feat(status): display version and update status in nupst status command

- Add version display at the top of status output
- Check for available updates and notify user
- Show "Up to date" or "Update available" with version
- Display before service and UPS status information
- Improves user awareness of software version and updates

Bumps version to 4.1.4

deno.json

@@ -1,6 +1,6 @@
 {
   "name": "@serve.zone/nupst",
-  "version": "4.0.5",
+  "version": "4.1.4",
   "exports": "./mod.ts",
   "tasks": {
     "dev": "deno run --allow-all mod.ts",

ts/00_commitinfo_data.ts

@@ -6,5 +6,5 @@ import denoConfig from '../deno.json' with { type: 'json' };
 export const commitinfo = {
   name: denoConfig.name,
   version: denoConfig.version,
-  description: 'Deno-powered UPS monitoring tool for SNMP-enabled UPS devices',
+  description: 'Network UPS Shutdown Tool (https://nupst.serve.zone)',
 };

ts/cli.ts

@@ -469,7 +469,7 @@ export class NupstCli {
   private showVersion(): void {
     const version = this.nupst.getVersion();
     logger.log(`NUPST version ${version}`);
-    logger.log('Deno-powered UPS monitoring tool');
+    logger.log('Network UPS Shutdown Tool (https://nupst.serve.zone)');
   }
 
   /**

ts/cli/group-handler.ts

@@ -192,6 +192,7 @@ export class GroupHandler {
         logger.log('\nGroup setup complete!');
       } finally {
         rl.close();
+        process.stdin.destroy();
       }
     } catch (error) {
       logger.error(`Add group error: ${error instanceof Error ? error.message : String(error)}`);
@@ -309,6 +310,7 @@ export class GroupHandler {
         logger.log('\nGroup edit complete!');
       } finally {
         rl.close();
+        process.stdin.destroy();
       }
     } catch (error) {
       logger.error(`Edit group error: ${error instanceof Error ? error.message : String(error)}`);
@@ -366,6 +368,7 @@ export class GroupHandler {
       });
 
       rl.close();
+      process.stdin.destroy();
 
       if (confirm !== 'y' && confirm !== 'yes') {
         logger.log('Deletion cancelled.');

ts/cli/service-handler.ts

@@ -129,81 +129,57 @@ export class ServiceHandler {
     try {
       // Check if running as root
       this.checkRootAccess(
-        'This command must be run as root to update NUPST and refresh the systemd service.',
+        'This command must be run as root to update NUPST.',
       );
 
-      const boxWidth = 45;
-      logger.logBoxTitle('NUPST Update Process', boxWidth);
-      logger.logBoxLine('Updating NUPST from repository...');
-
-      // Determine the installation directory (assuming it's either /opt/nupst or the current directory)
-      const { existsSync } = await import('fs');
-      let installDir = '/opt/nupst';
-
-      if (!existsSync(installDir)) {
-        // If not installed in /opt/nupst, use the current directory
-        const { dirname } = await import('path');
-        installDir = dirname(dirname(process.argv[1])); // Go up two levels from the executable
-        logger.logBoxLine(`Using local installation directory: ${installDir}`);
-      }
+      console.log('');
+      logger.info('Checking for updates...');
 
       try {
-        // 1. Update the repository
-        logger.logBoxLine('Pulling latest changes from git repository...');
-        execSync(`cd ${installDir} && git fetch origin && git reset --hard origin/main`, {
-          stdio: 'pipe',
+        // Get current version
+        const currentVersion = this.nupst.getVersion();
+
+        // Fetch latest version from Gitea API
+        const apiUrl = 'https://code.foss.global/api/v1/repos/serve.zone/nupst/releases/latest';
+        const response = execSync(`curl -sSL ${apiUrl}`).toString();
+        const release = JSON.parse(response);
+        const latestVersion = release.tag_name; // e.g., "v4.0.7"
+
+        // Normalize versions for comparison (ensure both have "v" prefix)
+        const normalizedCurrent = currentVersion.startsWith('v') ? currentVersion : `v${currentVersion}`;
+        const normalizedLatest = latestVersion.startsWith('v') ? latestVersion : `v${latestVersion}`;
+
+        logger.dim(`Current version: ${normalizedCurrent}`);
+        logger.dim(`Latest version:  ${normalizedLatest}`);
+        console.log('');
+
+        // Compare normalized versions
+        if (normalizedCurrent === normalizedLatest) {
+          logger.success('Already up to date!');
+          console.log('');
+          return;
+        }
+
+        logger.info(`New version available: ${latestVersion}`);
+        logger.dim('Downloading and installing...');
+        console.log('');
+
+        // Download and run the install script
+        // This handles everything: download binary, stop service, replace, restart
+        const installUrl = 'https://code.foss.global/serve.zone/nupst/raw/branch/main/install.sh';
+
+        execSync(`curl -sSL ${installUrl} | bash`, {
+          stdio: 'inherit', // Show install script output to user
         });
 
-        // 2. Run the install.sh script
-        logger.logBoxLine('Running install.sh to update NUPST...');
-        execSync(`cd ${installDir} && bash ./install.sh`, { stdio: 'pipe' });
-
-        // 3. Run the setup.sh script with force flag to update Node.js and dependencies
-        logger.logBoxLine('Running setup.sh to update Node.js and dependencies...');
-        execSync(`cd ${installDir} && bash ./setup.sh --force`, { stdio: 'pipe' });
-
-        // 4. Refresh the systemd service
-        logger.logBoxLine('Refreshing systemd service...');
-
-        // First check if service exists
-        let serviceExists = false;
-        try {
-          const output = execSync('systemctl list-unit-files | grep nupst.service').toString();
-          serviceExists = output.includes('nupst.service');
-        } catch (error) {
-          // If grep fails (service not found), serviceExists remains false
-          serviceExists = false;
-        }
-
-        if (serviceExists) {
-          // Stop the service if it's running
-          const isRunning =
-            execSync('systemctl is-active nupst.service || true').toString().trim() === 'active';
-          if (isRunning) {
-            logger.logBoxLine('Stopping nupst service...');
-            execSync('systemctl stop nupst.service');
-          }
-
-          // Reinstall the service
-          logger.logBoxLine('Reinstalling systemd service...');
-          await this.nupst.getSystemd().install();
-
-          // Restart the service if it was running
-          if (isRunning) {
-            logger.logBoxLine('Restarting nupst service...');
-            execSync('systemctl start nupst.service');
-          }
-        } else {
-          logger.logBoxLine('Systemd service not installed, skipping service refresh.');
-          logger.logBoxLine('Run "nupst enable" to install the service.');
-        }
-
-        logger.logBoxLine('Update completed successfully!');
-        logger.logBoxEnd();
+        console.log('');
+        logger.success(`Updated to ${latestVersion}`);
+        console.log('');
       } catch (error) {
-        logger.logBoxLine('Error during update process:');
-        logger.logBoxLine(`${error instanceof Error ? error.message : String(error)}`);
-        logger.logBoxEnd();
+        console.log('');
+        logger.error('Update failed');
+        logger.dim(`${error instanceof Error ? error.message : String(error)}`);
+        console.log('');
         process.exit(1);
       }
     } catch (error) {
@@ -237,9 +213,11 @@ export class ServiceHandler {
         });
       };
 
-      console.log('\nNUPST Uninstaller');
-      console.log('===============');
-      console.log('This will completely remove NUPST from your system.\n');
+      logger.log('');
+      logger.highlight('NUPST Uninstaller');
+      logger.dim('===============');
+      logger.log('This will completely remove NUPST from your system.');
+      logger.log('');
 
       // Ask about removing configuration
       const removeConfig = await prompt(
@@ -275,17 +253,20 @@ export class ServiceHandler {
         }
 
         if (!uninstallScriptPath) {
-          console.error('Could not locate uninstall.sh script. Aborting uninstall.');
+          logger.error('Could not locate uninstall.sh script. Aborting uninstall.');
           rl.close();
+          process.stdin.destroy();
           process.exit(1);
         }
       }
 
       // Close readline before executing script
       rl.close();
+      process.stdin.destroy();
 
       // Execute uninstall.sh with the appropriate option
-      console.log(`\nRunning uninstaller from ${uninstallScriptPath}...`);
+      logger.log('');
+      logger.log(`Running uninstaller from ${uninstallScriptPath}...`);
 
       // Pass the configuration removal option as an environment variable
       const env = {
@@ -301,7 +282,7 @@ export class ServiceHandler {
         stdio: 'inherit', // Show output in the terminal
       });
     } catch (error) {
-      console.error(`Uninstall failed: ${error instanceof Error ? error.message : String(error)}`);
+      logger.error(`Uninstall failed: ${error instanceof Error ? error.message : String(error)}`);
       process.exit(1);
     }
   }

ts/cli/ups-handler.ts

@@ -47,6 +47,7 @@ export class UpsHandler {
         await this.runAddProcess(prompt);
       } finally {
         rl.close();
+        process.stdin.destroy();
       }
     } catch (error) {
       logger.error(`Add UPS error: ${error instanceof Error ? error.message : String(error)}`);
@@ -178,6 +179,7 @@ export class UpsHandler {
         await this.runEditProcess(upsId, prompt);
       } finally {
         rl.close();
+        process.stdin.destroy();
       }
     } catch (error) {
       logger.error(`Edit UPS error: ${error instanceof Error ? error.message : String(error)}`);
@@ -344,6 +346,7 @@ export class UpsHandler {
       });
 
       rl.close();
+      process.stdin.destroy();
 
       if (confirm !== 'y' && confirm !== 'yes') {
         logger.log('Deletion cancelled.');
@@ -667,10 +670,11 @@ export class UpsHandler {
 
     // SNMP Version
     const defaultVersion = snmpConfig.version || 1;
-    console.log('\nSNMP Version:');
-    console.log('  1) SNMPv1');
-    console.log('  2) SNMPv2c');
-    console.log('  3) SNMPv3 (with security features)');
+    logger.log('');
+    logger.info('SNMP Version:');
+    logger.dim('  1) SNMPv1');
+    logger.dim('  2) SNMPv2c');
+    logger.dim('  3) SNMPv3 (with security features)');
     const versionInput = await prompt(`Select SNMP version [${defaultVersion}]: `);
     const version = parseInt(versionInput, 10);
     snmpConfig.version = versionInput.trim() && (version === 1 || version === 2 || version === 3)
@@ -697,13 +701,15 @@ export class UpsHandler {
     snmpConfig: any,
     prompt: (question: string) => Promise<string>,
   ): Promise<void> {
-    console.log('\nSNMPv3 Security Settings:');
+    logger.log('');
+    logger.info('SNMPv3 Security Settings:');
 
     // Security Level
-    console.log('\nSecurity Level:');
-    console.log('  1) noAuthNoPriv (No Authentication, No Privacy)');
-    console.log('  2) authNoPriv (Authentication, No Privacy)');
-    console.log('  3) authPriv (Authentication and Privacy)');
+    logger.log('');
+    logger.info('Security Level:');
+    logger.dim('  1) noAuthNoPriv (No Authentication, No Privacy)');
+    logger.dim('  2) authNoPriv (Authentication, No Privacy)');
+    logger.dim('  3) authPriv (Authentication and Privacy)');
     const defaultSecLevel = snmpConfig.securityLevel
       ? snmpConfig.securityLevel === 'noAuthNoPriv'
         ? 1
@@ -752,8 +758,9 @@ export class UpsHandler {
 
       // Allow customizing the timeout value
       const defaultTimeout = snmpConfig.timeout / 1000; // Convert from ms to seconds for display
-      console.log(
-        '\nSNMPv3 operations with authentication and privacy may require longer timeouts.',
+      logger.log('');
+      logger.info(
+        'SNMPv3 operations with authentication and privacy may require longer timeouts.',
       );
       const timeoutInput = await prompt(`SNMP Timeout in seconds [${defaultTimeout}]: `);
       const timeout = parseInt(timeoutInput, 10);
@@ -773,9 +780,10 @@ export class UpsHandler {
     prompt: (question: string) => Promise<string>,
   ): Promise<void> {
     // Authentication protocol
-    console.log('\nAuthentication Protocol:');
-    console.log('  1) MD5');
-    console.log('  2) SHA');
+    logger.log('');
+    logger.info('Authentication Protocol:');
+    logger.dim('  1) MD5');
+    logger.dim('  2) SHA');
     const defaultAuthProtocol = snmpConfig.authProtocol === 'SHA' ? 2 : 1;
     const authProtocolInput = await prompt(
       `Select Authentication Protocol [${defaultAuthProtocol}]: `,
@@ -799,9 +807,10 @@ export class UpsHandler {
     prompt: (question: string) => Promise<string>,
   ): Promise<void> {
     // Privacy protocol
-    console.log('\nPrivacy Protocol:');
-    console.log('  1) DES');
-    console.log('  2) AES');
+    logger.log('');
+    logger.info('Privacy Protocol:');
+    logger.dim('  1) DES');
+    logger.dim('  2) AES');
     const defaultPrivProtocol = snmpConfig.privProtocol === 'AES' ? 2 : 1;
     const privProtocolInput = await prompt(`Select Privacy Protocol [${defaultPrivProtocol}]: `);
     const privProtocol = parseInt(privProtocolInput, 10) || defaultPrivProtocol;
@@ -822,7 +831,8 @@ export class UpsHandler {
     thresholds: any,
     prompt: (question: string) => Promise<string>,
   ): Promise<void> {
-    console.log('\nShutdown Thresholds:');
+    logger.log('');
+    logger.info('Shutdown Thresholds:');
 
     // Battery threshold
     const defaultBatteryThreshold = thresholds.battery || 60;
@@ -854,13 +864,14 @@ export class UpsHandler {
     snmpConfig: any,
     prompt: (question: string) => Promise<string>,
   ): Promise<void> {
-    console.log('\nUPS Model Selection:');
-    console.log('  1) CyberPower');
-    console.log('  2) APC');
-    console.log('  3) Eaton');
-    console.log('  4) TrippLite');
-    console.log('  5) Liebert/Vertiv');
-    console.log('  6) Custom (Advanced)');
+    logger.log('');
+    logger.info('UPS Model Selection:');
+    logger.dim('  1) CyberPower');
+    logger.dim('  2) APC');
+    logger.dim('  3) Eaton');
+    logger.dim('  4) TrippLite');
+    logger.dim('  5) Liebert/Vertiv');
+    logger.dim('  6) Custom (Advanced)');
 
     const defaultModelValue = snmpConfig.upsModel === 'cyberpower'
       ? 1
@@ -891,8 +902,9 @@ export class UpsHandler {
       snmpConfig.upsModel = 'liebert';
     } else if (modelValue === 6) {
       snmpConfig.upsModel = 'custom';
-      console.log('\nEnter custom OIDs for your UPS:');
-      console.log('(Leave blank to use standard RFC 1628 OIDs as fallback)');
+      logger.log('');
+      logger.info('Enter custom OIDs for your UPS:');
+      logger.dim('(Leave blank to use standard RFC 1628 OIDs as fallback)');
 
       // Custom OIDs
       const powerStatusOID = await prompt('Power Status OID: ');

ts/daemon.ts

@@ -207,11 +207,9 @@ export class NupstDaemon {
       fs.writeFileSync(this.CONFIG_PATH, JSON.stringify(configToSave, null, 2));
       this.config = configToSave;
 
-      console.log('┌─ Configuration Saved ─────────────────────┐');
-      console.log(`│ Location: ${this.CONFIG_PATH}`);
-      console.log('└──────────────────────────────────────────┘');
+      logger.logBox('Configuration Saved', [`Location: ${this.CONFIG_PATH}`], 45, 'success');
     } catch (error) {
-      console.error('Error saving configuration:', error);
+      logger.error(`Error saving configuration: ${error}`);
     }
   }
 
@@ -219,10 +217,7 @@ export class NupstDaemon {
    * Helper method to log configuration errors consistently
    */
   private logConfigError(message: string): void {
-    console.error('┌─ Configuration Error ─────────────────────┐');
-    console.error(`│ ${message}`);
-    console.error("│ Please run 'nupst setup' first to create a configuration.");
-    console.error('└───────────────────────────────────────────┘');
+    logger.logBox('Configuration Error', [message, "Please run 'nupst setup' first to create a configuration."], 45, 'error');
   }
 
   /**

ts/migrations/migration-runner.ts

@@ -34,12 +34,14 @@ export class MigrationRunner {
     let currentConfig = config;
     let anyMigrationsRan = false;
 
-    logger.dim('Checking for required config migrations...');
-
     for (const migration of this.migrations) {
       const shouldRun = await migration.shouldRun(currentConfig);
 
       if (shouldRun) {
+        // Only show "checking" message when we actually need to migrate
+        if (!anyMigrationsRan) {
+          logger.dim('Checking for required config migrations...');
+        }
         logger.info(`Running ${migration.getName()}...`);
         currentConfig = await migration.migrate(currentConfig);
         anyMigrationsRan = true;
@@ -49,7 +51,7 @@ export class MigrationRunner {
     if (anyMigrationsRan) {
       logger.success('Configuration migrations complete');
     } else {
-      logger.dim('No migrations needed');
+      logger.success('config format ok');
     }
 
     return {

ts/snmp/manager.ts

@@ -525,6 +525,7 @@ export class NupstSnmp {
 
   /**
    * Determine power status based on UPS model and raw value
+   * Uses the value mappings defined in the OID sets
    * @param upsModel UPS model
    * @param powerStatusValue Raw power status value
    * @returns Standardized power status
@@ -533,39 +534,28 @@ export class NupstSnmp {
     upsModel: TUpsModel | undefined,
     powerStatusValue: number,
   ): 'online' | 'onBattery' | 'unknown' {
-    if (upsModel === 'cyberpower') {
-      // CyberPower RMCARD205: upsBaseOutputStatus values
-      // 2=onLine, 3=onBattery, 4=onBoost, 5=onSleep, 6=off, etc.
-      if (powerStatusValue === 2) {
-        return 'online';
-      } else if (powerStatusValue === 3) {
-        return 'onBattery';
-      }
-    } else if (upsModel === 'eaton') {
-      // Eaton UPS: xupsOutputSource values
-      // 3=normal/mains, 5=battery, etc.
-      if (powerStatusValue === 3) {
-        return 'online';
-      } else if (powerStatusValue === 5) {
-        return 'onBattery';
-      }
-    } else if (upsModel === 'apc') {
-      // APC UPS: upsBasicOutputStatus values
-      // 2=online, 3=onBattery, etc.
-      if (powerStatusValue === 2) {
-        return 'online';
-      } else if (powerStatusValue === 3) {
-        return 'onBattery';
-      }
-    } else {
-      // Default interpretation for other UPS models
-      if (powerStatusValue === 1) {
-        return 'online';
-      } else if (powerStatusValue === 2) {
-        return 'onBattery';
+    // Get the OID set for this UPS model
+    if (upsModel && upsModel !== 'custom') {
+      const oidSet = UpsOidSets.getOidSet(upsModel);
+
+      // Use the value mappings if available
+      if (oidSet.POWER_STATUS_VALUES) {
+        if (powerStatusValue === oidSet.POWER_STATUS_VALUES.online) {
+          return 'online';
+        } else if (powerStatusValue === oidSet.POWER_STATUS_VALUES.onBattery) {
+          return 'onBattery';
+        }
       }
     }
 
+    // Fallback for custom or undefined models (RFC 1628 standard)
+    // upsOutputSource: 3=normal (mains), 5=battery
+    if (powerStatusValue === 3) {
+      return 'online';
+    } else if (powerStatusValue === 5) {
+      return 'onBattery';
+    }
+
     return 'unknown';
   }
 

ts/snmp/oid-sets.ts

@@ -11,37 +11,57 @@ export class UpsOidSets {
   private static readonly UPS_OID_SETS: Record<TUpsModel, IOidSet> = {
     // Cyberpower OIDs for RMCARD205 (based on CyberPower_MIB_v2.11)
     cyberpower: {
-      POWER_STATUS: '1.3.6.1.4.1.3808.1.1.1.4.1.1.0', // upsBaseOutputStatus (2=online, 3=on battery)
+      POWER_STATUS: '1.3.6.1.4.1.3808.1.1.1.4.1.1.0', // upsBaseOutputStatus
       BATTERY_CAPACITY: '1.3.6.1.4.1.3808.1.1.1.2.2.1.0', // upsAdvanceBatteryCapacity (percentage)
       BATTERY_RUNTIME: '1.3.6.1.4.1.3808.1.1.1.2.2.4.0', // upsAdvanceBatteryRunTimeRemaining (TimeTicks)
+      POWER_STATUS_VALUES: {
+        online: 2, // upsBaseOutputStatus: 2=onLine
+        onBattery: 3, // upsBaseOutputStatus: 3=onBattery
+      },
     },
 
     // APC OIDs
     apc: {
-      POWER_STATUS: '1.3.6.1.4.1.318.1.1.1.4.1.1.0', // Power status (1=online, 2=on battery)
+      POWER_STATUS: '1.3.6.1.4.1.318.1.1.1.4.1.1.0', // upsBasicOutputStatus
       BATTERY_CAPACITY: '1.3.6.1.4.1.318.1.1.1.2.2.1.0', // Battery capacity in percentage
       BATTERY_RUNTIME: '1.3.6.1.4.1.318.1.1.1.2.2.3.0', // Remaining runtime in minutes
+      POWER_STATUS_VALUES: {
+        online: 2, // upsBasicOutputStatus: 2=onLine
+        onBattery: 3, // upsBasicOutputStatus: 3=onBattery
+      },
     },
 
     // Eaton OIDs
     eaton: {
-      POWER_STATUS: '1.3.6.1.4.1.534.1.4.4.0', // xupsOutputSource (3=normal/mains, 5=battery)
+      POWER_STATUS: '1.3.6.1.4.1.534.1.4.4.0', // xupsOutputSource
       BATTERY_CAPACITY: '1.3.6.1.4.1.534.1.2.4.0', // xupsBatCapacity (percentage)
       BATTERY_RUNTIME: '1.3.6.1.4.1.534.1.2.1.0', // xupsBatTimeRemaining (seconds)
+      POWER_STATUS_VALUES: {
+        online: 3, // xupsOutputSource: 3=normal (mains power)
+        onBattery: 5, // xupsOutputSource: 5=battery
+      },
     },
 
     // TrippLite OIDs
     tripplite: {
-      POWER_STATUS: '1.3.6.1.4.1.850.1.1.3.1.1.1.0', // Power status
+      POWER_STATUS: '1.3.6.1.4.1.850.1.1.3.1.1.1.0', // tlUpsOutputSource
       BATTERY_CAPACITY: '1.3.6.1.4.1.850.1.1.3.2.4.1.0', // Battery capacity in percentage
       BATTERY_RUNTIME: '1.3.6.1.4.1.850.1.1.3.2.2.1.0', // Remaining runtime in minutes
+      POWER_STATUS_VALUES: {
+        online: 2, // tlUpsOutputSource: 2=normal (mains power)
+        onBattery: 3, // tlUpsOutputSource: 3=onBattery
+      },
     },
 
     // Liebert/Vertiv OIDs
     liebert: {
-      POWER_STATUS: '1.3.6.1.4.1.476.1.42.3.9.20.1.20.1.2.1.2.1', // Power status
+      POWER_STATUS: '1.3.6.1.4.1.476.1.42.3.9.20.1.20.1.2.1.2.1', // lgpPwrOutputSource
       BATTERY_CAPACITY: '1.3.6.1.4.1.476.1.42.3.9.20.1.20.1.2.1.4.1', // Battery capacity in percentage
       BATTERY_RUNTIME: '1.3.6.1.4.1.476.1.42.3.9.20.1.20.1.2.1.5.1', // Remaining runtime in minutes
+      POWER_STATUS_VALUES: {
+        online: 2, // lgpPwrOutputSource: 2=normal (mains power)
+        onBattery: 3, // lgpPwrOutputSource: 3=onBattery
+      },
     },
 
     // Custom OIDs (to be provided by the user)

ts/snmp/types.ts

@@ -28,6 +28,13 @@ export interface IOidSet {
   BATTERY_CAPACITY: string;
   /** OID for battery runtime */
   BATTERY_RUNTIME: string;
+  /** Power status value mappings */
+  POWER_STATUS_VALUES?: {
+    /** SNMP value that indicates UPS is online (on AC power) */
+    online: number;
+    /** SNMP value that indicates UPS is on battery */
+    onBattery: number;
+  };
 }
 
 /**

ts/systemd.ts

@@ -3,6 +3,7 @@ import { promises as fs } from 'node:fs';
 import { execSync } from 'node:child_process';
 import { NupstDaemon } from './daemon.ts';
 import { logger } from './logger.ts';
+import { theme, symbols, getBatteryColor, getRuntimeColor, formatPowerStatus } from './colors.ts';
 
 /**
  * Class for managing systemd service
@@ -49,11 +50,11 @@ WantedBy=multi-user.target
     try {
       await fs.access(configPath);
     } catch (error) {
-      const boxWidth = 50;
-      logger.logBoxTitle('Configuration Error', boxWidth);
-      logger.logBoxLine(`No configuration file found at ${configPath}`);
-      logger.logBoxLine("Please run 'nupst add' first to create a UPS configuration.");
-      logger.logBoxEnd();
+      logger.log('');
+      logger.error('No configuration found');
+      logger.log(`  ${theme.dim('Config file:')} ${configPath}`);
+      logger.log(`  ${theme.dim('Run')} ${theme.command('nupst ups add')} ${theme.dim('to create a configuration')}`);
+      logger.log('');
       throw new Error('Configuration not found');
     }
   }
@@ -133,21 +134,59 @@ WantedBy=multi-user.target
    * Get status of the systemd service and UPS
    * @param debugMode Whether to enable debug mode for SNMP
    */
+  /**
+   * Display version information and update status
+   * @private
+   */
+  private async displayVersionInfo(): Promise<void> {
+    try {
+      const nupst = this.daemon.getNupstSnmp().getNupst();
+      const version = nupst.getVersion();
+      
+      // Check for updates
+      const updateAvailable = await nupst.checkForUpdates();
+      
+      // Display version info
+      if (updateAvailable) {
+        const updateStatus = nupst.getUpdateStatus();
+        logger.log('');
+        logger.log(
+          `${theme.dim('NUPST')} ${theme.dim('v' + version)}  ${symbols.warning} ${theme.statusWarning(`Update available: v${updateStatus.latestVersion}`)}`,
+        );
+        logger.log(`  ${theme.dim('Run')} ${theme.command('sudo nupst update')} ${theme.dim('to upgrade')}`);
+      } else {
+        logger.log('');
+        logger.log(
+          `${theme.dim('NUPST')} ${theme.dim('v' + version)}  ${symbols.success} ${theme.success('Up to date')}`,
+        );
+      }
+    } catch (error) {
+      // If version check fails, show at least the current version
+      try {
+        const nupst = this.daemon.getNupstSnmp().getNupst();
+        const version = nupst.getVersion();
+        logger.log('');
+        logger.log(`${theme.dim('NUPST')} ${theme.dim('v' + version)}`);
+      } catch (_innerError) {
+        // Silently fail if we can't even get the version
+      }
+    }
+  }
+
   public async getStatus(debugMode: boolean = false): Promise<void> {
     try {
       // Enable debug mode if requested
       if (debugMode) {
-        const boxWidth = 45;
-        logger.logBoxTitle('Debug Mode', boxWidth);
-        logger.logBoxLine('SNMP debugging enabled - detailed logs will be shown');
-        logger.logBoxEnd();
+        console.log('');
+        logger.info('Debug Mode: SNMP debugging enabled');
+        console.log('');
         this.daemon.getNupstSnmp().enableDebug();
       }
 
-      // Display version information
-      this.daemon.getNupstSnmp().getNupst().logVersionInfo();
+      // Display version and update status first
+      await this.displayVersionInfo();
 
-      // Check if config exists first
+      // Check if config exists
       try {
         await this.checkConfigExists();
       } catch (error) {
@@ -171,18 +210,50 @@ WantedBy=multi-user.target
   private displayServiceStatus(): void {
     try {
       const serviceStatus = execSync('systemctl status nupst.service').toString();
-      const boxWidth = 45;
-      logger.logBoxTitle('Service Status', boxWidth);
-      // Process each line of the status output
-      serviceStatus.split('\n').forEach((line) => {
-        logger.logBoxLine(line);
-      });
-      logger.logBoxEnd();
+      const lines = serviceStatus.split('\n');
+
+      // Parse key information from systemctl output
+      let isActive = false;
+      let pid = '';
+      let memory = '';
+      let cpu = '';
+
+      for (const line of lines) {
+        if (line.includes('Active:')) {
+          isActive = line.includes('active (running)');
+        } else if (line.includes('Main PID:')) {
+          const match = line.match(/Main PID:\s+(\d+)/);
+          if (match) pid = match[1];
+        } else if (line.includes('Memory:')) {
+          const match = line.match(/Memory:\s+([\d.]+[A-Z])/);
+          if (match) memory = match[1];
+        } else if (line.includes('CPU:')) {
+          const match = line.match(/CPU:\s+([\d.]+(?:ms|s))/);
+          if (match) cpu = match[1];
+        }
+      }
+
+      // Display beautiful status
+      logger.log('');
+      if (isActive) {
+        logger.log(`${symbols.running} ${theme.success('Service:')} ${theme.statusActive('active (running)')}`);
+      } else {
+        logger.log(`${symbols.stopped} ${theme.dim('Service:')} ${theme.statusInactive('inactive')}`);
+      }
+
+      if (pid || memory || cpu) {
+        const details = [];
+        if (pid) details.push(`PID: ${theme.dim(pid)}`);
+        if (memory) details.push(`Memory: ${theme.dim(memory)}`);
+        if (cpu) details.push(`CPU: ${theme.dim(cpu)}`);
+        logger.log(`  ${details.join('  ')}`);
+      }
+      logger.log('');
+
     } catch (error) {
-      const boxWidth = 45;
-      logger.logBoxTitle('Service Status', boxWidth);
-      logger.logBoxLine('Service is not running');
-      logger.logBoxEnd();
+      logger.log('');
+      logger.log(`${symbols.stopped} ${theme.dim('Service:')} ${theme.statusInactive('not installed')}`);
+      logger.log('');
     }
   }
 
@@ -199,7 +270,7 @@ WantedBy=multi-user.target
 
       // Check if we have the new multi-UPS config format
       if (config.upsDevices && Array.isArray(config.upsDevices) && config.upsDevices.length > 0) {
-        logger.log(`Found ${config.upsDevices.length} UPS device(s) in configuration`);
+        logger.info(`UPS Devices (${config.upsDevices.length}):`);
 
         // Show status for each UPS
         for (const ups of config.upsDevices) {
@@ -207,6 +278,7 @@ WantedBy=multi-user.target
         }
       } else if (config.snmp) {
         // Legacy single UPS configuration
+        logger.info('UPS Devices (1):');
         const legacyUps = {
           id: 'default',
           name: 'Default UPS',
@@ -217,15 +289,16 @@ WantedBy=multi-user.target
 
         await this.displaySingleUpsStatus(legacyUps, snmp);
       } else {
-        logger.error('No UPS devices found in configuration');
+        logger.log('');
+        logger.warn('No UPS devices configured');
+        logger.log(`  ${theme.dim('Run')} ${theme.command('nupst ups add')} ${theme.dim('to add a device')}`);
+        logger.log('');
       }
     } catch (error) {
-      const boxWidth = 45;
-      logger.logBoxTitle('UPS Status', boxWidth);
-      logger.logBoxLine(
-        `Failed to retrieve UPS status: ${error instanceof Error ? error.message : String(error)}`,
-      );
-      logger.logBoxEnd();
+      logger.log('');
+      logger.error('Failed to retrieve UPS status');
+      logger.log(`  ${theme.dim(error instanceof Error ? error.message : String(error))}`);
+      logger.log('');
     }
   }
 
@@ -235,24 +308,6 @@ WantedBy=multi-user.target
    * @param snmp SNMP manager
    */
   private async displaySingleUpsStatus(ups: any, snmp: any): Promise<void> {
-    const boxWidth = 45;
-    logger.logBoxTitle(`Connecting to UPS: ${ups.name}`, boxWidth);
-    logger.logBoxLine(`ID: ${ups.id}`);
-    logger.logBoxLine(`Host: ${ups.snmp.host}:${ups.snmp.port}`);
-    logger.logBoxLine(`UPS Model: ${ups.snmp.upsModel || 'cyberpower'}`);
-
-    if (ups.groups && ups.groups.length > 0) {
-      // Get group names if available
-      const config = this.daemon.getConfig();
-      const groupNames = ups.groups.map((groupId: string) => {
-        const group = config.groups?.find((g: { id: string }) => g.id === groupId);
-        return group ? group.name : groupId;
-      });
-      logger.logBoxLine(`Groups: ${groupNames.join(', ')}`);
-    }
-
-    logger.logBoxEnd();
-
     try {
       // Create a test config with a short timeout
       const testConfig = {
@@ -262,32 +317,43 @@ WantedBy=multi-user.target
 
       const status = await snmp.getUpsStatus(testConfig);
 
-      logger.logBoxTitle(`UPS Status: ${ups.name}`, boxWidth);
-      logger.logBoxLine(`Power Status: ${status.powerStatus}`);
-      logger.logBoxLine(`Battery Capacity: ${status.batteryCapacity}%`);
-      logger.logBoxLine(`Runtime Remaining: ${status.batteryRuntime} minutes`);
+      // Determine status symbol based on power status
+      let statusSymbol = symbols.unknown;
+      if (status.powerStatus === 'online') {
+        statusSymbol = symbols.running;
+      } else if (status.powerStatus === 'onBattery') {
+        statusSymbol = symbols.warning;
+      }
 
-      // Show threshold status
-      logger.logBoxLine('');
-      logger.logBoxLine('Thresholds:');
-      logger.logBoxLine(
-        `  Battery: ${status.batteryCapacity}% / ${ups.thresholds.battery}% ${
-          status.batteryCapacity < ups.thresholds.battery ? '⚠️' : '✓'
-        }`,
-      );
-      logger.logBoxLine(
-        `  Runtime: ${status.batteryRuntime} min / ${ups.thresholds.runtime} min ${
-          status.batteryRuntime < ups.thresholds.runtime ? '⚠️' : '✓'
-        }`,
-      );
+      // Display UPS name and power status
+      logger.log(`  ${statusSymbol} ${theme.highlight(ups.name)} - ${formatPowerStatus(status.powerStatus)}`);
+
+      // Display battery with color coding
+      const batteryColor = getBatteryColor(status.batteryCapacity);
+      const batterySymbol = status.batteryCapacity >= ups.thresholds.battery ? symbols.success : symbols.warning;
+      logger.log(`    Battery: ${batteryColor(status.batteryCapacity + '%')} ${batterySymbol}  Runtime: ${getRuntimeColor(status.batteryRuntime)(status.batteryRuntime + ' min')}`);
+
+      // Display host info
+      logger.log(`    ${theme.dim(`Host: ${ups.snmp.host}:${ups.snmp.port}`)}`);
+
+      // Display groups if any
+      if (ups.groups && ups.groups.length > 0) {
+        const config = this.daemon.getConfig();
+        const groupNames = ups.groups.map((groupId: string) => {
+          const group = config.groups?.find((g: { id: string }) => g.id === groupId);
+          return group ? group.name : groupId;
+        });
+        logger.log(`    ${theme.dim(`Groups: ${groupNames.join(', ')}`)}`);
+      }
+
+      logger.log('');
 
-      logger.logBoxEnd();
     } catch (error) {
-      logger.logBoxTitle(`UPS Status: ${ups.name}`, boxWidth);
-      logger.logBoxLine(
-        `Failed to retrieve UPS status: ${error instanceof Error ? error.message : String(error)}`,
-      );
-      logger.logBoxEnd();
+      // Display error for this UPS
+      logger.log(`  ${symbols.error} ${theme.highlight(ups.name)} - ${theme.error('Connection failed')}`);
+      logger.log(`    ${theme.dim(error instanceof Error ? error.message : String(error))}`);
+      logger.log(`    ${theme.dim(`Host: ${ups.snmp.host}:${ups.snmp.port}`)}`);
+      logger.log('');
     }
   }