fix(migration): detect flat structure in upsDevices for proper v3→v4 migration

The previous migration only checked for upsList field, but saveConfig()
strips upsList when saving, creating a race condition. If the daemon
restarted with a partially-migrated config (upsDevices with flat structure),
the migration wouldn't run because it only looked for upsList.

Now shouldRun() also detects:
- upsDevices with flat structure (host at top level, no snmp object)

And migrate() handles both:
- config.upsList (pure v3)
- config.upsDevices with flat structure (partially migrated)

This fixes the "Cannot read properties of undefined (reading 'host')"
error that occurred when configs had upsDevices but flat structure.

deno.json

@@ -1,6 +1,6 @@
 {
   "name": "@serve.zone/nupst",
-  "version": "4.0.4",
+  "version": "4.0.5",
   "exports": "./mod.ts",
   "tasks": {
     "dev": "deno run --allow-all mod.ts",

install.sh

@@ -10,15 +10,7 @@
 #   With version specification:
 #     curl -sSL https://code.foss.global/serve.zone/nupst/raw/branch/main/install.sh | sudo bash -s -- --version v4.0.0
 #
-#   Non-interactive mode (auto-confirm):
-#     curl -sSL https://code.foss.global/serve.zone/nupst/raw/branch/main/install.sh | sudo bash -s -- -y
-#
-#   Downloaded script:
-#     curl -sSL https://code.foss.global/serve.zone/nupst/raw/branch/main/install.sh -o nupst-install.sh
-#     sudo bash nupst-install.sh
-#
 # Options:
-#   -y, --yes              Automatically answer yes to all prompts
 #   -h, --help             Show this help message
 #   --version VERSION      Install specific version (e.g., v4.0.0)
 #   --install-dir DIR      Installation directory (default: /opt/nupst)
@@ -26,7 +18,6 @@
 set -e
 
 # Default values
-AUTO_YES=0
 SHOW_HELP=0
 SPECIFIED_VERSION=""
 INSTALL_DIR="/opt/nupst"
@@ -36,10 +27,6 @@ GITEA_REPO="serve.zone/nupst"
 # Parse command line arguments
 while [[ $# -gt 0 ]]; do
   case $1 in
-    -y|--yes)
-      AUTO_YES=1
-      shift
-      ;;
     -h|--help)
       SHOW_HELP=1
       shift
@@ -67,7 +54,6 @@ if [ $SHOW_HELP -eq 1 ]; then
   echo "Usage: $0 [options]"
   echo ""
   echo "Options:"
-  echo "  -y, --yes              Automatically answer yes to all prompts"
   echo "  -h, --help             Show this help message"
   echo "  --version VERSION      Install specific version (e.g., v4.0.0)"
   echo "  --install-dir DIR      Installation directory (default: /opt/nupst)"
@@ -78,9 +64,6 @@ if [ $SHOW_HELP -eq 1 ]; then
   echo ""
   echo "  # Install specific version"
   echo "  curl -sSL https://code.foss.global/serve.zone/nupst/raw/branch/main/install.sh | sudo bash -s -- --version v4.0.0"
-  echo ""
-  echo "  # Non-interactive installation"
-  echo "  curl -sSL https://code.foss.global/serve.zone/nupst/raw/branch/main/install.sh | sudo bash -s -- -y"
   exit 0
 fi
 
@@ -90,36 +73,6 @@ if [ "$EUID" -ne 0 ]; then
   exit 1
 fi
 
-# Detect if script is being piped or run directly
-INTERACTIVE=1
-if [ ! -t 0 ] || [ ! -t 1 ]; then
-  # Either stdin or stdout is not a terminal
-  if [ $AUTO_YES -ne 1 ]; then
-    echo "Script detected it's running in a non-interactive environment without -y flag."
-    echo "Attempting to find a controlling terminal for interactive prompts..."
-    # Try to use a controlling terminal for user input
-    if exec < /dev/tty 2>/dev/null && [ -t 0 ]; then
-      INTERACTIVE=1
-    else
-      INTERACTIVE=0
-    fi
-
-    if [ $INTERACTIVE -eq 0 ]; then
-      echo "ERROR: No controlling terminal available for interactive prompts."
-      echo ""
-      echo "For interactive installation (RECOMMENDED):"
-      echo "  curl -sSL https://code.foss.global/serve.zone/nupst/raw/branch/main/install.sh -o nupst-install.sh"
-      echo "  sudo bash nupst-install.sh"
-      echo ""
-      echo "For non-interactive installation with auto-confirm:"
-      echo "  curl -sSL https://code.foss.global/serve.zone/nupst/raw/branch/main/install.sh | sudo bash -s -- -y"
-      exit 1
-    else
-      echo "Interactive terminal found, continuing with prompts..."
-    fi
-  fi
-fi
-
 # Helper function to detect OS and architecture
 detect_platform() {
   local os=$(uname -s)
@@ -229,22 +182,6 @@ if [ -d "$INSTALL_DIR" ]; then
     echo ""
   fi
 
-  if [ $AUTO_YES -eq 0 ] && [ $INTERACTIVE -eq 1 ]; then
-    if [ $OLD_NODE_INSTALL -eq 1 ]; then
-      echo "This will replace your Node.js installation with a pre-compiled binary."
-      echo "Your configuration in /etc/nupst/config.json will be preserved."
-      echo ""
-    fi
-    echo "Installation directory already exists: $INSTALL_DIR"
-    echo "Do you want to update/reinstall? (Y/n): "
-    read -r update_confirm
-
-    if [[ "$update_confirm" =~ ^[Nn]$ ]]; then
-      echo "Installation cancelled."
-      exit 0
-    fi
-  fi
-
   echo "Updating existing installation at $INSTALL_DIR..."
 
   # Check if service exists (enabled or running) and stop it if active
@@ -273,17 +210,6 @@ if [ -d "$INSTALL_DIR" ]; then
     echo "Old installation files removed."
   fi
 else
-  if [ $AUTO_YES -eq 0 ] && [ $INTERACTIVE -eq 1 ]; then
-    echo "NUPST will be installed to: $INSTALL_DIR"
-    echo "Continue? (Y/n): "
-    read -r install_confirm
-
-    if [[ "$install_confirm" =~ ^[Nn]$ ]]; then
-      echo "Installation cancelled."
-      exit 0
-    fi
-  fi
-
   echo "Creating installation directory: $INSTALL_DIR"
   mkdir -p "$INSTALL_DIR"
 fi
@@ -329,22 +255,8 @@ else
 fi
 
 # Create symlink for global access
-if [ $AUTO_YES -eq 0 ] && [ $INTERACTIVE -eq 1 ]; then
+ln -sf "$BINARY_PATH" "$BIN_DIR/nupst"
-  echo "Create symlink in $BIN_DIR for global access? (Y/n): "
+echo "Symlink created: $BIN_DIR/nupst -> $BINARY_PATH"
-  read -r symlink_confirm
-
-  if [[ ! "$symlink_confirm" =~ ^[Nn]$ ]]; then
-    ln -sf "$BINARY_PATH" "$BIN_DIR/nupst"
-    echo "Symlink created: $BIN_DIR/nupst -> $BINARY_PATH"
-  else
-    echo "Symlink creation skipped."
-    echo "To use NUPST, run: $BINARY_PATH"
-    echo "Or manually create symlink: sudo ln -sf $BINARY_PATH $BIN_DIR/nupst"
-  fi
-else
-  ln -sf "$BINARY_PATH" "$BIN_DIR/nupst"
-  echo "Symlink created: $BIN_DIR/nupst -> $BINARY_PATH"
-fi
 
 echo ""
 

readme.md

@@ -29,15 +29,8 @@ dependencies.
 The easiest way to install NUPST is using the automated installer:
 
 ```bash
-# Download and run installer (most reliable)
+# One-line installation
-curl -sSL https://code.foss.global/serve.zone/nupst/raw/branch/main/install.sh -o nupst-install.sh
+curl -sSL https://code.foss.global/serve.zone/nupst/raw/branch/main/install.sh | sudo bash
-sudo bash nupst-install.sh
-rm nupst-install.sh
-```
-
-```bash
-# One-line installation (non-interactive with auto-confirm)
-curl -sSL https://code.foss.global/serve.zone/nupst/raw/branch/main/install.sh | sudo bash -s -- -y
 ```
 
 The installer will:
@@ -76,7 +69,6 @@ sudo mv nupst /usr/local/bin/nupst
 The installer script (`install.sh`) supports the following options:
 
 ```
--y, --yes                Automatically answer yes to all prompts
 -h, --help               Show help message
 --version VERSION        Install specific version (e.g., --version v4.0.0)
 --install-dir DIR        Custom installation directory (default: /opt/nupst)
@@ -373,7 +365,7 @@ sudo nupst service disable
 Re-run the installer to update to the latest version:
 
 ```bash
-curl -sSL https://code.foss.global/serve.zone/nupst/raw/branch/main/install.sh | sudo bash -s -- -y
+curl -sSL https://code.foss.global/serve.zone/nupst/raw/branch/main/install.sh | sudo bash
 ```
 
 The installer will:
@@ -461,7 +453,7 @@ The installer script automatically handles the entire migration while preserving
 
 ```bash
 # Run the installer (handles stop/update/restart automatically)
-curl -sSL https://code.foss.global/serve.zone/nupst/raw/branch/main/install.sh | sudo bash -s -- -y
+curl -sSL https://code.foss.global/serve.zone/nupst/raw/branch/main/install.sh | sudo bash
 
 # Verify
 nupst service status

ts/migrations/migration-v3-to-v4.ts

@@ -44,17 +44,30 @@ export class MigrationV3ToV4 extends BaseMigration {
   readonly toVersion = '4.0';
 
   async shouldRun(config: any): Promise<boolean> {
-    // V3 format has upsList instead of upsDevices
+    // V3 format has upsList OR has upsDevices with flat structure (host at top level)
-    return !!config.upsList && !config.upsDevices;
+    if (config.upsList && !config.upsDevices) {
+      return true; // Classic v3 with upsList
+    }
+
+    // Check if upsDevices exists but has flat structure (v3 format)
+    if (config.upsDevices && config.upsDevices.length > 0) {
+      const firstDevice = config.upsDevices[0];
+      // V3 has host at top level, v4 has it nested in snmp object
+      return !!firstDevice.host && !firstDevice.snmp;
+    }
+
+    return false;
   }
 
   async migrate(config: any): Promise<any> {
     logger.info(`${this.getName()}: Migrating v3 config to v4 format...`);
-    logger.dim(`  - Renaming upsList → upsDevices`);
     logger.dim(`  - Restructuring UPS devices (flat → nested snmp config)`);
 
+    // Get devices from either upsList or upsDevices (for partially migrated configs)
+    const sourceDevices = config.upsList || config.upsDevices;
+
     // Transform each UPS device from v3 flat structure to v4 nested structure
-    const transformedDevices = config.upsList.map((device: any) => {
+    const transformedDevices = sourceDevices.map((device: any) => {
       // Build SNMP config object
       const snmpConfig: any = {
         host: device.host,