2.4.8

changelog.md

@@ -1,5 +1,23 @@
 # Changelog
 
+## 2025-03-25 - 2.4.8 - fix(installer)
+Improve Git dependency handling and repository cloning in install.sh
+
+- Add explicit check for git installation and prompt the user interactively if git is missing.
+- Auto-install git when '-y' flag is provided in non-interactive mode.
+- Ensure proper cloning of the repository when running the installer outside the repo.
+
+## 2025-03-25 - 2.4.7 - fix(readme)
+Update installation instructions to combine download and execution into a single command for clarity
+
+- Method 1 now uses a unified one-line command to download and run the install script
+
+## 2025-03-25 - 2.4.6 - fix(installer)
+Improve installation instructions for interactive and non-interactive setups
+
+- Changed install.sh to require explicit download of the install script and updated error messages for non-interactive modes
+- Updated readme.md to include three distinct installation methods with clear command examples
+
 ## 2025-03-25 - 2.4.5 - fix(install)
 Improve interactive terminal detection and update installation instructions
 

install.sh

@@ -74,9 +74,11 @@ if [ ! -t 0 ] || [ ! -t 1 ]; then
     if [ $INTERACTIVE -eq 0 ]; then
       echo "ERROR: No controlling terminal available for interactive prompts."
       echo "For interactive installation (RECOMMENDED):"
-      echo "  sudo bash <(curl -sSL https://code.foss.global/serve.zone/nupst/raw/branch/main/install.sh)"
+      echo "  curl -sSL https://code.foss.global/serve.zone/nupst/raw/branch/main/install.sh -o nupst-install.sh"
+      echo "  sudo bash nupst-install.sh"
+      echo ""
       echo "For non-interactive installation with automatic dependency installation:"
-      echo "  sudo bash <(curl -sSL https://code.foss.global/serve.zone/nupst/raw/branch/main/install.sh) -y"
+      echo "  curl -sSL https://code.foss.global/serve.zone/nupst/raw/branch/main/install.sh | sudo bash -s -- -y"
       exit 1
     else
       echo "Interactive terminal found, continuing with prompts..."
@@ -160,37 +162,37 @@ install_git() {
 INSTALL_DIR="/opt/nupst"
 REPO_URL="https://code.foss.global/serve.zone/nupst.git"
 
-if [ $PIPED -eq 1 ]; then
-  echo "Installing NUPST from remote repository..."
+# Check if git is installed - needed for both piped and direct execution
+if ! command -v git &> /dev/null; then
+  echo "Git is required but not installed."
   
-  # Check if git is installed
-  if ! command -v git &> /dev/null; then
-    echo "Git is required but not installed."
+  if [ $AUTO_YES -eq 1 ]; then
+    echo "Auto-installing git (-y flag provided)..."
+    install_git
+  elif [ $INTERACTIVE -eq 1 ]; then
+    # If interactive and no -y flag, ask the user
+    echo "Would you like to install git now? (y/N): "
+    read -r install_git_prompt
     
-    if [ $AUTO_YES -eq 1 ]; then
-      echo "Auto-installing git (-y flag provided)..."
+    if [[ "$install_git_prompt" =~ ^[Yy]$ ]]; then
       install_git
-    elif [ $INTERACTIVE -eq 1 ]; then
-      # If interactive and no -y flag, ask the user
-      echo "Would you like to install git now? (y/N): "
-      read -r install_git_prompt
-      
-      if [[ "$install_git_prompt" =~ ^[Yy]$ ]]; then
-        install_git
-      else
-        echo "Git installation skipped. Please install git manually and run the installer again."
-        echo "Alternatively, you can run the installer with -y flag to automatically install git:"
-        echo "  sudo bash install.sh -y"
-        exit 1
-      fi
     else
-      # Non-interactive mode without -y flag
-      echo "Error: Git is required but not installed."
-      echo "In non-interactive mode, use -y flag to auto-install dependencies:"
-      echo "  curl -sSL https://code.foss.global/serve.zone/nupst/raw/branch/main/install.sh | sudo bash -s -- -y"
+      echo "Git installation skipped. Please install git manually and run the installer again."
+      echo "Alternatively, you can run the installer with -y flag to automatically install git:"
+      echo "  sudo bash install.sh -y"
       exit 1
     fi
+  else
+    # Non-interactive mode without -y flag
+    echo "Error: Git is required but not installed."
+    echo "In non-interactive mode, use -y flag to auto-install dependencies:"
+    echo "  curl -sSL https://code.foss.global/serve.zone/nupst/raw/branch/main/install.sh | sudo bash -s -- -y"
+    exit 1
   fi
+fi
+
+if [ $PIPED -eq 1 ]; then
+  echo "Installing NUPST from remote repository..."
   
   # Check if installation directory exists
   if [ -d "$INSTALL_DIR" ] && [ -d "$INSTALL_DIR/.git" ]; then
@@ -233,12 +235,47 @@ if [ $PIPED -eq 1 ]; then
   # Set script directory to the cloned repo
   SCRIPT_DIR="$INSTALL_DIR"
 else
-  # Running directly from within the repo
+  # Running directly from within the repo or downloaded script
   SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )"
+  
+  # When running from a downloaded script in a different location 
+  # we need to clone the repository first
+  if [ ! -f "$SCRIPT_DIR/setup.sh" ]; then
+    echo "Running installer from downloaded script outside repository."
+    echo "Will clone the repository to $INSTALL_DIR..."
+    
+    # Create installation directory if needed
+    if [ -d "$INSTALL_DIR" ]; then
+      echo "Removing previous installation at $INSTALL_DIR..."
+      rm -rf "$INSTALL_DIR"
+    fi
+    
+    mkdir -p "$INSTALL_DIR"
+    
+    # Clone the repository
+    echo "Cloning NUPST repository to $INSTALL_DIR..."
+    git clone --depth 1 $REPO_URL "$INSTALL_DIR"
+    
+    if [ $? -ne 0 ]; then
+      echo "Failed to clone repository. Please check your internet connection."
+      exit 1
+    fi
+    
+    # Update script directory to use the cloned repo
+    SCRIPT_DIR="$INSTALL_DIR"
+  fi
 fi
 
 # Run setup script
 echo "Running setup script..."
+if [ ! -f "$SCRIPT_DIR/setup.sh" ]; then
+  echo "ERROR: Setup script not found at $SCRIPT_DIR/setup.sh"
+  echo "Current directory: $(pwd)"
+  echo "Script directory: $SCRIPT_DIR"
+  ls -la "$SCRIPT_DIR"
+  exit 1
+fi
+
 bash "$SCRIPT_DIR/setup.sh"
 
 # Install globally

package.json

@@ -1,6 +1,6 @@
 {
   "name": "@serve.zone/nupst",
-  "version": "2.4.5",
+  "version": "2.4.8",
   "description": "Node.js UPS Shutdown Tool for SNMP-enabled UPS devices",
   "main": "dist/index.js",
   "bin": {

readme.md

@@ -19,18 +19,21 @@ NUPST is a command-line tool that monitors SNMP-enabled UPS devices and initiate
 ### Quick Install (One-line command)
 
 ```bash
-# RECOMMENDED: Install interactively using process substitution (requires root privileges)
-# This ensures proper interactive prompts for dependencies
-sudo bash <(curl -sSL https://code.foss.global/serve.zone/nupst/raw/branch/main/install.sh)
+# Method 1: Download and run (most reliable across all environments)
+curl -sSL https://code.foss.global/serve.zone/nupst/raw/branch/main/install.sh -o nupst-install.sh && sudo bash nupst-install.sh && rm nupst-install.sh
+```
 
-# Alternative: Install with auto-yes for dependencies (will install git automatically if needed)
-# Use this for automated/non-interactive installations
-sudo bash <(curl -sSL https://code.foss.global/serve.zone/nupst/raw/branch/main/install.sh) -y
-
-# For systems where process substitution is not available (e.g., some older shells)
+```bash
+# Method 2: Pipe with automatic yes for dependencies (non-interactive)
 curl -sSL https://code.foss.global/serve.zone/nupst/raw/branch/main/install.sh | sudo bash -s -- -y
 ```
 
+```bash
+# Method 3: Process substitution (only on systems that support /dev/fd/)
+# Note: This may fail on some systems with "No such file or directory" errors
+sudo bash <(curl -sSL https://code.foss.global/serve.zone/nupst/raw/branch/main/install.sh)
+```
+
 ### Direct from Git
 
 ```bash

ts/00_commitinfo_data.ts

@@ -3,6 +3,6 @@
  */
 export const commitinfo = {
   name: '@serve.zone/nupst',
-  version: '2.4.5',
+  version: '2.4.8',
   description: 'Node.js UPS Shutdown Tool for SNMP-enabled UPS devices'
 }