2.6.4

changelog.md

@@ -1,5 +1,42 @@
 # Changelog
 
+## 2025-03-26 - 2.6.4 - fix(setup)
+Improve installation process in setup script by cleaning up package files and ensuring a minimal net-snmp dependency installation.
+
+- Remove existing package-lock.json along with node_modules to prevent stale artifacts.
+- Back up the original package.json before modifying it.
+- Create a minimal package.json with only the net-snmp dependency based on the backed-up version.
+- Use a clean install to guarantee that only net-snmp is installed.
+- Restore the original package.json if the installation fails.
+
+## 2025-03-26 - 2.6.3 - fix(setup)
+Update setup script to install only net-snmp dependency and create a minimal package-lock.json for better dependency control.
+
+- Removed full production dependency install in favor of installing only net-snmp@3.20.0
+- Added verification step to confirm net-snmp installation
+- Generate a minimal package-lock.json if one does not exist
+
+## 2025-03-26 - 2.6.2 - fix(setup/readme)
+Improve force update instructions and dependency installation process in setup.sh and readme.md
+
+- Clarify force update commands with explicit paths in readme.md
+- Remove existing node_modules before installing dependencies in setup.sh
+- Switch from 'npm ci --only=production' to 'npm install --omit=dev' with updated error instructions
+
+## 2025-03-26 - 2.6.1 - fix(setup)
+Update setup.sh to temporarily add vendor Node.js binary to PATH for dependency installation, log Node and npm versions, and restore the original PATH afterwards.
+
+- Temporarily prepend vendor Node.js binary directory to PATH to ensure proper npm execution.
+- Log Node.js and npm versions for debugging purposes.
+- Restore the original PATH after installing dependencies.
+
+## 2025-03-26 - 2.6.0 - feat(setup)
+Add --force update flag to setup script and update installation instructions
+
+- Implemented --force option in setup.sh to force-update Node.js binary and dependencies
+- Updated readme.md to document the --force flag and revised update steps
+- Modified ts/cli.ts update command to pass the --force flag to setup.sh
+
 ## 2025-03-26 - 2.5.2 - fix(installer)
 Improve Node.js binary detection, dependency management, and SNMPv3 fallback logic
 

package.json

@@ -1,6 +1,6 @@
 {
   "name": "@serve.zone/nupst",
-  "version": "2.5.2",
+  "version": "2.6.4",
   "description": "Node.js UPS Shutdown Tool for SNMP-enabled UPS devices",
   "main": "dist/index.js",
   "bin": {

readme.md

@@ -227,8 +227,19 @@ sudo nupst update
 This will:
 1. Pull the latest changes from the git repository
 2. Run the installation scripts
-3. Refresh the systemd service configuration
-4. Restart the service if it was running
+3. Force-update Node.js and all dependencies, even if they already exist
+4. Refresh the systemd service configuration
+5. Restart the service if it was running
+
+You can also manually run the setup script with the force flag to update Node.js and dependencies without updating the application code:
+
+```bash
+# If you're in the nupst directory:
+bash ./setup.sh --force
+
+# If you're in another directory, specify the full path:
+bash /opt/nupst/setup.sh --force
+```
 
 ## Security
 

setup.sh

@@ -2,6 +2,22 @@
 
 # NUPST Setup Script
 # Downloads the appropriate Node.js binary for the current platform
+# and installs production dependencies
+
+# Parse command line arguments
+FORCE_UPDATE=0
+
+for arg in "$@"; do
+  case $arg in
+    --force|-f)
+      FORCE_UPDATE=1
+      shift
+      ;;
+    *)
+      # Unknown option
+      ;;
+  esac
+done
 
 # Find the directory where this script is located
 SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )"
@@ -74,8 +90,9 @@ case "$OS" in
 esac
 
 # Check if we already have the Node.js binary
-if [ -f "$SCRIPT_DIR/vendor/$NODE_DIR/bin/node" ]; then
+if [ -f "$SCRIPT_DIR/vendor/$NODE_DIR/bin/node" ] && [ $FORCE_UPDATE -eq 0 ]; then
   echo "Node.js binary already exists for $OS-$ARCH. Skipping download."
+  echo "Use --force or -f to force update Node.js."
 else
   echo "Downloading Node.js v$NODE_VERSION for $OS-$ARCH..."
   
@@ -222,25 +239,71 @@ echo "dist_ts directory successfully downloaded from npm registry."
 # Make launcher script executable
 chmod +x "$SCRIPT_DIR/bin/nupst"
 
-# Install production dependencies
-echo "Installing production dependencies..."
-"$SCRIPT_DIR/vendor/$NODE_DIR/bin/npm" --prefix "$SCRIPT_DIR" ci --only=production --no-audit --no-fund
+# Add our Node.js bin directory to the PATH temporarily
+NODE_BIN_DIR="$SCRIPT_DIR/vendor/$NODE_DIR/bin"
+OLD_PATH="$PATH"
+export PATH="$NODE_BIN_DIR:$PATH"
 
-if [ $? -ne 0 ]; then
-  echo "Warning: Failed to install dependencies with 'npm ci'. Trying 'npm install'..."
-  "$SCRIPT_DIR/vendor/$NODE_DIR/bin/npm" --prefix "$SCRIPT_DIR" install --only=production --no-audit --no-fund
-  
-  if [ $? -ne 0 ]; then
-    echo "Error: Failed to install dependencies. NUPST may not function correctly."
-    echo "You can try to install dependencies manually by running:"
-    echo "cd $SCRIPT_DIR && npm install --only=production"
-  else
-    echo "Dependencies installed successfully with 'npm install'."
-  fi
-else
-  echo "Dependencies installed successfully with 'npm ci'."
+# Remove existing node_modules directory and package files
+echo "Cleaning up existing installation..."
+rm -rf "$SCRIPT_DIR/node_modules"
+rm -f "$SCRIPT_DIR/package-lock.json"
+
+# Back up existing package.json if it exists
+if [ -f "$SCRIPT_DIR/package.json" ]; then
+  echo "Backing up existing package.json..."
+  cp "$SCRIPT_DIR/package.json" "$SCRIPT_DIR/package.json.bak"
 fi
 
+# Create a clean minimal package.json with ONLY net-snmp dependency
+echo "Creating minimal package.json with only net-snmp dependency..."
+VERSION=$(grep -o '"version": "[^"]*"' "$SCRIPT_DIR/package.json.bak" | head -1 | cut -d'"' -f4 || echo "2.6.3")
+echo '{
+  "name": "@serve.zone/nupst",
+  "version": "'$VERSION'",
+  "description": "Node.js UPS Shutdown Tool for SNMP-enabled UPS devices",
+  "main": "dist_ts/index.js",
+  "type": "module",
+  "bin": {
+    "nupst": "bin/nupst"
+  },
+  "dependencies": {
+    "net-snmp": "3.20.0"
+  },
+  "engines": {
+    "node": ">=16.0.0"
+  },
+  "private": true
+}' > "$SCRIPT_DIR/package.json"
+
+# Install ONLY net-snmp
+echo "Installing ONLY net-snmp dependency..."
+echo "Using Node.js binary from: $NODE_BIN_DIR"
+echo "Node version: $(node --version)"
+echo "NPM version: $(npm --version)"
+
+# Use clean install to ensure only net-snmp is installed
+npm --prefix "$SCRIPT_DIR" install --no-audit --no-fund
+
+INSTALL_STATUS=$?
+if [ $INSTALL_STATUS -ne 0 ]; then
+  echo "Error: Failed to install net-snmp dependency. NUPST may not function correctly."
+  echo "Restoring original package.json..."
+  mv "$SCRIPT_DIR/package.json.bak" "$SCRIPT_DIR/package.json"
+  exit 1
+else
+  echo "net-snmp dependency installed successfully."
+  # Show what's actually installed
+  echo "Installed modules:"
+  find "$SCRIPT_DIR/node_modules" -maxdepth 1 -type d | grep -v "^$SCRIPT_DIR/node_modules$" | sort
+  
+  # Remove backup if successful
+  rm -f "$SCRIPT_DIR/package.json.bak"
+fi
+
+# Restore the original PATH
+export PATH="$OLD_PATH"
+
 echo "NUPST setup completed successfully."
 echo "You can now run NUPST using: $SCRIPT_DIR/bin/nupst"
 echo "To install NUPST globally, run: sudo ln -s $SCRIPT_DIR/bin/nupst /usr/local/bin/nupst"

ts/00_commitinfo_data.ts

@@ -3,6 +3,6 @@
  */
 export const commitinfo = {
   name: '@serve.zone/nupst',
-  version: '2.5.2',
+  version: '2.6.4',
   description: 'Node.js UPS Shutdown Tool for SNMP-enabled UPS devices'
 }

ts/cli.ts

@@ -418,9 +418,9 @@ Options:
         console.log('│ Running install.sh to update NUPST...');
         execSync(`cd ${installDir} && bash ./install.sh`, { stdio: 'pipe' });
         
-        // 3. Run the setup.sh script 
-        console.log('│ Running setup.sh to update dependencies...');
-        execSync(`cd ${installDir} && bash ./setup.sh`, { stdio: 'pipe' });
+        // 3. Run the setup.sh script with force flag to update Node.js and dependencies
+        console.log('│ Running setup.sh to update Node.js and dependencies...');
+        execSync(`cd ${installDir} && bash ./setup.sh --force`, { stdio: 'pipe' });
         
         // 4. Refresh the systemd service
         console.log('│ Refreshing systemd service...');