fi
 fi
 
-# Step 4: Check if this was a git installation
+# Step 4: Remove repository if requested
-if [ -d "$SCRIPT_DIR/.git" ]; then
+if [ "$REMOVE_REPO" = "yes" ]; then
-  echo
+  if [ -d "$SCRIPT_DIR/.git" ]; then
-  echo "This appears to be a git installation. The local repository will remain intact."
+    echo "Removing NUPST repository directory..."
-  echo "If you wish to completely remove it, you can delete the directory:"
+    
-  echo "  rm -rf $SCRIPT_DIR"
+    # Get parent directory to remove it after the script exits
+    PARENT_DIR=$(dirname "$SCRIPT_DIR")
+    REPO_NAME=$(basename "$SCRIPT_DIR")
+    
+    # Create a temporary cleanup script
+    CLEANUP_SCRIPT=$(mktemp)
+    echo "#!/bin/bash" > "$CLEANUP_SCRIPT"
+    echo "sleep 1" >> "$CLEANUP_SCRIPT"
+    echo "rm -rf \"$SCRIPT_DIR\"" >> "$CLEANUP_SCRIPT"
+    echo "echo \"NUPST repository has been removed.\"" >> "$CLEANUP_SCRIPT"
+    chmod +x "$CLEANUP_SCRIPT"
+    
+    # Run the cleanup script in the background
+    nohup "$CLEANUP_SCRIPT" > /dev/null 2>&1 &
+    
+    echo "NUPST repository will be removed after uninstaller exits."
+  else 
+    echo "No git repository found."
+  fi
+else
+  # If not requested, just display info
+  if [ -d "$SCRIPT_DIR/.git" ]; then
+    echo
+    echo "NUPST repository at $SCRIPT_DIR will remain intact."
+  fi
 fi
 
 # Check for npm global installation