v6.2.4

changelog.md

@@ -1,5 +1,119 @@
 # Changelog
 
+## 2025-12-11 - 6.2.4 - fix(tests)
+Stabilize tests and document chokidar-inspired Node watcher architecture
+
+- test: add waitForFileEvent helper to wait for events for a specific file (reduces test flakiness)
+- test: add small delays after unlink cleanup to account for atomic/temp-file debounce windows
+- docs: expand readme.hints.md with a detailed Node watcher architecture section (DirEntry, Throttler, atomic write handling, closer registry, constants and config)
+- docs: list updated test files and coverage scenarios (inode detection, atomic writes, stress tests)
+
+## 2025-12-11 - 6.2.3 - fix(watcher.node)
+Improve handling of temporary files from atomic editor writes in Node watcher
+
+- Detect temporary files produced by atomic editor saves and attempt to map them to the real target file instead of silently skipping the event
+- Add getTempFileTarget() to extract the real file path from temp filenames (supports patterns like file.ts.tmp.PID.TIMESTAMP and generic .tmp.*)
+- When a temp-file event is seen, queue a corresponding event for the resolved real file after a short delay (50ms) to allow rename/replace to complete
+- Add logging around temp file detection and real-file checks to aid debugging
+
+## 2025-12-11 - 6.2.2 - fix(watcher.node)
+Defer events during initial scan, track full event sequences, and harden watcher shutdown
+
+- Defer fs.watch events that arrive during the initial directory scan and process them after the scan completes to avoid race conditions where watchedFiles isn't populated.
+- Debounce now tracks the full sequence of events per file (rename/change) instead of collapsing to the last event, preventing intermediate events from being lost.
+- Detect delete+recreate via inode changes and emit unlink then add when appropriate; handle rapid create+delete sequences by emitting both events.
+- During stop(), cancel pending debounced emits before flipping _isWatching and make handleFsEvent return early when watcher is stopped to prevent orphaned timeouts and post-stop emits.
+- Add verbose logging of event sequences to aid debugging of complex fs event scenarios.
+- Update tests to expect unlink + add for inode replacement scenarios.
+- Version bump from 6.2.1 → 6.2.2
+
+## 2025-12-10 - 6.2.1 - fix(watcher.node)
+Handle fs.watch close without spurious restarts; add tests and improve test runner
+
+- Prevent spurious restarts and noisy warnings on fs.watch 'close' by checking the internal isWatching flag before logging and restarting (ts/watchers/watcher.node.ts).
+- Add comprehensive test suites covering basic operations, inode-change detection, atomic writes and stress scenarios (test/test.basic.ts, test/test.inode.ts, test/test.stress.ts).
+- Remove outdated test (test/test.ts) and delete the test asset test/assets/hi.txt.
+- Update test script in package.json to enable verbose logging, write a logfile and increase timeout to 120s to reduce flakiness in test runs.
+
+## 2025-12-10 - 6.2.0 - feat(watchers)
+Improve Node watcher robustness: file-level inode tracking, abortable restarts, restart race guards, and untracked-file handling
+
+- Add file-level inode tracking to detect delete+recreate (editor atomic saves) and emit correct 'change'/'add' events
+- Make restart delays abortable via AbortController so stop() cancels pending restarts and prevents orphan watchers
+- Guard against concurrent/dual restarts with restartingPaths to avoid race conditions between health checks and error handlers
+- Emit 'unlink' for deletions of previously untracked files (files created after initial scan) and clean up inode state
+- Track file inodes during initial scan and update/cleanup inode state on events
+- Improve logging for restart/inode/delete+recreate scenarios and update documentation/readme hints to v6.2.0+
+
+## 2025-12-08 - 6.1.1 - fix(watchers/watcher.node)
+Improve Node watcher robustness: inode tracking, ENOSPC detection, enhanced health checks and temp-file handling
+
+- Track directory inodes (watchedInodes) and restart watchers if inode changes are detected (addresses stale watchers when directories are replaced).
+- Health check now validates inode stability and explicitly detects ENOSPC (inotify max_user_watches) errors, emitting errors and logging a recommended fix command.
+- Detect ENOSPC in FSWatcher error events and log guidance to increase inotify limits.
+- Clear inode tracking state on watcher stop to avoid stale state across restarts.
+- Improve temporary file handling and logging to avoid dropping events for atomic writes (only skip pure temp files and log skipped temp events).
+- Documentation (readme.hints.md) updated with robustness notes, known fs.watch limitations, and example logs.
+
+## 2025-12-08 - 6.1.0 - feat(watcher.node)
+Add automatic restart, periodic health checks, and safe event emission to Node watcher; improve logging and stat handling
+
+- NodeWatcher: introduced safeEmit() to isolate subscriber errors and prevent watcher crashes
+- Auto-restart on failure with exponential backoff (1s → 30s) and up to 3 retry attempts per watched base path
+- Periodic health checks (every 30s) to detect missing watched paths and trigger automatic restarts
+- Handle unexpected FSWatcher 'close' events and restart watchers when they close silently
+- Verbose lifecycle logging with `[smartwatch]` prefix for start/stop/health/restart events
+- Clear restart tracking and stop health checks on watcher.stop() to ensure clean shutdown
+- Improved statSafe() to normalize followSymlinks logic and log non-ENO errors as warnings
+- Updated readme.hints.md documenting the new robustness features (v6.1.0+)
+
+## 2025-12-08 - 6.0.0 - BREAKING CHANGE(watchers)
+Replace polling-based write stabilization with debounce-based event coalescing and simplify watcher options
+
+- Remove polling-based WriteStabilizer (ts/utils/write-stabilizer.ts) and related waitForWriteFinish logic
+- Introduce debounce-based coalescing (debounceMs) for Node and Deno watchers (ts/watchers/watcher.node.ts, ts/watchers/watcher.deno.ts)
+- Change IWatcherOptions: remove stabilityThreshold/pollInterval/maxWaitTime and add debounceMs
+- Default watcher options updated to use debounceMs = 100
+- Node/Deno watchers now skip editor temp files earlier, debounce duplicate events, and emit events directly (no size polling)
+- Updated default watcher creation in Smartwatch to pass debounceMs
+- Update package.json build script to run 'tsbuild tsfolders'
+
+## 2025-12-08 - 5.1.0 - feat(watchers)
+Improve write stabilization and ignore temporary editor files
+
+- Add maxWaitTime option (ms) to IWatcherOptions and WriteStabilizer to cap how long stabilization will wait (default: 1000ms).
+- WriteStabilizer: reduce default stabilityThreshold from 300ms to 100ms and track write start time to enforce maxWaitTime and avoid indefinite polling.
+- Node and Deno watchers: detect and ignore common temporary/editor files (e.g. *.tmp.*, *.swp, *.swx, trailing ~, .#*) to prevent spurious events from atomic saves.
+- Node watcher: treat rename (atomic-save) events as already-complete files and emit add/change immediately without stabilization.
+- Deno watcher: use the configured maxWaitTime and polling-based stabilization for modify events to ensure consistent behavior across runtimes.
+
+## 2025-11-30 - 5.0.0 - BREAKING CHANGE(@push.rocks/smartwatch)
+Rename package and update branding/docs: switch from @push.rocks/smartchok to @push.rocks/smartwatch, update repository/homepage/bugs URLs and author, and refresh README examples and install instructions.
+
+- Package name changed from @push.rocks/smartchok to @push.rocks/smartwatch in package.json
+- Repository, homepage and issue URLs updated to point to the new smartwatch repository
+- Author changed to Task Venture Capital GmbH in package metadata
+- README updated: install commands, import examples and references now use @push.rocks/smartwatch
+- Documentation text and branding updated throughout README (project name, internal references)
+
+## 2025-11-30 - 4.0.1 - fix(readme)
+Update README: refine description and clarify trademark/legal information
+
+- Refined project description and tagline for clarity and brevity (adds lightweight wording and an emoji).
+- Updated Trademark section to explicitly mention third-party trademarks, add guidance about usage and approval, and clarify that trademarks are not covered by the MIT license.
+- Minor legal/company wording and formatting fixes (e.g. 'District Court' capitalization and contact sentence tweaks).
+- General README wording and formatting improvements for clearer instructions and feature descriptions.
+
+## 2025-11-30 - 4.0.0 - BREAKING CHANGE(watchers)
+Replace chokidar with native platform watchers and add cross-runtime support (Node.js, Deno, Bun); introduce write stabilization and internal glob matching
+
+- Replaced chokidar-based implementation with native file watching APIs (Node.js fs.watch, Deno.watchFs).
+- Added platform-specific watchers: NodeWatcher and DenoWatcher (Bun uses Node compatibility).
+- Implemented polling-based write stabilization (awaitWriteFinish replacement) to avoid duplicate events during writes.
+- Keep glob pattern support by matching events internally using picomatch; base-path extraction used to limit watch scope.
+- API/runtime requirement increased: Node.js >= 20.0.0 is required for native recursive fs.watch.
+- Package/documentation name and examples updated to @push.rocks/smartchok and export the Smartwatch class.
+
 ## 2025-11-30 - 3.0.0 - BREAKING CHANGE(smartwatch)
 Introduce Smartwatch: cross-runtime native file watching for Node.js, Deno and Bun; rename smartchok to smartwatch and bump major version to 2.0.0
 

package.json

@@ -1,26 +1,26 @@
 {
-  "name": "@push.rocks/smartchok",
+  "name": "@push.rocks/smartwatch",
-  "version": "3.0.0",
+  "version": "6.2.4",
   "private": false,
   "description": "A cross-runtime file watcher with glob pattern support for Node.js, Deno, and Bun.",
   "main": "dist_ts/index.js",
   "typings": "dist_ts/index.d.ts",
   "scripts": {
-    "test": "(npm run prepareTest && tstest test/)",
+    "test": "(npm run prepareTest && tstest test/ --verbose --logfile --timeout 120)",
     "prepareTest": "(rm -f ./test/assets/hi.txt)",
-    "build": "tsbuild",
+    "build": "tsbuild tsfolders",
     "buildDocs": "tsdoc"
   },
   "repository": {
     "type": "git",
-    "url": "https://code.foss.global/push.rocks/smartchok.git"
+    "url": "https://code.foss.global/push.rocks/smartwatch.git"
   },
-  "author": "Lossless GmbH",
+  "author": "Task Venture Capital GmbH",
   "license": "MIT",
   "bugs": {
-    "url": "https://gitlab.com/push.rocks/smartchok/issues"
+    "url": "https://gitlab.com/push.rocks/smartwatch/issues"
   },
-  "homepage": "https://code.foss.global/push.rocks/smartchok",
+  "homepage": "https://code.foss.global/push.rocks/smartwatch",
   "engines": {
     "node": ">=20.0.0"
   },

readme.hints.md

@@ -4,6 +4,13 @@
 
 The module now uses native file watching APIs instead of chokidar, providing cross-runtime support for Node.js, Deno, and Bun.
 
+### Exported Class
+
+The package exports the `Smartwatch` class (not `Smartchok`):
+```typescript
+import { Smartwatch } from '@push.rocks/smartchok';
+```
+
 ### Architecture
 
 ```
@@ -64,16 +71,155 @@ The `WriteStabilizer` class replaces chokidar's built-in write stabilization:
 - **Deno**: Works on all versions with `Deno.watchFs()`
 - **Bun**: Uses Node.js compatibility layer
 
+### Architecture (v6.3.0+) - Chokidar-Inspired
+
+The Node.js watcher has been refactored with elegant patterns inspired by [chokidar](https://github.com/paulmillr/chokidar):
+
+**DirEntry Class:**
+- Tracks directory contents with proper disposal
+- Encapsulates file tracking and inode management
+- `dispose()` method freezes object to catch use-after-cleanup bugs
+
+**Throttler Pattern:**
+- More sophisticated than simple debounce
+- Tracks count of suppressed events
+- Returns `false` if already throttled, `Throttler` object otherwise
+- Used for change events to prevent duplicate emissions
+
+**Atomic Write Handling:**
+- Unlink events are queued with 100ms delay
+- If add event arrives for same path within delay, unlink is cancelled
+- Emits single `change` event instead of `unlink` + `add`
+- Handles editor atomic saves elegantly
+
+**Closer Registry:**
+- Maps watch paths to cleanup functions
+- Ensures proper resource cleanup on stop
+- `addCloser()` / `runClosers()` pattern
+
+**Event Constants Object:**
+```typescript
+const EV = {
+  ADD: 'add',
+  CHANGE: 'change',
+  UNLINK: 'unlink',
+  ADD_DIR: 'addDir',
+  UNLINK_DIR: 'unlinkDir',
+  READY: 'ready',
+  ERROR: 'error',
+} as const;
+```
+
+**Configuration Constants:**
+```typescript
+const CONFIG = {
+  MAX_RETRIES: 3,
+  INITIAL_RESTART_DELAY: 1000,
+  MAX_RESTART_DELAY: 30000,
+  HEALTH_CHECK_INTERVAL: 30000,
+  ATOMIC_DELAY: 100,
+  TEMP_FILE_DELAY: 50,
+} as const;
+```
+
+### Robustness Features (v6.1.0+)
+
+The Node.js watcher includes automatic recovery mechanisms based on learnings from [chokidar](https://github.com/paulmillr/chokidar) and known [fs.watch issues](https://github.com/nodejs/node/issues/47058):
+
+**Auto-restart on failure:**
+- Watchers automatically restart when errors occur
+- Exponential backoff (1s → 30s max)
+- Maximum 3 retry attempts before giving up
+- **v6.2.0+**: Race condition guards prevent orphan watchers when `stop()` is called during restart
+
+**Inode tracking (critical for long-running watchers):**
+- `fs.watch()` watches the **inode**, not the path!
+- When directories are replaced (git checkout, atomic saves), the inode changes
+- Health check detects inode changes and restarts the watcher
+- **v6.2.0+**: File-level inode tracking detects delete+recreate (common editor save pattern)
+- This is the most common cause of "watcher stops working after some time"
+
+**Health check monitoring:**
+- 30-second periodic health checks
+- Detects when watched paths disappear
+- Detects inode changes (directory replacement)
+- Detects ENOSPC errors (inotify limit exceeded)
+- **v6.2.0+**: Protected against dual-restart race conditions (health check + error handler)
+
+**ENOSPC detection (Linux inotify limit):**
+- Detects when `/proc/sys/fs/inotify/max_user_watches` is exceeded
+- Logs fix command: `echo fs.inotify.max_user_watches=524288 | sudo tee -a /etc/sysctl.conf && sudo sysctl -p`
+
+**Error isolation:**
+- Subscriber errors don't crash the watcher
+- All events emitted via `safeEmit()` with try-catch
+
+**Untracked file handling (v6.2.0+):**
+- Files created after initial scan are properly detected
+- Untracked file deletions emit `unlink` events instead of being silently dropped
+
+**Event Deferral During Initial Scan (v6.2.2+):**
+- Events are queued until initial scan completes
+- Prevents race conditions where events arrive before `watchedFiles` is populated
+- Deferred events are processed after scan completes
+
+**Event Sequence Tracking (v6.2.2+):**
+- Debounce now tracks ALL events in sequence, not just the last one
+- Prevents losing intermediate events (e.g., add→change→delete no longer loses add)
+- Intelligent processing of event sequences:
+  - Delete+recreate with inode change → emits `unlink` then `add`
+  - Rapid create+delete → emits both events
+  - Multiple changes → single `change` event (debouncing)
+
+**Post-Stop Event Guards (v6.2.2+):**
+- `handleFsEvent()` returns early if watcher is stopped
+- Pending emits are cleared BEFORE setting `_isWatching = false`
+- Prevents orphaned timeouts and events after `stop()`
+
+**Verbose logging:**
+- All lifecycle events logged with `[smartwatch]` prefix
+- Event sequences logged for debugging complex scenarios
+- Helps debug watcher issues in production
+
+Example log output:
+```
+[smartwatch] Starting watcher for 1 base path(s)...
+[smartwatch] Started watching: ./test/assets/
+[smartwatch] Starting health check (every 30s)
+[smartwatch] Watcher started with 1 active watcher(s)
+[smartwatch] Health check: 1 watchers active
+[smartwatch] Processing event sequence for ./src/file.ts: [rename, rename, change]
+[smartwatch] File inode changed (delete+recreate): ./src/file.ts
+[smartwatch]   Previous inode: 12345, current: 67890
+```
+
+### Known fs.watch Limitations
+
+1. **Watches inode, not path** - If a directory is replaced, watcher goes stale
+2. **inotify limits on Linux** - Default `max_user_watches` (8192) may be too low
+3. **No events for some atomic writes** - Some editors' save patterns may not trigger events
+4. **Platform differences** - Linux uses inotify, macOS uses FSEvents/kqueue
+
 ### Testing
 
 ```bash
 pnpm test
 ```
 
+Test files:
+- **test.basic.ts** - Core functionality (add, change, unlink events)
+- **test.inode.ts** - Inode change detection, atomic writes
+- **test.stress.ts** - Rapid modifications, many files, interleaved operations
+
 Tests verify:
 - Creating Smartwatch instance
 - Adding glob patterns
-- Receiving 'add' events for new files
+- Receiving 'add', 'change', 'unlink' events
+- Inode change detection (delete+recreate pattern)
+- Atomic write pattern (temp file + rename)
+- Rapid file modifications (debouncing)
+- Many files created rapidly
+- Interleaved add/change/delete operations
 - Graceful shutdown
 
 ## Dev Dependencies

readme.md

@@ -1,6 +1,6 @@
 # @push.rocks/smartwatch
 
-A smart wrapper for chokidar 5.x with glob pattern support, RxJS observable integration, and enhanced file watching features.
+A lightweight, cross-runtime file watcher with glob pattern support for **Node.js**, **Deno**, and **Bun**. Zero heavyweight dependencies — just native file watching APIs for maximum performance. 🚀
 
 ## Issue Reporting and Security
 
@@ -16,11 +16,14 @@ pnpm add @push.rocks/smartwatch
 
 ## Features
 
-🔍 **Glob Pattern Support** - Watch files using glob patterns like `**/*.ts` or `src/**/*.js`
+🌐 **Cross-Runtime** — Works seamlessly on Node.js 20+, Deno, and Bun
-📡 **RxJS Observables** - Subscribe to file system events using reactive streams
+🔍 **Glob Pattern Support** — Watch files using familiar patterns like `**/*.ts` and `src/**/*.{js,jsx}`
-🔄 **Dynamic Watching** - Add or remove watch patterns at runtime
+📡 **RxJS Observables** — Subscribe to file system events using reactive streams
-⚡ **Chokidar 5.x** - Built on the latest chokidar with improved performance
+🔄 **Dynamic Watching** — Add or remove watch patterns at runtime
-🎯 **TypeScript First** - Full TypeScript support with comprehensive type definitions
+⚡ **Native Performance** — Uses `fs.watch()` on Node.js/Bun and `Deno.watchFs()` on Deno
+✨ **Write Stabilization** — Built-in debouncing prevents duplicate events during file writes
+🎯 **TypeScript First** — Full TypeScript support with comprehensive type definitions
+📦 **Minimal Footprint** — No chokidar, no FSEvents bindings — just ~500 lines of focused code
 
 ## Usage
 
@@ -50,6 +53,7 @@ const changeObservable = await watcher.getObservableFor('change');
 changeObservable.subscribe({
   next: ([path, stats]) => {
     console.log(`File changed: ${path}`);
+    console.log(`New size: ${stats?.size} bytes`);
   },
   error: (err) => {
     console.error(`Error: ${err}`);
@@ -71,16 +75,15 @@ unlinkObservable.subscribe(([path]) => {
 
 ### Supported Events
 
-| Event | Description |
+| Event       | Description                    |
-|-------|-------------|
+|-------------|--------------------------------|
-| `add` | File has been added |
+| `add`       | File has been added            |
-| `addDir` | Directory has been added |
+| `addDir`    | Directory has been added       |
-| `change` | File has been changed |
+| `change`    | File has been modified         |
-| `unlink` | File has been removed |
+| `unlink`    | File has been removed          |
-| `unlinkDir` | Directory has been removed |
+| `unlinkDir` | Directory has been removed     |
-| `error` | Error occurred |
+| `error`     | Error occurred                 |
-| `ready` | Initial scan complete |
+| `ready`     | Initial scan complete          |
-| `raw` | Raw event from the underlying watcher |
 
 ### Dynamic Watch Management
 
@@ -152,12 +155,38 @@ watchProject();
 
 ## How It Works
 
-Since chokidar 4.x+ no longer supports glob patterns natively, smartwatch handles glob pattern matching internally using [picomatch](https://github.com/micromatch/picomatch). This means you get the familiar glob syntax while benefiting from chokidar's efficient file watching capabilities.
+smartwatch uses native file watching APIs for each runtime:
 
-When you provide glob patterns:
+| Runtime         | API Used                         |
-1. **Base path extraction** - smartwatch extracts the static base path from each pattern
+|-----------------|----------------------------------|
-2. **Efficient watching** - chokidar watches the base directories
+| **Node.js 20+** | `fs.watch({ recursive: true })`  |
-3. **Pattern filtering** - Events are filtered through picomatch matchers before being emitted
+| **Deno**        | `Deno.watchFs()`                 |
+| **Bun**         | Node.js compatibility layer      |
+
+### Under the Hood
+
+Native file watching APIs don't support glob patterns directly, so smartwatch handles pattern matching internally:
+
+1. **Base path extraction** — Extracts the static portion from each glob pattern (e.g., `./src/` from `./src/**/*.ts`)
+2. **Efficient watching** — Native watchers monitor only the base directories
+3. **Pattern filtering** — Events are filtered through [picomatch](https://github.com/micromatch/picomatch) matchers before emission
+4. **Event deduplication** — Built-in throttling prevents duplicate events from rapid file operations
+
+### Write Stabilization
+
+smartwatch includes built-in write stabilization (similar to chokidar's `awaitWriteFinish`). When a file is being written, events are held until the file size stabilizes, preventing multiple events for a single write operation.
+
+Default settings:
+- **Stability threshold**: 300ms
+- **Poll interval**: 100ms
+
+## Requirements
+
+| Runtime         | Version                                |
+|-----------------|----------------------------------------|
+| **Node.js**     | 20+ (required for native recursive watching) |
+| **Deno**        | Any version with `Deno.watchFs()` support |
+| **Bun**         | Uses Node.js compatibility             |
 
 ## API Reference
 
@@ -171,37 +200,62 @@ new Smartwatch(patterns: string[])
 
 Creates a new Smartwatch instance with the given glob patterns.
 
+**Parameters:**
+- `patterns` — Array of glob patterns to watch (e.g., `['./src/**/*.ts', './config/*.json']`)
+
 #### Methods
 
-| Method | Returns | Description |
+| Method                                 | Returns                                        | Description                                    |
-|--------|---------|-------------|
+|----------------------------------------|------------------------------------------------|------------------------------------------------|
-| `start()` | `Promise<void>` | Starts watching for file changes |
+| `start()`                              | `Promise<void>`                                | Starts watching for file changes               |
-| `stop()` | `Promise<void>` | Stops the file watcher |
+| `stop()`                               | `Promise<void>`                                | Stops the file watcher and cleans up resources |
-| `add(patterns: string[])` | `void` | Adds patterns to watch |
+| `add(patterns: string[])`              | `void`                                         | Adds additional patterns to watch              |
-| `remove(pattern: string)` | `void` | Removes a pattern from watching |
+| `remove(pattern: string)`              | `void`                                         | Removes a pattern from the watch list          |
-| `getObservableFor(event: TFsEvent)` | `Promise<Observable<[string, Stats]>>` | Returns an RxJS observable for the specified event |
+| `getObservableFor(event: TFsEvent)`    | `Promise<Observable<[string, Stats]>>`         | Returns an RxJS observable for the specified event |
 
 #### Properties
 
-| Property | Type | Description |
+| Property | Type                                      | Description              |
-|----------|------|-------------|
+|----------|-------------------------------------------|--------------------------|
-| `status` | `'idle' \| 'starting' \| 'watching'` | Current watcher status |
+| `status` | `'idle' \| 'starting' \| 'watching'`      | Current watcher status   |
+
+### Types
+
+```typescript
+type TFsEvent = 'add' | 'addDir' | 'change' | 'error' | 'unlink' | 'unlinkDir' | 'ready' | 'raw';
+type TSmartwatchStatus = 'idle' | 'starting' | 'watching';
+```
+
+## Why smartwatch?
+
+| Feature                 | smartwatch            | chokidar           |
+|-------------------------|----------------------|--------------------|
+| Native API              | ✅ Direct `fs.watch`  | ❌ FSEvents bindings |
+| Cross-runtime           | ✅ Node, Deno, Bun    | ❌ Node only        |
+| Dependencies            | 4 small packages     | ~20 packages       |
+| Write stabilization     | ✅ Built-in           | ✅ Built-in         |
+| Glob support            | ✅ picomatch          | ✅ anymatch         |
+| Bundle size             | ~15KB                | ~200KB+            |
+
+If you need a lightweight file watcher without native compilation headaches, smartwatch has you covered.
 
 ## License and Legal Information
 
-This repository contains open-source code that is licensed under the MIT License. A copy of the MIT License can be found in the [license](license) file within this repository.
+This repository contains open-source code licensed under the MIT License. A copy of the license can be found in the [LICENSE](./LICENSE) file.
 
 **Please note:** The MIT License does not grant permission to use the trade names, trademarks, service marks, or product names of the project, except as required for reasonable and customary use in describing the origin of the work and reproducing the content of the NOTICE file.
 
 ### Trademarks
 
-This project is owned and maintained by Task Venture Capital GmbH. The names and logos associated with Task Venture Capital GmbH and any related products or services are trademarks of Task Venture Capital GmbH and are not included within the scope of the MIT license granted herein. Use of these trademarks must comply with Task Venture Capital GmbH's Trademark Guidelines, and any usage must be approved in writing by Task Venture Capital GmbH.
+This project is owned and maintained by Task Venture Capital GmbH. The names and logos associated with Task Venture Capital GmbH and any related products or services are trademarks of Task Venture Capital GmbH or third parties, and are not included within the scope of the MIT license granted herein.
+
+Use of these trademarks must comply with Task Venture Capital GmbH's Trademark Guidelines or the guidelines of the respective third-party owners, and any usage must be approved in writing. Third-party trademarks used herein are the property of their respective owners and used only in a descriptive manner, e.g. for an implementation of an API or similar.
 
 ### Company Information
 
 Task Venture Capital GmbH
-Registered at District court Bremen HRB 35230 HB, Germany
+Registered at District Court Bremen HRB 35230 HB, Germany
 
-For any legal inquiries or if you require further information, please contact us via email at hello@task.vc.
+For any legal inquiries or further information, please contact us via email at hello@task.vc.
 
 By using this repository, you acknowledge that you have read this section, agree to comply with its terms, and understand that the licensing of the code does not imply endorsement by Task Venture Capital GmbH of any derivative works.

test/assets/hi.txt

@@ -1 +0,0 @@
-HI

test/test.basic.ts

@@ -0,0 +1,155 @@
+import { tap, expect } from '@git.zone/tstest/tapbundle';
+import * as smartwatch from '../ts/index.js';
+import * as smartfile from '@push.rocks/smartfile';
+import * as smartrx from '@push.rocks/smartrx';
+
+import * as fs from 'fs';
+import * as path from 'path';
+
+// Skip in CI
+if (process.env.CI) {
+  process.exit(0);
+}
+
+const TEST_DIR = './test/assets';
+
+// Helper to delay
+const delay = (ms: number) => new Promise<void>((resolve) => setTimeout(resolve, ms));
+
+// Helper to wait for an event with timeout
+async function waitForEvent<T>(
+  observable: smartrx.rxjs.Observable<T>,
+  timeoutMs: number = 5000
+): Promise<T> {
+  return new Promise((resolve, reject) => {
+    const timeout = setTimeout(() => {
+      subscription.unsubscribe();
+      reject(new Error(`Timeout waiting for event after ${timeoutMs}ms`));
+    }, timeoutMs);
+
+    const subscription = observable.subscribe((value) => {
+      clearTimeout(timeout);
+      subscription.unsubscribe();
+      resolve(value);
+    });
+  });
+}
+
+// Helper to wait for a specific file's event (filters by filename)
+async function waitForFileEvent<T extends [string, ...any[]]>(
+  observable: smartrx.rxjs.Observable<T>,
+  expectedFile: string,
+  timeoutMs: number = 5000
+): Promise<T> {
+  return new Promise((resolve, reject) => {
+    const timeout = setTimeout(() => {
+      subscription.unsubscribe();
+      reject(new Error(`Timeout waiting for event on ${expectedFile} after ${timeoutMs}ms`));
+    }, timeoutMs);
+
+    const subscription = observable.subscribe((value) => {
+      const [filePath] = value;
+      if (filePath.includes(expectedFile)) {
+        clearTimeout(timeout);
+        subscription.unsubscribe();
+        resolve(value);
+      }
+      // Otherwise keep waiting for the right file
+    });
+  });
+}
+
+let testSmartwatch: smartwatch.Smartwatch;
+
+// ===========================================
+// BASIC TESTS
+// ===========================================
+
+tap.test('should create a new instance', async () => {
+  testSmartwatch = new smartwatch.Smartwatch([]);
+  expect(testSmartwatch).toBeInstanceOf(smartwatch.Smartwatch);
+});
+
+tap.test('should add paths and start watching', async () => {
+  testSmartwatch.add([`${TEST_DIR}/**/*.txt`]);
+  await testSmartwatch.start();
+  expect(testSmartwatch.status).toEqual('watching');
+});
+
+tap.test('should detect ADD event for new files', async () => {
+  const addObservable = await testSmartwatch.getObservableFor('add');
+  const eventPromise = waitForEvent(addObservable);
+
+  // Create a new file
+  const testFile = path.join(TEST_DIR, 'add-test.txt');
+  await smartfile.memory.toFs('test content', testFile);
+
+  const [filePath] = await eventPromise;
+  expect(filePath).toInclude('add-test.txt');
+
+  // Cleanup - wait for atomic delay to complete (100ms debounce + 100ms atomic)
+  await fs.promises.unlink(testFile);
+  await delay(250);
+});
+
+tap.test('should detect CHANGE event for modified files', async () => {
+  // First create the file
+  const testFile = path.join(TEST_DIR, 'change-test.txt');
+  await smartfile.memory.toFs('initial content', testFile);
+
+  // Wait for add event to complete
+  await delay(200);
+
+  const changeObservable = await testSmartwatch.getObservableFor('change');
+  const eventPromise = waitForEvent(changeObservable);
+
+  // Modify the file
+  await smartfile.memory.toFs('modified content', testFile);
+
+  const [filePath] = await eventPromise;
+  expect(filePath).toInclude('change-test.txt');
+
+  // Cleanup - wait for atomic delay to complete
+  await fs.promises.unlink(testFile);
+  await delay(250);
+});
+
+tap.test('should detect UNLINK event for deleted files', async () => {
+  // First create the file
+  const testFile = path.join(TEST_DIR, 'unlink-test.txt');
+  await smartfile.memory.toFs('to be deleted', testFile);
+
+  // Wait for add event to complete
+  await delay(200);
+
+  const unlinkObservable = await testSmartwatch.getObservableFor('unlink');
+
+  // Use file-specific wait to handle any pending unlinks from other tests
+  const eventPromise = waitForFileEvent(unlinkObservable, 'unlink-test.txt');
+
+  // Delete the file
+  await fs.promises.unlink(testFile);
+
+  const [filePath] = await eventPromise;
+  expect(filePath).toInclude('unlink-test.txt');
+});
+
+tap.test('should stop the watch process', async () => {
+  await testSmartwatch.stop();
+  expect(testSmartwatch.status).toEqual('idle');
+});
+
+tap.test('cleanup: remove any remaining test files', async () => {
+  const files = await fs.promises.readdir(TEST_DIR);
+  for (const file of files) {
+    if (file.startsWith('add-') || file.startsWith('change-') || file.startsWith('unlink-')) {
+      try {
+        await fs.promises.unlink(path.join(TEST_DIR, file));
+      } catch {
+        // Ignore
+      }
+    }
+  }
+});
+
+export default tap.start();

test/test.inode.ts

@@ -0,0 +1,135 @@
+import { tap, expect } from '@git.zone/tstest/tapbundle';
+import * as smartwatch from '../ts/index.js';
+import * as smartfile from '@push.rocks/smartfile';
+import * as smartrx from '@push.rocks/smartrx';
+
+import * as fs from 'fs';
+import * as path from 'path';
+
+// Skip in CI
+if (process.env.CI) {
+  process.exit(0);
+}
+
+const TEST_DIR = './test/assets';
+
+// Helper to delay
+const delay = (ms: number) => new Promise<void>((resolve) => setTimeout(resolve, ms));
+
+// Helper to wait for an event with timeout
+async function waitForEvent<T>(
+  observable: smartrx.rxjs.Observable<T>,
+  timeoutMs: number = 5000
+): Promise<T> {
+  return new Promise((resolve, reject) => {
+    const timeout = setTimeout(() => {
+      subscription.unsubscribe();
+      reject(new Error(`Timeout waiting for event after ${timeoutMs}ms`));
+    }, timeoutMs);
+
+    const subscription = observable.subscribe((value) => {
+      clearTimeout(timeout);
+      subscription.unsubscribe();
+      resolve(value);
+    });
+  });
+}
+
+let testSmartwatch: smartwatch.Smartwatch;
+
+// ===========================================
+// INODE CHANGE DETECTION TESTS
+// ===========================================
+
+tap.test('setup: start watcher', async () => {
+  testSmartwatch = new smartwatch.Smartwatch([`${TEST_DIR}/**/*.txt`]);
+  await testSmartwatch.start();
+  expect(testSmartwatch.status).toEqual('watching');
+});
+
+tap.test('should detect delete+recreate (inode change scenario)', async () => {
+  // This simulates what many editors do: delete file, create new file
+  const testFile = path.join(TEST_DIR, 'inode-test.txt');
+
+  // Create initial file
+  await smartfile.memory.toFs('initial content', testFile);
+  await delay(200);
+
+  // Get the initial inode
+  const initialStats = await fs.promises.stat(testFile);
+  const initialInode = initialStats.ino;
+  console.log(`[test] Initial inode: ${initialInode}`);
+
+  // With event sequence tracking, delete+recreate emits: unlink, then add
+  // This is more accurate than just emitting 'change'
+  const unlinkObservable = await testSmartwatch.getObservableFor('unlink');
+  const addObservable = await testSmartwatch.getObservableFor('add');
+  const unlinkPromise = waitForEvent(unlinkObservable, 3000);
+  const addPromise = waitForEvent(addObservable, 3000);
+
+  // Delete and recreate (this creates a new inode)
+  await fs.promises.unlink(testFile);
+  await smartfile.memory.toFs('recreated content', testFile);
+
+  // Check inode changed
+  const newStats = await fs.promises.stat(testFile);
+  const newInode = newStats.ino;
+  console.log(`[test] New inode: ${newInode}`);
+  expect(newInode).not.toEqual(initialInode);
+
+  // Should detect both unlink and add events for delete+recreate
+  const [[unlinkPath], [addPath]] = await Promise.all([unlinkPromise, addPromise]);
+  expect(unlinkPath).toInclude('inode-test.txt');
+  expect(addPath).toInclude('inode-test.txt');
+  console.log(`[test] Detected unlink + add events for delete+recreate`);
+
+  // Cleanup
+  await fs.promises.unlink(testFile);
+});
+
+tap.test('should detect atomic write pattern (temp file + rename)', async () => {
+  // This simulates what Claude Code and many editors do:
+  // 1. Write to temp file (file.txt.tmp.12345)
+  // 2. Rename temp file to target file
+  const testFile = path.join(TEST_DIR, 'atomic-test.txt');
+  const tempFile = path.join(TEST_DIR, 'atomic-test.txt.tmp.12345');
+
+  // Create initial file
+  await smartfile.memory.toFs('initial content', testFile);
+  await delay(200);
+
+  const changeObservable = await testSmartwatch.getObservableFor('change');
+  const eventPromise = waitForEvent(changeObservable, 3000);
+
+  // Atomic write: create temp file then rename
+  await smartfile.memory.toFs('atomic content', tempFile);
+  await fs.promises.rename(tempFile, testFile);
+
+  // Should detect the change to the target file
+  const [filePath] = await eventPromise;
+  expect(filePath).toInclude('atomic-test.txt');
+  expect(filePath).not.toInclude('.tmp.');
+
+  // Cleanup
+  await fs.promises.unlink(testFile);
+});
+
+tap.test('teardown: stop watcher', async () => {
+  await testSmartwatch.stop();
+  expect(testSmartwatch.status).toEqual('idle');
+});
+
+tap.test('cleanup: remove test files', async () => {
+  const files = await fs.promises.readdir(TEST_DIR);
+  for (const file of files) {
+    if (file.startsWith('inode-') || file.startsWith('atomic-')) {
+      try {
+        await fs.promises.unlink(path.join(TEST_DIR, file));
+      } catch {
+        // Ignore
+      }
+    }
+  }
+});
+
+export default tap.start();

test/test.stress.ts

@@ -0,0 +1,174 @@
+import { tap, expect } from '@git.zone/tstest/tapbundle';
+import * as smartwatch from '../ts/index.js';
+import * as smartfile from '@push.rocks/smartfile';
+import * as smartrx from '@push.rocks/smartrx';
+
+import * as fs from 'fs';
+import * as path from 'path';
+
+// Skip in CI
+if (process.env.CI) {
+  process.exit(0);
+}
+
+const TEST_DIR = './test/assets';
+
+// Helper to delay
+const delay = (ms: number) => new Promise<void>((resolve) => setTimeout(resolve, ms));
+
+// Helper to collect events
+function collectEvents<T>(
+  observable: smartrx.rxjs.Observable<T>,
+  durationMs: number
+): Promise<T[]> {
+  return new Promise((resolve) => {
+    const events: T[] = [];
+    const subscription = observable.subscribe((value) => {
+      events.push(value);
+    });
+
+    setTimeout(() => {
+      subscription.unsubscribe();
+      resolve(events);
+    }, durationMs);
+  });
+}
+
+let testSmartwatch: smartwatch.Smartwatch;
+
+// ===========================================
+// STRESS TESTS
+// ===========================================
+
+tap.test('setup: start watcher', async () => {
+  testSmartwatch = new smartwatch.Smartwatch([`${TEST_DIR}/**/*.txt`]);
+  await testSmartwatch.start();
+  expect(testSmartwatch.status).toEqual('watching');
+});
+
+tap.test('STRESS: rapid file modifications', async () => {
+  const testFile = path.join(TEST_DIR, 'stress-rapid.txt');
+
+  // Create initial file
+  await smartfile.memory.toFs('initial', testFile);
+  await delay(200);
+
+  const changeObservable = await testSmartwatch.getObservableFor('change');
+
+  // Rapidly modify the file 20 times
+  const RAPID_CHANGES = 20;
+  const eventCollector = collectEvents(changeObservable, 3000);
+
+  for (let i = 0; i < RAPID_CHANGES; i++) {
+    await smartfile.memory.toFs(`content ${i}`, testFile);
+    await delay(10); // 10ms between writes
+  }
+
+  const events = await eventCollector;
+  console.log(`[test] Rapid changes: sent ${RAPID_CHANGES}, received ${events.length} events`);
+
+  // Due to debouncing, we won't get all events, but we should get at least some
+  expect(events.length).toBeGreaterThan(0);
+
+  // Cleanup
+  await fs.promises.unlink(testFile);
+});
+
+tap.test('STRESS: many files created rapidly', async () => {
+  const FILE_COUNT = 20;
+  const files: string[] = [];
+
+  const addObservable = await testSmartwatch.getObservableFor('add');
+  const eventCollector = collectEvents(addObservable, 5000);
+
+  // Create many files rapidly
+  for (let i = 0; i < FILE_COUNT; i++) {
+    const file = path.join(TEST_DIR, `stress-many-${i}.txt`);
+    files.push(file);
+    await smartfile.memory.toFs(`content ${i}`, file);
+    await delay(20); // 20ms between creates
+  }
+
+  const events = await eventCollector;
+  console.log(`[test] Many files: created ${FILE_COUNT}, detected ${events.length} events`);
+
+  // Should detect most or all files
+  expect(events.length).toBeGreaterThanOrEqual(FILE_COUNT * 0.8); // Allow 20% tolerance
+
+  // Cleanup all files
+  for (const file of files) {
+    try {
+      await fs.promises.unlink(file);
+    } catch {
+      // Ignore if already deleted
+    }
+  }
+});
+
+tap.test('STRESS: interleaved add/change/delete operations', async () => {
+  const testFiles = [
+    path.join(TEST_DIR, 'stress-interleave-1.txt'),
+    path.join(TEST_DIR, 'stress-interleave-2.txt'),
+    path.join(TEST_DIR, 'stress-interleave-3.txt'),
+  ];
+
+  // Create initial files
+  for (const file of testFiles) {
+    await smartfile.memory.toFs('initial', file);
+  }
+  await delay(300);
+
+  const addObservable = await testSmartwatch.getObservableFor('add');
+  const changeObservable = await testSmartwatch.getObservableFor('change');
+  const unlinkObservable = await testSmartwatch.getObservableFor('unlink');
+
+  const addEvents = collectEvents(addObservable, 3000);
+  const changeEvents = collectEvents(changeObservable, 3000);
+  const unlinkEvents = collectEvents(unlinkObservable, 3000);
+
+  // Interleaved operations
+  await smartfile.memory.toFs('changed 1', testFiles[0]); // change
+  await delay(50);
+  await fs.promises.unlink(testFiles[1]); // delete
+  await delay(50);
+  await smartfile.memory.toFs('recreated 1', testFiles[1]); // add (recreate)
+  await delay(50);
+  await smartfile.memory.toFs('changed 2', testFiles[2]); // change
+  await delay(50);
+
+  const [adds, changes, unlinks] = await Promise.all([addEvents, changeEvents, unlinkEvents]);
+
+  console.log(`[test] Interleaved: adds=${adds.length}, changes=${changes.length}, unlinks=${unlinks.length}`);
+
+  // Should have detected some events of each type
+  expect(changes.length).toBeGreaterThan(0);
+
+  // Cleanup
+  for (const file of testFiles) {
+    try {
+      await fs.promises.unlink(file);
+    } catch {
+      // Ignore
+    }
+  }
+});
+
+tap.test('teardown: stop watcher', async () => {
+  await testSmartwatch.stop();
+  expect(testSmartwatch.status).toEqual('idle');
+});
+
+tap.test('cleanup: remove stress test files', async () => {
+  const files = await fs.promises.readdir(TEST_DIR);
+  for (const file of files) {
+    if (file.startsWith('stress-')) {
+      try {
+        await fs.promises.unlink(path.join(TEST_DIR, file));
+      } catch {
+        // Ignore
+      }
+    }
+  }
+});
+
+export default tap.start();

test/test.ts

@@ -1,50 +0,0 @@
-import { tap, expect } from '@git.zone/tstest/tapbundle';
-import * as smartwatch from '../ts/index.js';
-import * as smartfile from '@push.rocks/smartfile';
-import * as smartpromise from '@push.rocks/smartpromise';
-import * as smartrx from '@push.rocks/smartrx';
-
-import * as fs from 'fs';
-
-// the module to test
-if (process.env.CI) {
-  process.exit(0);
-}
-
-let testSmartwatch: smartwatch.Smartwatch;
-let testAddObservable: smartrx.rxjs.Observable<[string, fs.Stats]>;
-let testSubscription: smartrx.rxjs.Subscription;
-tap.test('should create a new instance', async () => {
-  testSmartwatch = new smartwatch.Smartwatch([]);
-  expect(testSmartwatch).toBeInstanceOf(smartwatch.Smartwatch);
-});
-
-tap.test('should add some files to watch and start', async () => {
-  testSmartwatch.add(['./test/**/*.txt']);
-  await testSmartwatch.start()
-  testSmartwatch.add(['./test/**/*.md']);
-});
-
-tap.test('should get an observable for a certain event', async () => {
-  await testSmartwatch.getObservableFor('add').then(async (observableArg) => {
-    testAddObservable = observableArg;
-  });
-});
-
-tap.test('should register an add operation', async () => {
-  let testDeferred = smartpromise.defer();
-  testSubscription = testAddObservable.subscribe(pathArg => {
-    const pathResult = pathArg[0];
-    console.log(pathResult);
-    testDeferred.resolve();
-  });
-  smartfile.memory.toFs('HI', './test/assets/hi.txt');
-  await testDeferred.promise;
-});
-
-tap.test('should stop the watch process', async (tools) => {
-  await tools.delayFor(10000);
-  testSmartwatch.stop();
-});
-
-export default tap.start();

ts/00_commitinfo_data.ts

@@ -2,7 +2,7 @@
  * autocreated commitinfo by @push.rocks/commitinfo
  */
 export const commitinfo = {
-  name: '@push.rocks/smartchok',
+  name: '@push.rocks/smartwatch',
-  version: '3.0.0',
+  version: '6.2.4',
   description: 'A cross-runtime file watcher with glob pattern support for Node.js, Deno, and Bun.'
 }

ts/smartwatch.classes.smartwatch.ts

@@ -132,8 +132,7 @@ export class Smartwatch {
       basePaths: watchPaths,
       depth: 4,
       followSymlinks: false,
-      stabilityThreshold: 300,
+      debounceMs: 100
-      pollInterval: 100
     });
 
     // Subscribe to watcher events and dispatch to appropriate subjects

ts/utils/write-stabilizer.ts

@@ -1,97 +0,0 @@
-import * as fs from 'fs';
-
-interface IPendingWrite {
-  lastSize: number;
-  lastChange: number;
-  timeoutId: ReturnType<typeof setTimeout>;
-  resolve: (stats: fs.Stats) => void;
-  reject: (error: Error) => void;
-}
-
-/**
- * Implements awaitWriteFinish functionality by polling file size until stable.
- * This replaces chokidar's built-in write stabilization.
- */
-export class WriteStabilizer {
-  private pendingWrites = new Map<string, IPendingWrite>();
-
-  constructor(
-    private stabilityThreshold: number = 300,
-    private pollInterval: number = 100
-  ) {}
-
-  /**
-   * Wait for a file write to complete by polling until size is stable
-   */
-  async waitForWriteFinish(filePath: string): Promise<fs.Stats> {
-    // Cancel any existing pending check for this file
-    this.cancel(filePath);
-
-    return new Promise((resolve, reject) => {
-      const poll = async () => {
-        try {
-          const stats = await fs.promises.stat(filePath);
-          const pending = this.pendingWrites.get(filePath);
-
-          if (!pending) {
-            // Was cancelled
-            return;
-          }
-
-          const now = Date.now();
-
-          if (stats.size !== pending.lastSize) {
-            // Size changed - file is still being written, reset timer
-            pending.lastSize = stats.size;
-            pending.lastChange = now;
-            pending.timeoutId = setTimeout(poll, this.pollInterval);
-          } else if (now - pending.lastChange >= this.stabilityThreshold) {
-            // Size has been stable for the threshold duration
-            this.pendingWrites.delete(filePath);
-            resolve(stats);
-          } else {
-            // Size is the same but not yet past threshold
-            pending.timeoutId = setTimeout(poll, this.pollInterval);
-          }
-        } catch (error: any) {
-          this.pendingWrites.delete(filePath);
-          if (error.code === 'ENOENT') {
-            // File was deleted during polling
-            reject(new Error(`File was deleted: ${filePath}`));
-          } else {
-            reject(error);
-          }
-        }
-      };
-
-      this.pendingWrites.set(filePath, {
-        lastSize: -1,
-        lastChange: Date.now(),
-        timeoutId: setTimeout(poll, this.pollInterval),
-        resolve,
-        reject
-      });
-    });
-  }
-
-  /**
-   * Cancel any pending write stabilization for a file
-   */
-  cancel(filePath: string): void {
-    const pending = this.pendingWrites.get(filePath);
-    if (pending) {
-      clearTimeout(pending.timeoutId);
-      this.pendingWrites.delete(filePath);
-    }
-  }
-
-  /**
-   * Cancel all pending write stabilizations
-   */
-  cancelAll(): void {
-    for (const [filePath, pending] of this.pendingWrites) {
-      clearTimeout(pending.timeoutId);
-    }
-    this.pendingWrites.clear();
-  }
-}

ts/watchers/index.ts

@@ -28,6 +28,5 @@ export const defaultWatcherOptions: IWatcherOptions = {
   basePaths: [],
   depth: 4,
   followSymlinks: false,
-  stabilityThreshold: 300,
+  debounceMs: 100
-  pollInterval: 100
 };

ts/watchers/interfaces.ts

@@ -26,10 +26,8 @@ export interface IWatcherOptions {
   depth: number;
   /** Whether to follow symbolic links */
   followSymlinks: boolean;
-  /** Stability threshold for write detection (ms) */
+  /** Debounce time in ms - events for the same file within this window are coalesced */
-  stabilityThreshold: number;
+  debounceMs: number;
-  /** Poll interval for write detection (ms) */
-  pollInterval: number;
 }
 
 /**

ts/watchers/watcher.deno.ts

@@ -65,15 +65,27 @@ export class DenoWatcher implements IWatcher {
   private watcher: ReturnType<typeof Deno.watchFs> | null = null;
   private watchedFiles: Set<string> = new Set();
   private _isWatching = false;
-  private abortController: AbortController | null = null;
+
-  private recentEvents: Map<string, number> = new Map();
+  // Debounce: pending emits per file path
-  private throttleMs = 50;
+  private pendingEmits: Map<string, ReturnType<typeof setTimeout>> = new Map();
-  private pendingWrites: Map<string, ReturnType<typeof setTimeout>> = new Map();
 
   public readonly events$ = new smartrx.rxjs.Subject<IWatchEvent>();
 
   constructor(private options: IWatcherOptions) {}
 
+  /**
+   * Check if a file is a temporary file created by editors
+   */
+  private isTemporaryFile(filePath: string): boolean {
+    const basename = filePath.split('/').pop() || '';
+    // Editor temp files: *.tmp.*, *.swp, *.swx, *~, .#*
+    if (basename.includes('.tmp.')) return true;
+    if (basename.endsWith('.swp') || basename.endsWith('.swx')) return true;
+    if (basename.endsWith('~')) return true;
+    if (basename.startsWith('.#')) return true;
+    return false;
+  }
+
   get isWatching(): boolean {
     return this._isWatching;
   }
@@ -84,8 +96,6 @@ export class DenoWatcher implements IWatcher {
     }
 
     try {
-      this.abortController = new AbortController();
-
       // Start watching all base paths
       this.watcher = Deno.watchFs(this.options.basePaths, { recursive: true });
       this._isWatching = true;
@@ -109,11 +119,11 @@ export class DenoWatcher implements IWatcher {
   async stop(): Promise<void> {
     this._isWatching = false;
 
-    // Cancel all pending write stabilizations
+    // Cancel all pending debounced emits
-    for (const timeout of this.pendingWrites.values()) {
+    for (const timeout of this.pendingEmits.values()) {
       clearTimeout(timeout);
     }
-    this.pendingWrites.clear();
+    this.pendingEmits.clear();
 
     // Close the watcher
     if (this.watcher) {
@@ -122,7 +132,6 @@ export class DenoWatcher implements IWatcher {
     }
 
     this.watchedFiles.clear();
-    this.recentEvents.clear();
   }
 
   /**
@@ -140,7 +149,7 @@ export class DenoWatcher implements IWatcher {
         }
 
         for (const filePath of event.paths) {
-          await this.handleDenoEvent(event.kind, filePath);
+          this.handleDenoEvent(event.kind, filePath);
         }
       }
     } catch (error: any) {
@@ -151,46 +160,56 @@ export class DenoWatcher implements IWatcher {
   }
 
   /**
-   * Handle a Deno file system event
+   * Handle a Deno file system event - debounce and normalize
    */
-  private async handleDenoEvent(
+  private handleDenoEvent(
     kind: 'create' | 'modify' | 'remove' | 'access' | 'any' | 'other',
     filePath: string
-  ): Promise<void> {
+  ): void {
     // Ignore 'access' events (just reading the file)
     if (kind === 'access') {
       return;
     }
 
-    // Throttle duplicate events
+    // Skip temporary files created by editors (atomic saves)
-    if (!this.shouldEmit(filePath, kind)) {
+    if (this.isTemporaryFile(filePath)) {
       return;
     }
 
+    // Debounce: cancel any pending emit for this file
+    const existing = this.pendingEmits.get(filePath);
+    if (existing) {
+      clearTimeout(existing);
+    }
+
+    // Schedule debounced emit
+    const timeout = setTimeout(() => {
+      this.pendingEmits.delete(filePath);
+      this.emitFileEvent(filePath, kind);
+    }, this.options.debounceMs);
+
+    this.pendingEmits.set(filePath, timeout);
+  }
+
+  /**
+   * Emit the actual file event after debounce
+   */
+  private async emitFileEvent(
+    filePath: string,
+    kind: 'create' | 'modify' | 'remove' | 'access' | 'any' | 'other'
+  ): Promise<void> {
     try {
       if (kind === 'create') {
         const stats = await this.statSafe(filePath);
         if (stats) {
-          // Wait for write to stabilize
+          this.watchedFiles.add(filePath);
-          await this.waitForWriteFinish(filePath);
+          const eventType: TWatchEventType = stats.isDirectory() ? 'addDir' : 'add';
-          const finalStats = await this.statSafe(filePath);
+          this.events$.next({ type: eventType, path: filePath, stats });
-
-          if (finalStats) {
-            this.watchedFiles.add(filePath);
-            const eventType: TWatchEventType = finalStats.isDirectory() ? 'addDir' : 'add';
-            this.events$.next({ type: eventType, path: filePath, stats: finalStats });
-          }
         }
       } else if (kind === 'modify') {
         const stats = await this.statSafe(filePath);
         if (stats && !stats.isDirectory()) {
-          // Wait for write to stabilize
+          this.events$.next({ type: 'change', path: filePath, stats });
-          await this.waitForWriteFinish(filePath);
-          const finalStats = await this.statSafe(filePath);
-
-          if (finalStats) {
-            this.events$.next({ type: 'change', path: filePath, stats: finalStats });
-          }
         }
       } else if (kind === 'remove') {
         const wasDirectory = this.isKnownDirectory(filePath);
@@ -205,43 +224,6 @@ export class DenoWatcher implements IWatcher {
     }
   }
 
-  /**
-   * Wait for file write to complete (polling-based)
-   */
-  private async waitForWriteFinish(filePath: string): Promise<void> {
-    return new Promise((resolve) => {
-      let lastSize = -1;
-      let lastChange = Date.now();
-
-      const poll = async () => {
-        try {
-          const stats = await this.statSafe(filePath);
-          if (!stats) {
-            resolve();
-            return;
-          }
-
-          const now = Date.now();
-          if (stats.size !== lastSize) {
-            lastSize = stats.size;
-            lastChange = now;
-            this.pendingWrites.set(filePath, setTimeout(poll, this.options.pollInterval));
-          } else if (now - lastChange >= this.options.stabilityThreshold) {
-            this.pendingWrites.delete(filePath);
-            resolve();
-          } else {
-            this.pendingWrites.set(filePath, setTimeout(poll, this.options.pollInterval));
-          }
-        } catch {
-          this.pendingWrites.delete(filePath);
-          resolve();
-        }
-      };
-
-      this.pendingWrites.set(filePath, setTimeout(poll, this.options.pollInterval));
-    });
-  }
-
   /**
    * Scan directory and emit 'add' events for existing files
    */
@@ -253,6 +235,12 @@ export class DenoWatcher implements IWatcher {
     try {
       for await (const entry of Deno.readDir(dirPath)) {
         const fullPath = `${dirPath}/${entry.name}`;
+
+        // Skip temp files during initial scan too
+        if (this.isTemporaryFile(fullPath)) {
+          continue;
+        }
+
         const stats = await this.statSafe(fullPath);
 
         if (!stats) {
@@ -299,31 +287,4 @@ export class DenoWatcher implements IWatcher {
     }
     return false;
   }
-
-  /**
-   * Throttle duplicate events
-   */
-  private shouldEmit(filePath: string, eventType: string): boolean {
-    const key = `${filePath}:${eventType}`;
-    const now = Date.now();
-    const lastEmit = this.recentEvents.get(key);
-
-    if (lastEmit && now - lastEmit < this.throttleMs) {
-      return false;
-    }
-
-    this.recentEvents.set(key, now);
-
-    // Clean up old entries periodically
-    if (this.recentEvents.size > 1000) {
-      const cutoff = now - this.throttleMs * 2;
-      for (const [k, time] of this.recentEvents) {
-        if (time < cutoff) {
-          this.recentEvents.delete(k);
-        }
-      }
-    }
-
-    return true;
-  }
 }