feat(server): add bridge forwarding mode and per-client destination policy overrides

changelog.md

@@ -1,5 +1,14 @@
 # Changelog
 
+## 2026-03-31 - 1.18.0 - feat(server)
+add bridge forwarding mode and per-client destination policy overrides
+
+- introduces Linux bridge-based forwarding so VPN clients can receive IPs from a LAN subnet via TAP/bridge integration
+- adds bridge server configuration options for LAN subnet, physical interface, and client IP allocation range
+- adds per-client destinationPolicy overrides in the client registry and applies them in the userspace NAT engine based on assigned tunnel IP
+- extends IP pool allocation to support constrained address ranges needed for bridge mode
+- updates TypeScript interfaces and documentation to cover bridge mode and per-client destination policy behavior
+
 ## 2026-03-31 - 1.17.1 - fix(readme)
 document per-transport metrics and handshake-driven WireGuard connection state
 

readme.md

@@ -9,7 +9,8 @@ A high-performance VPN solution with a **TypeScript control plane** and a **Rust
 📊 **Per-transport metrics**: active clients and total connections broken down by websocket, QUIC, and WireGuard
 🔄 **Hub API**: one `createClient()` call generates keys, assigns IP, returns both SmartVPN + WireGuard configs
 📡 **Real-time telemetry**: RTT, jitter, loss ratio, link health — all via typed APIs
-🌐 **Unified forwarding pipeline**: all transports share the same engine — TUN (kernel), userspace NAT (no root), or testing mode
+🌐 **Unified forwarding pipeline**: all transports share the same engine — TUN (kernel), userspace NAT (no root), L2 bridge, or testing mode
+🏠 **Bridge mode**: VPN clients get IPs from your LAN subnet — seamlessly bridge remote clients onto a physical network
 🎯 **Destination routing policy**: force-target, block, or allow traffic per destination with nftables integration
 ⚡ **Handshake-driven WireGuard state**: peers appear as "connected" only after a successful WireGuard handshake, and auto-disconnect on idle timeout
 
@@ -84,7 +85,7 @@ await server.start({
   publicKey: '<server-noise-public-key-base64>',
   subnet: '10.8.0.0/24',
   transportMode: 'all',       // WebSocket + QUIC + WireGuard simultaneously (default)
-  forwardingMode: 'tun',      // 'tun' (kernel), 'socket' (userspace NAT), or 'testing'
+  forwardingMode: 'tun',      // 'tun' | 'socket' | 'bridge' | 'testing'
   wgPrivateKey: '<server-wg-private-key-base64>', // required for WireGuard transport
   enableNat: true,
   dns: ['1.1.1.1', '8.8.8.8'],
@@ -237,6 +238,21 @@ In **TUN mode**, destination policies are enforced via **nftables** rules (using
 
 In **socket mode**, the policy is evaluated in the userspace NAT engine before per-client ACLs.
 
+**Per-client override** — individual clients can have their own destination policy that overrides the server-level default:
+
+```typescript
+await server.createClient({
+  clientId: 'restricted-client',
+  security: {
+    destinationPolicy: {
+      default: 'block',                         // block everything by default
+      allowList: ['10.0.0.0/8'],                 // except internal network
+    },
+    // ... other security settings
+  },
+});
+```
+
 ### 🔗 Socket Forward Proxy Protocol
 
 When using `forwardingMode: 'socket'` (userspace NAT), you can prepend **PROXY protocol v2 headers** on outbound TCP connections. This conveys the VPN client's tunnel IP as the source address to downstream services (e.g., SmartProxy):
@@ -251,12 +267,13 @@ await server.start({
 
 ### 📦 Packet Forwarding Modes
 
-SmartVPN supports three forwarding modes, configurable per-server and per-client:
+SmartVPN supports four forwarding modes, configurable per-server and per-client:
 
 | Mode | Flag | Description | Root Required |
 |------|------|-------------|---------------|
 | **TUN** | `'tun'` | Kernel TUN device — real packet forwarding with system routing | ✅ Yes |
 | **Userspace NAT** | `'socket'` | Userspace TCP/UDP proxy via `connect(2)` — no TUN, no root needed | ❌ No |
+| **Bridge** | `'bridge'` | L2 bridge — VPN clients get IPs from a physical LAN subnet | ✅ Yes |
 | **Testing** | `'testing'` | Monitoring only — packets are counted but not forwarded | ❌ No |
 
 ```typescript
@@ -267,6 +284,16 @@ await server.start({
   enableNat: true,
 });
 
+// Server with bridge mode — VPN clients appear on the LAN
+await server.start({
+  // ...
+  forwardingMode: 'bridge',
+  bridgeLanSubnet: '192.168.1.0/24',      // LAN subnet to bridge into
+  bridgePhysicalInterface: 'eth0',         // auto-detected if omitted
+  bridgeIpRangeStart: 200,                 // clients get .200–.250 (defaults)
+  bridgeIpRangeEnd: 250,
+});
+
 // Client with TUN device
 const { assignedIp } = await client.connect({
   // ...
@@ -274,7 +301,9 @@ const { assignedIp } = await client.connect({
 });
 ```
 
-The userspace NAT mode extracts destination IP/port from IP packets, opens a real socket to the destination, and relays data — supporting both TCP streams and UDP datagrams without requiring `CAP_NET_ADMIN` or root privileges.
+The **userspace NAT** mode extracts destination IP/port from IP packets, opens a real socket to the destination, and relays data — supporting both TCP streams and UDP datagrams without requiring `CAP_NET_ADMIN` or root privileges.
+
+The **bridge** mode assigns VPN clients IPs from a real LAN subnet instead of a virtual VPN subnet. Clients appear as if they're directly on the physical network — perfect for remote access to home labs, office networks, or IoT devices.
 
 ### 📊 Telemetry & QoS
 
@@ -444,10 +473,10 @@ server.on('reconnected', () => { /* socket transport reconnected */ });
 
 | Interface | Purpose |
 |-----------|---------|
-| `IVpnServerConfig` | Server configuration (listen addr, keys, subnet, transport mode, forwarding mode, clients, proxy protocol, destination policy) |
+| `IVpnServerConfig` | Server configuration (listen addr, keys, subnet, transport mode, forwarding mode incl. bridge, clients, proxy protocol, destination policy) |
 | `IVpnClientConfig` | Client configuration (server URL, keys, transport, forwarding mode, WG options, client-defined tags) |
 | `IClientEntry` | Server-side client definition (ID, keys, security, priority, server/client tags, expiry) |
-| `IClientSecurity` | Per-client ACLs and rate limits (SmartProxy-aligned naming) |
+| `IClientSecurity` | Per-client ACLs, rate limits, and destination policy override (SmartProxy-aligned naming) |
 | `IClientRateLimit` | Rate limiting config (bytesPerSec, burstBytes) |
 | `IClientConfigBundle` | Full config bundle returned by `createClient()` — includes SmartVPN config, WireGuard .conf, and secrets |
 | `IVpnClientInfo` | Connected client info (IP, stats, authenticated key, remote addr, transport type) |

rust/src/acl.rs

@@ -164,6 +164,7 @@ mod tests {
             destination_block_list: dst_block.map(|v| v.into_iter().map(String::from).collect()),
             max_connections: None,
             rate_limit: None,
+            destination_policy: None,
         }
     }
 

rust/src/bridge.rs

@@ -0,0 +1,352 @@
+//! L2 Bridge forwarding engine.
+//!
+//! Provides server-side bridging: receives L3 IP packets from VPN clients,
+//! wraps them in Ethernet frames, and injects them into a Linux bridge
+//! connected to the host's physical network interface.
+//!
+//! Return traffic from the bridge is stripped of its Ethernet header and
+//! routed back to VPN clients via `tun_routes`.
+
+use anyhow::Result;
+use std::collections::HashMap;
+use std::net::Ipv4Addr;
+use std::sync::Arc;
+use tokio::io::{AsyncReadExt, AsyncWriteExt};
+use tokio::sync::mpsc;
+use tracing::{debug, error, info, warn};
+
+use crate::server::ServerState;
+
+/// Configuration for the bridge forwarding engine.
+pub struct BridgeConfig {
+    /// TAP device name (e.g., "svpn_tap0")
+    pub tap_name: String,
+    /// Linux bridge name (e.g., "svpn_br0")
+    pub bridge_name: String,
+    /// Physical interface to bridge (e.g., "eth0")
+    pub physical_interface: String,
+    /// Gateway IP on the bridge (host's LAN IP)
+    pub gateway_ip: Ipv4Addr,
+    /// Subnet prefix length (e.g., 24)
+    pub prefix_len: u8,
+    /// MTU for the TAP device
+    pub mtu: u16,
+}
+
+/// Ethernet frame constants
+const ETH_HEADER_LEN: usize = 14;
+const ETH_TYPE_IPV4: [u8; 2] = [0x08, 0x00];
+const ETH_TYPE_ARP: [u8; 2] = [0x08, 0x06];
+const BROADCAST_MAC: [u8; 6] = [0xff; 6];
+
+/// Generate a deterministic locally-administered MAC from an IPv4 address.
+/// Uses prefix 02:53:56 (locally administered, "SVP" in hex-ish).
+fn mac_from_ip(ip: Ipv4Addr) -> [u8; 6] {
+    let octets = ip.octets();
+    [0x02, 0x53, 0x56, octets[1], octets[2], octets[3]]
+}
+
+/// Wrap an IP packet in an Ethernet frame.
+fn wrap_in_ethernet(ip_packet: &[u8], src_mac: [u8; 6], dst_mac: [u8; 6]) -> Vec<u8> {
+    let mut frame = Vec::with_capacity(ETH_HEADER_LEN + ip_packet.len());
+    frame.extend_from_slice(&dst_mac);
+    frame.extend_from_slice(&src_mac);
+    frame.extend_from_slice(&ETH_TYPE_IPV4);
+    frame.extend_from_slice(ip_packet);
+    frame
+}
+
+/// Extract the EtherType and payload from an Ethernet frame.
+fn unwrap_ethernet(frame: &[u8]) -> Option<([u8; 2], &[u8])> {
+    if frame.len() < ETH_HEADER_LEN {
+        return None;
+    }
+    let ether_type = [frame[12], frame[13]];
+    Some((ether_type, &frame[ETH_HEADER_LEN..]))
+}
+
+/// Extract destination IPv4 from a raw IP packet header.
+fn dst_ip_from_packet(packet: &[u8]) -> Option<Ipv4Addr> {
+    if packet.len() < 20 {
+        return None;
+    }
+    // Version must be 4
+    if (packet[0] >> 4) != 4 {
+        return None;
+    }
+    Some(Ipv4Addr::new(packet[16], packet[17], packet[18], packet[19]))
+}
+
+/// Extract source IPv4 from a raw IP packet header.
+fn src_ip_from_packet(packet: &[u8]) -> Option<Ipv4Addr> {
+    if packet.len() < 20 {
+        return None;
+    }
+    if (packet[0] >> 4) != 4 {
+        return None;
+    }
+    Some(Ipv4Addr::new(packet[12], packet[13], packet[14], packet[15]))
+}
+
+/// Build a gratuitous ARP announcement frame.
+fn build_garp(ip: Ipv4Addr, mac: [u8; 6]) -> Vec<u8> {
+    let ip_bytes = ip.octets();
+    let mut frame = Vec::with_capacity(42); // 14 eth + 28 ARP
+    // Ethernet header
+    frame.extend_from_slice(&BROADCAST_MAC); // dst: broadcast
+    frame.extend_from_slice(&mac);           // src: our MAC
+    frame.extend_from_slice(&ETH_TYPE_ARP);  // EtherType: ARP
+    // ARP payload
+    frame.extend_from_slice(&[0x00, 0x01]); // Hardware type: Ethernet
+    frame.extend_from_slice(&[0x08, 0x00]); // Protocol type: IPv4
+    frame.push(6);                          // Hardware addr len
+    frame.push(4);                          // Protocol addr len
+    frame.extend_from_slice(&[0x00, 0x01]); // Operation: ARP Request (GARP uses request)
+    frame.extend_from_slice(&mac);          // Sender hardware addr
+    frame.extend_from_slice(&ip_bytes);     // Sender protocol addr
+    frame.extend_from_slice(&[0x00; 6]);    // Target hardware addr (ignored in GARP)
+    frame.extend_from_slice(&ip_bytes);     // Target protocol addr (same as sender for GARP)
+    frame
+}
+
+// ============================================================================
+// Linux bridge management (ip commands)
+// ============================================================================
+
+async fn run_ip_cmd(args: &[&str]) -> Result<String> {
+    let output = tokio::process::Command::new("ip")
+        .args(args)
+        .output()
+        .await?;
+    if !output.status.success() {
+        let stderr = String::from_utf8_lossy(&output.stderr);
+        anyhow::bail!("ip {} failed: {}", args.join(" "), stderr.trim());
+    }
+    Ok(String::from_utf8_lossy(&output.stdout).to_string())
+}
+
+/// Create a Linux bridge interface.
+pub async fn create_bridge(name: &str) -> Result<()> {
+    run_ip_cmd(&["link", "add", name, "type", "bridge"]).await?;
+    info!("Created bridge {}", name);
+    Ok(())
+}
+
+/// Add an interface to a bridge.
+pub async fn bridge_add_interface(bridge: &str, iface: &str) -> Result<()> {
+    run_ip_cmd(&["link", "set", iface, "master", bridge]).await?;
+    info!("Added {} to bridge {}", iface, bridge);
+    Ok(())
+}
+
+/// Bring an interface up.
+pub async fn set_interface_up(iface: &str) -> Result<()> {
+    run_ip_cmd(&["link", "set", iface, "up"]).await?;
+    Ok(())
+}
+
+/// Remove a bridge interface.
+pub async fn remove_bridge(name: &str) -> Result<()> {
+    // First bring it down, ignore errors
+    let _ = run_ip_cmd(&["link", "set", name, "down"]).await;
+    run_ip_cmd(&["link", "del", name]).await?;
+    info!("Removed bridge {}", name);
+    Ok(())
+}
+
+/// Detect the default network interface from the routing table.
+pub async fn detect_default_interface() -> Result<String> {
+    let output = run_ip_cmd(&["route", "show", "default"]).await?;
+    // Format: "default via X.X.X.X dev IFACE ..."
+    let parts: Vec<&str> = output.split_whitespace().collect();
+    if let Some(idx) = parts.iter().position(|&s| s == "dev") {
+        if let Some(iface) = parts.get(idx + 1) {
+            return Ok(iface.to_string());
+        }
+    }
+    anyhow::bail!("Could not detect default network interface from route table");
+}
+
+/// Get the IP address and prefix length of a network interface.
+pub async fn get_interface_ip(iface: &str) -> Result<(Ipv4Addr, u8)> {
+    let output = run_ip_cmd(&["-4", "addr", "show", "dev", iface]).await?;
+    // Parse "inet X.X.X.X/NN" from output
+    for line in output.lines() {
+        let trimmed = line.trim();
+        if let Some(rest) = trimmed.strip_prefix("inet ") {
+            let addr_cidr = rest.split_whitespace().next().unwrap_or("");
+            let parts: Vec<&str> = addr_cidr.split('/').collect();
+            if parts.len() == 2 {
+                let ip: Ipv4Addr = parts[0].parse()?;
+                let prefix: u8 = parts[1].parse()?;
+                return Ok((ip, prefix));
+            }
+        }
+    }
+    anyhow::bail!("Could not find IPv4 address on interface {}", iface);
+}
+
+/// Migrate the host's IP from a physical interface to a bridge.
+/// This is the most delicate operation — briefly interrupts connectivity.
+pub async fn migrate_host_ip_to_bridge(
+    physical_iface: &str,
+    bridge: &str,
+    ip: Ipv4Addr,
+    prefix: u8,
+) -> Result<()> {
+    let cidr = format!("{}/{}", ip, prefix);
+    // Remove IP from physical interface
+    let _ = run_ip_cmd(&["addr", "del", &cidr, "dev", physical_iface]).await;
+    // Add IP to bridge
+    run_ip_cmd(&["addr", "add", &cidr, "dev", bridge]).await?;
+    info!("Migrated IP {} from {} to {}", cidr, physical_iface, bridge);
+    Ok(())
+}
+
+/// Restore the host's IP from bridge back to the physical interface.
+pub async fn restore_host_ip(
+    physical_iface: &str,
+    bridge: &str,
+    ip: Ipv4Addr,
+    prefix: u8,
+) -> Result<()> {
+    let cidr = format!("{}/{}", ip, prefix);
+    let _ = run_ip_cmd(&["addr", "del", &cidr, "dev", bridge]).await;
+    run_ip_cmd(&["addr", "add", &cidr, "dev", physical_iface]).await?;
+    info!("Restored IP {} to {}", cidr, physical_iface);
+    Ok(())
+}
+
+/// Enable proxy ARP on an interface via sysctl.
+pub async fn enable_proxy_arp(iface: &str) -> Result<()> {
+    let path = format!("/proc/sys/net/ipv4/conf/{}/proxy_arp", iface);
+    tokio::fs::write(&path, "1").await?;
+    info!("Enabled proxy_arp on {}", iface);
+    Ok(())
+}
+
+/// Create a TAP device (L2) using the tun crate.
+pub fn create_tap(name: &str, mtu: u16) -> Result<tun::AsyncDevice> {
+    let mut config = tun::Configuration::default();
+    config
+        .tun_name(name)
+        .layer(tun::Layer::L2)
+        .mtu(mtu)
+        .up();
+
+    #[cfg(target_os = "linux")]
+    config.platform_config(|p| {
+        p.ensure_root_privileges(true);
+    });
+
+    let device = tun::create_as_async(&config)?;
+    info!("TAP device {} created (L2, mtu={})", name, mtu);
+    Ok(device)
+}
+
+// ============================================================================
+// BridgeEngine — main event loop
+// ============================================================================
+
+/// The BridgeEngine wraps/unwraps Ethernet frames and bridges VPN traffic
+/// to the host's physical LAN via a Linux bridge + TAP device.
+pub struct BridgeEngine {
+    state: Arc<ServerState>,
+    /// Learned MAC addresses for LAN peers (dst IP → MAC).
+    /// Populated from ARP replies and Ethernet frame src MACs.
+    arp_cache: HashMap<Ipv4Addr, [u8; 6]>,
+}
+
+impl BridgeEngine {
+    pub fn new(state: Arc<ServerState>) -> Self {
+        Self {
+            state,
+            arp_cache: HashMap::new(),
+        }
+    }
+
+    /// Run the bridge engine event loop.
+    /// Receives L3 IP packets from VPN clients, wraps in Ethernet, writes to TAP.
+    /// Reads Ethernet frames from TAP, strips header, routes back to VPN clients.
+    pub async fn run(
+        mut self,
+        mut tap_device: tun::AsyncDevice,
+        mut packet_rx: mpsc::Receiver<Vec<u8>>,
+        mut shutdown_rx: mpsc::Receiver<()>,
+    ) -> Result<()> {
+        let mut buf = vec![0u8; 2048];
+
+        info!("BridgeEngine started");
+
+        loop {
+            tokio::select! {
+                // Packet from VPN client → wrap in Ethernet → write to TAP
+                Some(ip_packet) = packet_rx.recv() => {
+                    if let Some(dst_ip) = dst_ip_from_packet(&ip_packet) {
+                        let src_ip = src_ip_from_packet(&ip_packet).unwrap_or(Ipv4Addr::UNSPECIFIED);
+                        let src_mac = mac_from_ip(src_ip);
+                        let dst_mac = self.arp_cache.get(&dst_ip)
+                            .copied()
+                            .unwrap_or(BROADCAST_MAC);
+                        let frame = wrap_in_ethernet(&ip_packet, src_mac, dst_mac);
+                        if let Err(e) = tap_device.write_all(&frame).await {
+                            warn!("TAP write error: {}", e);
+                        }
+                    }
+                }
+
+                // Frame from TAP (LAN) → strip Ethernet → route to VPN client
+                result = tap_device.read(&mut buf) => {
+                    match result {
+                        Ok(len) if len >= ETH_HEADER_LEN => {
+                            let frame = &buf[..len];
+
+                            // Learn src MAC from incoming frames
+                            if let Some((ether_type, payload)) = unwrap_ethernet(frame) {
+                                // Learn ARP cache from src MAC + src IP
+                                let src_mac: [u8; 6] = frame[6..12].try_into().unwrap_or([0; 6]);
+                                if ether_type == ETH_TYPE_IPV4 {
+                                    if let Some(src_ip) = src_ip_from_packet(payload) {
+                                        self.arp_cache.insert(src_ip, src_mac);
+                                    }
+                                }
+
+                                // Only forward IPv4 packets to VPN clients
+                                if ether_type == ETH_TYPE_IPV4 {
+                                    if let Some(dst_ip) = dst_ip_from_packet(payload) {
+                                        // Look up VPN client by dst IP in tun_routes
+                                        let routes = self.state.tun_routes.read().await;
+                                        if let Some(sender) = routes.get(&dst_ip) {
+                                            let _ = sender.try_send(payload.to_vec());
+                                        }
+                                    }
+                                }
+                            }
+                        }
+                        Ok(_) => {} // Frame too short, ignore
+                        Err(e) => {
+                            warn!("TAP read error: {}", e);
+                        }
+                    }
+                }
+
+                _ = shutdown_rx.recv() => {
+                    info!("BridgeEngine shutting down");
+                    break;
+                }
+            }
+        }
+
+        Ok(())
+    }
+
+    /// Send a gratuitous ARP for a VPN client IP.
+    pub async fn announce_client(tap: &mut tun::AsyncDevice, ip: Ipv4Addr) -> Result<()> {
+        let mac = mac_from_ip(ip);
+        let garp = build_garp(ip, mac);
+        tap.write_all(&garp).await?;
+        debug!("Sent GARP for {} (MAC {:02x}:{:02x}:{:02x}:{:02x}:{:02x}:{:02x})",
+            ip, mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
+        Ok(())
+    }
+}

rust/src/client_registry.rs

@@ -26,6 +26,9 @@ pub struct ClientSecurity {
     pub max_connections: Option<u32>,
     /// Per-client rate limiting.
     pub rate_limit: Option<ClientRateLimit>,
+    /// Per-client destination routing policy override.
+    /// When set, overrides the server-level DestinationPolicy for this client's traffic.
+    pub destination_policy: Option<crate::server::DestinationPolicyConfig>,
 }
 
 /// A registered client entry — the server-side source of truth.
@@ -76,12 +79,14 @@ impl ClientEntry {
     }
 }
 
-/// In-memory client registry with dual-key indexing.
+/// In-memory client registry with triple-key indexing.
 pub struct ClientRegistry {
     /// Primary index: clientId → ClientEntry
     entries: HashMap<String, ClientEntry>,
     /// Secondary index: publicKey (base64) → clientId (fast lookup during handshake)
     key_index: HashMap<String, String>,
+    /// Tertiary index: assignedIp → clientId (fast lookup during NAT destination policy)
+    ip_index: HashMap<String, String>,
 }
 
 impl ClientRegistry {
@@ -89,6 +94,7 @@ impl ClientRegistry {
         Self {
             entries: HashMap::new(),
             key_index: HashMap::new(),
+            ip_index: HashMap::new(),
         }
     }
 
@@ -114,6 +120,9 @@ impl ClientRegistry {
             anyhow::bail!("Public key already registered to another client");
         }
         self.key_index.insert(entry.public_key.clone(), entry.client_id.clone());
+        if let Some(ref ip) = entry.assigned_ip {
+            self.ip_index.insert(ip.clone(), entry.client_id.clone());
+        }
         self.entries.insert(entry.client_id.clone(), entry);
         Ok(())
     }
@@ -123,6 +132,9 @@ impl ClientRegistry {
         let entry = self.entries.remove(client_id)
             .ok_or_else(|| anyhow::anyhow!("Client '{}' not found", client_id))?;
         self.key_index.remove(&entry.public_key);
+        if let Some(ref ip) = entry.assigned_ip {
+            self.ip_index.remove(ip);
+        }
         Ok(entry)
     }
 
@@ -137,6 +149,12 @@ impl ClientRegistry {
         self.entries.get(client_id)
     }
 
+    /// Get a client by assigned IP (used for per-client destination policy in NAT engine).
+    pub fn get_by_assigned_ip(&self, ip: &str) -> Option<&ClientEntry> {
+        let client_id = self.ip_index.get(ip)?;
+        self.entries.get(client_id)
+    }
+
     /// Check if a public key is authorized (exists, enabled, not expired).
     pub fn is_authorized(&self, public_key: &str) -> bool {
         match self.get_by_key(public_key) {
@@ -153,12 +171,22 @@ impl ClientRegistry {
         let entry = self.entries.get_mut(client_id)
             .ok_or_else(|| anyhow::anyhow!("Client '{}' not found", client_id))?;
         let old_key = entry.public_key.clone();
+        let old_ip = entry.assigned_ip.clone();
         updater(entry);
-        // If public key changed, update the index
+        // If public key changed, update the key index
         if entry.public_key != old_key {
             self.key_index.remove(&old_key);
             self.key_index.insert(entry.public_key.clone(), client_id.to_string());
         }
+        // If assigned IP changed, update the IP index
+        if entry.assigned_ip != old_ip {
+            if let Some(ref old) = old_ip {
+                self.ip_index.remove(old);
+            }
+            if let Some(ref new_ip) = entry.assigned_ip {
+                self.ip_index.insert(new_ip.clone(), client_id.to_string());
+            }
+        }
         Ok(())
     }
 
@@ -362,6 +390,7 @@ mod tests {
                 bytes_per_sec: 1_000_000,
                 burst_bytes: 2_000_000,
             }),
+            destination_policy: None,
         });
         let mut reg = ClientRegistry::new();
         reg.add(entry).unwrap();

rust/src/lib.rs

@@ -22,3 +22,4 @@ pub mod client_registry;
 pub mod acl;
 pub mod proxy_protocol;
 pub mod userspace_nat;
+pub mod bridge;

rust/src/network.rs

@@ -13,6 +13,10 @@ pub struct IpPool {
     allocated: HashMap<Ipv4Addr, String>,
     /// Next candidate offset (skipping .0 network and .1 gateway)
     next_offset: u32,
+    /// Minimum allocation offset (inclusive). Default: 2 (skip .0 network and .1 gateway).
+    min_offset: u32,
+    /// Maximum allocation offset (exclusive). Default: broadcast offset.
+    max_offset: u32,
 }
 
 impl IpPool {
@@ -28,11 +32,47 @@ impl IpPool {
             anyhow::bail!("Prefix too long for VPN pool: /{}", prefix_len);
         }
 
+        let host_bits = 32 - prefix_len as u32;
+        let max_offset = (1u32 << host_bits) - 1; // broadcast offset
+
         Ok(Self {
             network,
             prefix_len,
             allocated: HashMap::new(),
             next_offset: 2, // Skip .0 (network) and .1 (server/gateway)
+            min_offset: 2,
+            max_offset,
+        })
+    }
+
+    /// Create a new IP pool with a restricted allocation range within the subnet.
+    /// `range_start` and `range_end` are host offsets (e.g., 200 and 250 for .200-.250).
+    pub fn new_with_range(subnet: &str, range_start: u32, range_end: u32) -> Result<Self> {
+        let parts: Vec<&str> = subnet.split('/').collect();
+        if parts.len() != 2 {
+            anyhow::bail!("Invalid subnet format: {}", subnet);
+        }
+        let network: Ipv4Addr = parts[0].parse()?;
+        let prefix_len: u8 = parts[1].parse()?;
+        if prefix_len > 30 {
+            anyhow::bail!("Prefix too long for VPN pool: /{}", prefix_len);
+        }
+        if range_start >= range_end {
+            anyhow::bail!("Invalid IP range: start ({}) must be less than end ({})", range_start, range_end);
+        }
+        let host_bits = 32 - prefix_len as u32;
+        let broadcast_offset = (1u32 << host_bits) - 1;
+        if range_end > broadcast_offset {
+            anyhow::bail!("IP range end ({}) exceeds subnet broadcast ({})", range_end, broadcast_offset);
+        }
+
+        Ok(Self {
+            network,
+            prefix_len,
+            allocated: HashMap::new(),
+            next_offset: range_start,
+            min_offset: range_start,
+            max_offset: range_end + 1, // exclusive
         })
     }
 
@@ -44,22 +84,17 @@ impl IpPool {
 
     /// Total number of usable client addresses in the pool.
     pub fn capacity(&self) -> u32 {
-        let host_bits = 32 - self.prefix_len as u32;
-        let total = 1u32 << host_bits;
-        total.saturating_sub(3) // minus network, gateway, broadcast
+        self.max_offset.saturating_sub(self.min_offset)
     }
 
     /// Allocate an IP for a client. Returns the assigned IP.
     pub fn allocate(&mut self, client_id: &str) -> Result<Ipv4Addr> {
-        let host_bits = 32 - self.prefix_len as u32;
-        let max_offset = (1u32 << host_bits) - 1; // broadcast offset
-
         // Try to find a free IP starting from next_offset
         let start = self.next_offset;
         let mut offset = start;
         loop {
-            if offset >= max_offset {
-                offset = 2; // wrap around
+            if offset >= self.max_offset {
+                offset = self.min_offset; // wrap around
             }
 
             let ip = Ipv4Addr::from(u32::from(self.network) + offset);

rust/src/server.rs

@@ -25,7 +25,7 @@ use crate::tunnel::{self, TunConfig};
 const DEAD_PEER_TIMEOUT: Duration = Duration::from_secs(180);
 
 /// Destination routing policy for VPN client traffic.
-#[derive(Debug, Clone, Deserialize)]
+#[derive(Debug, Clone, Deserialize, Serialize)]
 #[serde(rename_all = "camelCase")]
 pub struct DestinationPolicyConfig {
     /// Default action: "forceTarget", "block", or "allow".
@@ -92,6 +92,17 @@ pub struct ServerConfig {
     /// Defaults to ["0.0.0.0/0"] (full tunnel).
     #[serde(alias = "clientAllowedIPs")]
     pub client_allowed_ips: Option<Vec<String>>,
+
+    // Bridge mode configuration (forwarding_mode: "bridge")
+
+    /// LAN subnet CIDR for bridge mode (e.g. "192.168.1.0/24").
+    pub bridge_lan_subnet: Option<String>,
+    /// Physical network interface to bridge (e.g. "eth0"). Auto-detected if omitted.
+    pub bridge_physical_interface: Option<String>,
+    /// Start of VPN client IP range within the LAN subnet (host offset, e.g. 200).
+    pub bridge_ip_range_start: Option<u32>,
+    /// End of VPN client IP range within the LAN subnet (host offset, e.g. 250).
+    pub bridge_ip_range_end: Option<u32>,
 }
 
 /// Information about a connected client.
@@ -148,6 +159,8 @@ pub enum ForwardingEngine {
     Tun(tokio::io::WriteHalf<tun::AsyncDevice>),
     /// Userspace NAT — packets sent to smoltcp-based NAT engine via channel.
     Socket(mpsc::Sender<Vec<u8>>),
+    /// L2 Bridge — packets sent to BridgeEngine via channel, bridged to host LAN.
+    Bridge(mpsc::Sender<Vec<u8>>),
     /// Testing/monitoring — packets are counted but not forwarded.
     Testing,
 }
@@ -191,7 +204,15 @@ impl VpnServer {
             anyhow::bail!("Server is already running");
         }
 
-        let ip_pool = IpPool::new(&config.subnet)?;
+        let mode = config.forwarding_mode.as_deref().unwrap_or("testing");
+        let ip_pool = if mode == "bridge" {
+            let lan_subnet = config.bridge_lan_subnet.as_deref().unwrap_or(&config.subnet);
+            let range_start = config.bridge_ip_range_start.unwrap_or(200);
+            let range_end = config.bridge_ip_range_end.unwrap_or(250);
+            IpPool::new_with_range(lan_subnet, range_start, range_end)?
+        } else {
+            IpPool::new(&config.subnet)?
+        };
 
         if config.enable_nat.unwrap_or(false) {
             if let Err(e) = crate::network::enable_ip_forwarding() {
@@ -205,7 +226,6 @@ impl VpnServer {
         }
 
         let link_mtu = config.mtu.unwrap_or(1420);
-        let mode = config.forwarding_mode.as_deref().unwrap_or("testing");
         let gateway_ip = ip_pool.gateway_addr();
 
         // Create forwarding engine based on mode
@@ -220,6 +240,12 @@ impl VpnServer {
                 packet_rx: mpsc::Receiver<Vec<u8>>,
                 shutdown_rx: mpsc::Receiver<()>,
             },
+            Bridge {
+                packet_tx: mpsc::Sender<Vec<u8>>,
+                packet_rx: mpsc::Receiver<Vec<u8>>,
+                tap_device: tun::AsyncDevice,
+                shutdown_rx: mpsc::Receiver<()>,
+            },
             Testing,
         }
 
@@ -243,6 +269,33 @@ impl VpnServer {
                 let (tx, rx) = mpsc::channel::<()>(1);
                 (ForwardingSetup::Socket { packet_tx, packet_rx, shutdown_rx: rx }, tx)
             }
+            "bridge" => {
+                info!("Starting L2 bridge forwarding (requires CAP_NET_ADMIN)");
+                let phys_iface = match &config.bridge_physical_interface {
+                    Some(i) => i.clone(),
+                    None => crate::bridge::detect_default_interface().await?,
+                };
+                let (host_ip, host_prefix) = crate::bridge::get_interface_ip(&phys_iface).await?;
+
+                let bridge_name = "svpn_br0";
+                let tap_name = "svpn_tap0";
+
+                // Create TAP + bridge infrastructure
+                let tap_device = crate::bridge::create_tap(tap_name, link_mtu)?;
+                crate::bridge::create_bridge(bridge_name).await?;
+                crate::bridge::set_interface_up(bridge_name).await?;
+                crate::bridge::bridge_add_interface(bridge_name, tap_name).await?;
+                crate::bridge::set_interface_up(tap_name).await?;
+                crate::bridge::bridge_add_interface(bridge_name, &phys_iface).await?;
+                crate::bridge::migrate_host_ip_to_bridge(&phys_iface, bridge_name, host_ip, host_prefix).await?;
+                crate::bridge::enable_proxy_arp(bridge_name).await?;
+
+                info!("Bridge {} created: TAP={}, physical={}, IP={}/{}", bridge_name, tap_name, phys_iface, host_ip, host_prefix);
+
+                let (packet_tx, packet_rx) = mpsc::channel::<Vec<u8>>(4096);
+                let (tx, rx) = mpsc::channel::<()>(1);
+                (ForwardingSetup::Bridge { packet_tx, packet_rx, tap_device, shutdown_rx: rx }, tx)
+            }
             _ => {
                 info!("Forwarding disabled (testing/monitoring mode)");
                 let (tx, _rx) = mpsc::channel::<()>(1);
@@ -301,6 +354,15 @@ impl VpnServer {
                     }
                 });
             }
+            ForwardingSetup::Bridge { packet_tx, packet_rx, tap_device, shutdown_rx } => {
+                *state.forwarding_engine.lock().await = ForwardingEngine::Bridge(packet_tx);
+                let bridge_engine = crate::bridge::BridgeEngine::new(state.clone());
+                tokio::spawn(async move {
+                    if let Err(e) = bridge_engine.run(tap_device, packet_rx, shutdown_rx).await {
+                        error!("Bridge engine error: {}", e);
+                    }
+                });
+            }
             ForwardingSetup::Testing => {}
         }
 
@@ -1430,6 +1492,9 @@ async fn handle_client_connection(
                                                     ForwardingEngine::Socket(sender) => {
                                                         let _ = sender.try_send(buf[..len].to_vec());
                                                     }
+                                                    ForwardingEngine::Bridge(sender) => {
+                                                        let _ = sender.try_send(buf[..len].to_vec());
+                                                    }
                                                     ForwardingEngine::Testing => {}
                                                 }
                                             }

rust/src/userspace_nat.rs

@@ -267,8 +267,19 @@ impl NatEngine {
     }
 
     /// Evaluate destination policy for a packet's destination IP.
-    fn evaluate_destination(&self, dst_ip: Ipv4Addr, dst_port: u16) -> DestinationAction {
-        let policy = match &self.destination_policy {
+    /// Checks per-client policy first (via src_ip → client registry lookup),
+    /// falls back to server-wide policy.
+    fn evaluate_destination(&self, src_ip: Ipv4Addr, dst_ip: Ipv4Addr, dst_port: u16) -> DestinationAction {
+        // Try per-client destination policy (lookup by tunnel IP)
+        let client_policy = if let Ok(registry) = self.state.client_registry.try_read() {
+            registry.get_by_assigned_ip(&src_ip.to_string())
+                .and_then(|e| e.security.as_ref())
+                .and_then(|s| s.destination_policy.clone())
+        } else {
+            None
+        };
+
+        let policy = match client_policy.as_ref().or(self.destination_policy.as_ref()) {
             Some(p) => p,
             None => return DestinationAction::PassThrough(SocketAddr::new(dst_ip.into(), dst_port)),
         };
@@ -326,7 +337,7 @@ impl NatEngine {
                 // Skip if session exists (including closing sessions — let FIN complete)
                 let session_exists = self.tcp_sessions.contains_key(&key);
                 if is_syn && !session_exists {
-                    match self.evaluate_destination(dst_ip, dst_port) {
+                    match self.evaluate_destination(src_ip, dst_ip, dst_port) {
                         DestinationAction::Drop => {
                             debug!("NAT: destination policy blocked TCP {}:{} -> {}:{}", src_ip, src_port, dst_ip, dst_port);
                             return;
@@ -350,7 +361,7 @@ impl NatEngine {
                 };
 
                 if !self.udp_sessions.contains_key(&key) {
-                    match self.evaluate_destination(dst_ip, dst_port) {
+                    match self.evaluate_destination(src_ip, dst_ip, dst_port) {
                         DestinationAction::Drop => {
                             debug!("NAT: destination policy blocked UDP {}:{} -> {}:{}", src_ip, src_port, dst_ip, dst_port);
                             return;

rust/src/wireguard.rs

@@ -576,6 +576,9 @@ pub async fn run_wg_listener(
                                     ForwardingEngine::Socket(sender) => {
                                         let _ = sender.try_send(packet.to_vec());
                                     }
+                                    ForwardingEngine::Bridge(sender) => {
+                                        let _ = sender.try_send(packet.to_vec());
+                                    }
                                     ForwardingEngine::Testing => {}
                                 }
                                 peer.stats.bytes_received += pkt_len;
@@ -608,6 +611,9 @@ pub async fn run_wg_listener(
                                     ForwardingEngine::Socket(sender) => {
                                         let _ = sender.try_send(packet.to_vec());
                                     }
+                                    ForwardingEngine::Bridge(sender) => {
+                                        let _ = sender.try_send(packet.to_vec());
+                                    }
                                     ForwardingEngine::Testing => {}
                                 }
                                 peer.stats.bytes_received += pkt_len;

ts/00_commitinfo_data.ts

@@ -3,6 +3,6 @@
  */
 export const commitinfo = {
   name: '@push.rocks/smartvpn',
-  version: '1.17.1',
+  version: '1.18.0',
   description: 'A VPN solution with TypeScript control plane and Rust data plane daemon'
 }

ts/smartvpn.interfaces.ts

@@ -93,7 +93,7 @@ export interface IVpnServerConfig {
   enableNat?: boolean;
   /** Forwarding mode: 'tun' (kernel TUN, requires root), 'socket' (userspace NAT),
    *  or 'testing' (monitoring only). Default: 'testing'. */
-  forwardingMode?: 'tun' | 'socket' | 'testing';
+  forwardingMode?: 'tun' | 'socket' | 'bridge' | 'testing';
   /** Default rate limit for new clients (bytes/sec). Omit for unlimited. */
   defaultRateLimitBytesPerSec?: number;
   /** Default burst size for new clients (bytes). Omit for unlimited. */
@@ -137,6 +137,22 @@ export interface IVpnServerConfig {
    *  Controls what traffic the client routes through the VPN tunnel.
    *  Defaults to ['0.0.0.0/0'] (full tunnel). Set to e.g. ['10.8.0.0/24'] for split tunnel. */
   clientAllowedIPs?: string[];
+
+  // Bridge mode configuration (forwardingMode: 'bridge')
+
+  /** LAN subnet CIDR for bridge mode (e.g. '192.168.1.0/24').
+   *  VPN clients get IPs from this subnet instead of the VPN subnet.
+   *  Required when forwardingMode is 'bridge'. */
+  bridgeLanSubnet?: string;
+  /** Physical network interface to bridge (e.g. 'eth0').
+   *  Auto-detected from the default route if omitted. */
+  bridgePhysicalInterface?: string;
+  /** Start of VPN client IP range within the LAN subnet (host offset, e.g. 200 for .200).
+   *  Default: 200. */
+  bridgeIpRangeStart?: number;
+  /** End of VPN client IP range within the LAN subnet (host offset, e.g. 250 for .250).
+   *  Default: 250. */
+  bridgeIpRangeEnd?: number;
 }
 
 /**
@@ -310,6 +326,10 @@ export interface IClientSecurity {
   maxConnections?: number;
   /** Per-client rate limiting. */
   rateLimit?: IClientRateLimit;
+  /** Per-client destination routing policy override.
+   *  When set, overrides the server-level destinationPolicy for this client's traffic.
+   *  Supports the same options: forceTarget, block, allow with allow/block lists. */
+  destinationPolicy?: IDestinationPolicy;
 }
 
 /**