v4.10.0

feat(core,edge,hub,transport): add QUIC tunnel transport support with optional edge transport selection
v4.9.1
2026-03-19 10:44:22 +00:00 · 2026-03-19 10:44:22 +00:00 · 2026-03-18 00:30:03 +00:00 · 2026-03-18 00:30:03 +00:00 · 2026-03-18 00:13:14 +00:00 · 2026-03-18 00:13:14 +00:00
19 changed files with 4635 additions and 586 deletions
--- a/changelog.md
+++ b/changelog.md
@@ -1,5 +1,217 @@
 # Changelog

+## 2026-03-19 - 4.10.0 - feat(core,edge,hub,transport)
+add QUIC tunnel transport support with optional edge transport selection
+
+- adds a shared transport module with QUIC configuration helpers, control message framing, and PROXY header handling
+- enables the hub to accept QUIC connections on the tunnel port alongside existing TCP/TLS support
+- adds edge transportMode configuration with quic and quicWithFallback options and propagates it through restarts
+- includes end-to-end QUIC transport tests covering large payloads and concurrent streams
+
+## 2026-03-18 - 4.9.1 - fix(readme)
+document QoS tiers, heartbeat frames, and adaptive flow control in the protocol overview
+
+- Adds PING, PONG, WINDOW_UPDATE, and WINDOW_UPDATE_BACK frame types to the protocol documentation
+- Describes the 3-tier priority queues for control, normal data, and sustained traffic
+- Explains sustained stream classification and adaptive per-stream window sizing
+
+## 2026-03-18 - 4.9.0 - feat(protocol)
+add sustained-stream tunnel scheduling to isolate high-throughput traffic
+
+- Introduce a third low-priority sustained queue in TunnelIo with a forced drain budget to prevent long-lived high-bandwidth streams from starving control and normal data frames.
+- Classify upload and download streams as sustained after exceeding the throughput threshold for the minimum duration, and route their DATA and CLOSE frames through the sustained channel.
+- Wire the new sustained channel through edge and hub stream handling so sustained traffic is scheduled consistently on both sides of the tunnel.
+
+## 2026-03-18 - 4.8.19 - fix(remoteingress-protocol)
+reduce per-stream flow control windows and increase control channel buffering
+
+- Lower the initial and maximum per-stream window from 16MB to 4MB and scale adaptive windows against a 200MB total budget with a 1MB minimum.
+- Increase edge and hub control frame channel capacity from 256 to 512 to better handle prioritized control traffic.
+- Update flow-control tests and comments to reflect the new window sizing and budget behavior.
+
+## 2026-03-17 - 4.8.18 - fix(rust-protocol)
+switch tunnel frame buffers from Vec<u8> to Bytes to reduce copying and memory overhead
+
+- Add the bytes crate to core and protocol crates
+- Update frame encoding, reader payloads, channel queues, and stream backchannels to use Bytes
+- Adjust edge and hub data/control paths to send framed payloads as Bytes
+
+## 2026-03-17 - 4.8.17 - fix(protocol)
+increase per-stream flow control windows and remove adaptive read caps
+
+- Raise the initial per-stream window from 4MB to 16MB and expand the adaptive window budget to 800MB with a 4MB floor
+- Stop limiting edge and hub reads by the adaptive per-stream target window, keeping reads capped only by the current window and 32KB chunk size
+- Update protocol tests to match the new adaptive window scaling and budget boundaries
+
+## 2026-03-17 - 4.8.16 - fix(release)
+bump package version to 4.8.15
+
+- Updates the package.json version field from 4.8.13 to 4.8.15.
+
+## 2026-03-17 - 4.8.13 - fix(remoteingress-protocol)
+require a flush after each written frame to bound TLS buffer growth
+
+- Remove the unflushed byte threshold and stop queueing additional writes while a flush is pending
+- Simplify write and flush error logging after dropping unflushed byte tracking
+- Update tunnel I/O comments to reflect the stricter flush behavior that avoids OOM and connection resets
+
+## 2026-03-17 - 4.8.12 - fix(tunnel)
+prevent tunnel backpressure buffering from exhausting memory and cancel stream handlers before TLS shutdown
+
+- stop self-waking and writing new frames while a flush is pending to avoid unbounded TLS session buffer growth under load
+- reorder edge and hub shutdown cleanup so stream cancellation happens before TLS close_notify, preventing handlers from blocking on dead channels
+- add load tests covering sustained large transfers, burst traffic, and rapid stream churn to verify tunnel stability
+
+## 2026-03-17 - 4.8.11 - fix(remoteingress-core)
+stop data frame send loops promptly when stream cancellation is triggered
+
+- Use cancellation-aware tokio::select! around data channel sends in both edge and hub stream forwarding paths
+- Prevent stalled or noisy shutdown behavior when stream or client cancellation happens while awaiting frame delivery
+
+## 2026-03-17 - 4.8.10 - fix(remoteingress-core)
+guard tunnel frame sends with cancellation to prevent async send deadlocks
+
+- Wrap OPEN, CLOSE, CLOSE_BACK, WINDOW_UPDATE, and cleanup channel sends in cancellation-aware tokio::select! blocks.
+- Avoid indefinite blocking when tunnel, stream, or writer tasks are cancelled while awaiting channel capacity.
+- Improve shutdown reliability for edge and hub stream handling under tunnel failure conditions.
+
+## 2026-03-17 - 4.8.9 - fix(repo)
+no changes to commit
+
+
+## 2026-03-17 - 4.8.8 - fix(remoteingress-core)
+cancel stale edge connections when an edge reconnects
+
+- Remove any existing edge entry before registering a reconnected edge
+- Trigger the previous connection's cancellation token so stale sessions shut down immediately instead of waiting for TCP keepalive
+
+## 2026-03-17 - 4.8.7 - fix(remoteingress-core)
+perform graceful TLS shutdown on edge and hub tunnel streams
+
+- Send TLS close_notify before cleanup to avoid peer disconnect warnings on both tunnel endpoints
+- Wrap stream shutdown in a 2 second timeout so connection teardown does not block cleanup
+
+## 2026-03-17 - 4.8.6 - fix(remoteingress-core)
+initialize disconnect reason only when set in hub loop break paths
+
+- Replace the default "unknown" disconnect reason with an explicitly assigned string and document that all hub loop exits set it before use
+- Add an allow attribute for unused assignments to avoid warnings around the deferred initialization pattern
+
+## 2026-03-17 - 4.8.5 - fix(repo)
+no changes to commit
+
+
+## 2026-03-17 - 4.8.4 - fix(remoteingress-core)
+prevent stream stalls by guaranteeing flow-control updates and avoiding bounded per-stream channel overflows
+
+- Replace bounded per-stream data channels with unbounded channels on edge and hub, relying on existing WINDOW_UPDATE flow control to limit bytes in flight
+- Use awaited sends for FRAME_WINDOW_UPDATE and FRAME_WINDOW_UPDATE_BACK so updates are not dropped and streams do not deadlock under backpressure
+- Clean up stream state when channel receivers have already exited instead of closing active streams because a bounded queue filled
+
+## 2026-03-17 - 4.8.3 - fix(protocol,edge)
+optimize tunnel frame handling and zero-copy uploads in edge I/O
+
+- extract hub frame processing into a shared edge handler to remove duplicated tunnel logic
+- add zero-copy frame header encoding and read payloads directly into framed buffers for client-to-hub uploads
+- refactor TunnelIo read/write state to avoid unsafe queue access and reduce buffer churn with incremental parsing
+
+## 2026-03-17 - 4.8.2 - fix(rust-edge)
+refactor tunnel I/O to preserve TLS state and prioritize control frames
+
+- replace split TLS handling with a single-owner TunnelIo to avoid handshake and buffered read corruption
+- prioritize control frames over data frames to prevent WINDOW_UPDATE starvation and flow-control deadlocks
+- improve tunnel reliability with incremental frame parsing, liveness/error events, and corrupt frame header logging
+
+## 2026-03-17 - 4.8.1 - fix(remoteingress-core)
+remove tunnel writer timeouts from edge and hub buffered writes
+
+- Drops the 30 second timeout wrapper around writer.write_all and writer.flush in both edge and hub tunnel writers.
+- Updates error logging to report write failures without referring to stalled writes.
+
+## 2026-03-17 - 4.8.0 - feat(events)
+include disconnect reasons in edge and hub management events
+
+- Add reason fields to tunnelDisconnected and edgeDisconnected events emitted from the Rust core and binary bridge
+- Propagate specific disconnect causes such as EOF, liveness timeout, writer failure, handshake failure, and hub cancellation
+- Update TypeScript edge and hub classes to log and forward disconnect reason data
+- Extend serialization tests to cover the new reason fields
+
+## 2026-03-17 - 4.7.2 - fix(remoteingress-core)
+add tunnel write timeouts and scale initial stream windows by active stream count
+
+- Wrap tunnel frame writes and flushes in a 30-second timeout on both edge and hub to detect stalled writers and trigger faster reconnect or cleanup.
+- Compute each stream's initial send window from the current active stream count instead of using a fixed window to keep total in-flight data within the 32MB budget.
+
+## 2026-03-17 - 4.7.1 - fix(remoteingress-core)
+improve tunnel failure detection and reconnect handling
+
+- Enable TCP keepalive on edge and hub connections to detect silent network failures sooner
+- Trigger immediate reconnect or disconnect when tunnel writer tasks fail instead of waiting for liveness timeouts
+- Prevent active stream counter underflow during concurrent connection cleanup
+
+## 2026-03-16 - 4.7.0 - feat(edge,protocol,test)
+add configurable edge bind address and expand flow-control test coverage
+
+- adds an optional bindAddress configuration for edge TCP listeners, defaulting to 0.0.0.0 when not provided
+- passes bindAddress through the TypeScript edge client and Rust edge runtime so local test setups can bind to localhost
+- adds protocol unit tests for adaptive stream window sizing and window update frame encoding/decoding
+- introduces end-to-end flow-control tests and updates the test script to build before running tests
+
+## 2026-03-16 - 4.6.1 - fix(remoteingress-core)
+avoid spurious tunnel disconnect events and increase control channel capacity
+
+- Emit TunnelDisconnected only after an established connection is actually lost, preventing false disconnect events during failed reconnect attempts.
+- Increase edge and hub control-channel buffer sizes from 64 to 256 to better prioritize control frames under load.
+
+## 2026-03-16 - 4.6.0 - feat(remoteingress-core)
+add adaptive per-stream flow control based on active stream counts
+
+- Track active stream counts on edge and hub connections to size per-stream flow control windows dynamically.
+- Cap WINDOW_UPDATE increments and read sizes to the adaptive window so bandwidth is shared more evenly across concurrent streams.
+- Apply the adaptive logic to both upload and download paths on edge and hub stream handlers.
+
+## 2026-03-16 - 4.5.12 - fix(remoteingress-core)
+improve tunnel liveness handling and enable TCP keepalive for accepted client sockets
+
+- Avoid disconnecting edges when PING or PONG frames cannot be queued because the control channel is temporarily full.
+- Enable TCP_NODELAY and TCP keepalive on accepted client connections to help detect stale or dropped clients.
+
+## 2026-03-16 - 4.5.11 - fix(repo)
+no changes to commit
+
+
+## 2026-03-16 - 4.5.10 - fix(remoteingress-core)
+guard zero-window reads to avoid false EOF handling on stalled streams
+
+- Prevent upload and download loops from calling read on an empty buffer when flow-control window remains at 0 after stall timeout
+- Log a warning and close the affected stream instead of misinterpreting Ok(0) as end-of-file
+
+## 2026-03-16 - 4.5.9 - fix(remoteingress-core)
+delay stream close until downstream response draining finishes to prevent truncated transfers
+
+- Waits for the hub-to-client download task to finish before sending the stream CLOSE frame
+- Prevents upstream reads from being cancelled mid-response during asymmetric transfers such as git fetch
+- Retains the existing timeout so stalled downloads still clean up safely
+
+## 2026-03-16 - 4.5.8 - fix(remoteingress-core)
+ensure upstream writes cancel promptly and reliably deliver CLOSE_BACK frames
+
+- listen for stream cancellation while waiting on upstream write timeouts so FRAME_CLOSE does not block for up to 60 seconds
+- replace try_send with send().await when emitting CLOSE_BACK frames to avoid silently dropping close notifications when the data channel is full
+
+## 2026-03-16 - 4.5.7 - fix(remoteingress-core)
+improve tunnel reconnect and frame write efficiency
+
+- Reuse the TLS connector across edge reconnections to preserve session resumption state and reduce reconnect latency.
+- Buffer hub and edge frame writes to coalesce small control and data frames into fewer TLS records and syscalls while still flushing each frame promptly.
+
+## 2026-03-16 - 4.5.6 - fix(remoteingress-core)
+disable Nagle's algorithm on edge, hub, and upstream TCP sockets to reduce control-frame latency
+
+- Enable TCP_NODELAY on the edge connection to the hub for faster PING/PONG and WINDOW_UPDATE delivery
+- Apply TCP_NODELAY on accepted hub streams before TLS handling
+- Enable TCP_NODELAY on SmartProxy upstream connections before sending the PROXY header
+
 ## 2026-03-16 - 4.5.5 - fix(remoteingress-core)
 wait for hub-to-client draining before cleanup and reliably send close frames

--- a/package.json
+++ b/package.json
@@ -1,6 +1,6 @@
 {
  "name": "@serve.zone/remoteingress",
-  "version": "4.5.5",
+  "version": "4.10.0",
  "private": false,
  "description": "Edge ingress tunnel for DcRouter - accepts incoming TCP connections at network edge and tunnels them to DcRouter SmartProxy preserving client IP via PROXY protocol v1.",
  "main": "dist_ts/index.js",
@@ -9,7 +9,7 @@
  "author": "Task Venture Capital GmbH",
  "license": "MIT",
  "scripts": {
-    "test": "(tstest test/ --verbose --logfile --timeout 60)",
+    "test": "(pnpm run build && tstest test/ --verbose --logfile --timeout 60)",
    "build": "(tsbuild tsfolders --allowimplicitany && tsrust)",
    "buildDocs": "(tsdoc)"
  },
--- a/readme.md
+++ b/readme.md
@@ -17,7 +17,7 @@ pnpm install @serve.zone/remoteingress
 `@serve.zone/remoteingress` uses a **Hub/Edge** topology with a high-performance Rust core and a TypeScript API surface:

 ```
-┌─────────────────────┐          TLS Tunnel           ┌─────────────────────┐
+┌─────────────────────┐          TLS Tunnel            ┌─────────────────────┐
 │   Network Edge      │  ◄══════════════════════════►  │   Private Cluster   │
 │                     │   (multiplexed frames +        │                     │
 │  RemoteIngressEdge  │    shared-secret auth)         │  RemoteIngressHub   │
@@ -48,6 +48,8 @@ pnpm install @serve.zone/remoteingress
 - 🎛️ **Dynamic port configuration** — the hub assigns listen ports per edge and can hot-reload them at runtime via `FRAME_CONFIG` frames
 - 📣 **Event-driven** — both Hub and Edge extend `EventEmitter` for real-time monitoring
 - ⚡ **Rust core** — all frame encoding, TLS, and TCP proxying happen in native code for maximum throughput
+- 🎚️ **3-tier QoS** — control frames, normal data, and sustained (elephant flow) traffic each get their own priority queue
+- 📊 **Adaptive flow control** — per-stream windows scale with active stream count to prevent memory overuse

 ## 🚀 Usage

@@ -280,6 +282,10 @@ The tunnel uses a custom binary frame protocol over TLS:
 | `DATA_BACK` | `0x04` | Hub → Edge | Response data flowing downstream |
 | `CLOSE_BACK` | `0x05` | Hub → Edge | Upstream (SmartProxy) closed the connection |
 | `CONFIG` | `0x06` | Hub → Edge | Runtime configuration update (e.g. port changes); payload is JSON |
+| `PING` | `0x07` | Hub → Edge | Heartbeat probe (sent every 15s) |
+| `PONG` | `0x08` | Edge → Hub | Heartbeat response |
+| `WINDOW_UPDATE` | `0x09` | Edge → Hub | Per-stream flow control: edge consumed N bytes, hub can send more |
+| `WINDOW_UPDATE_BACK` | `0x0A` | Hub → Edge | Per-stream flow control: hub consumed N bytes, edge can send more |

 Max payload size per frame: **16 MB**. Stream IDs are 32-bit unsigned integers.

@@ -292,6 +298,42 @@ Max payload size per frame: **16 MB**. Stream IDs are 32-bit unsigned integers.
 5. Frame protocol begins — `OPEN`/`DATA`/`CLOSE` frames flow in both directions
 6. Hub can push `CONFIG` frames at any time to update the edge's listen ports

+## 🎚️ QoS & Flow Control
+
+The tunnel multiplexer uses a **3-tier priority system** and **per-stream flow control** to ensure fair bandwidth sharing across thousands of concurrent streams.
+
+### Priority Tiers
+
+All outbound frames are queued into one of three priority levels:
+
+| Tier | Queue | Frames | Behavior |
+|------|-------|--------|----------|
+| 🔴 **Control** (highest) | `ctrl_queue` | PING, PONG, WINDOW_UPDATE, OPEN, CLOSE, CONFIG | Always drained first. Never delayed. |
+| 🟡 **Data** (normal) | `data_queue` | DATA, DATA_BACK from normal streams | Drained when ctrl is empty. Gated at 64 buffered items for backpressure. |
+| 🟢 **Sustained** (lowest) | `sustained_queue` | DATA, DATA_BACK from elephant flows | Drained freely when ctrl+data are empty. Otherwise guaranteed **1 MB/s** via forced drain every second. |
+
+This prevents large bulk transfers (e.g. git clones, file downloads) from starving interactive traffic and ensures `WINDOW_UPDATE` frames are never delayed — which would cause flow control deadlocks.
+
+### Sustained Stream Classification
+
+A stream is automatically classified as **sustained** (elephant flow) when:
+- It has been active for **>10 seconds**, AND
+- Its average throughput exceeds **20 Mbit/s** (2.5 MB/s)
+
+Once classified, the stream's flow control window is locked to the **1 MB floor** and its data frames move to the lowest-priority queue. Classification is one-way — a stream never gets promoted back to normal.
+
+### Adaptive Per-Stream Windows
+
+Each stream has a send window that limits bytes-in-flight. The window size adapts to the number of active streams using a shared **200 MB memory budget**:
+
+| Active Streams | Window per Stream |
+|---|---|
+| 1–50 | 4 MB (maximum) |
+| 51–100 | Scales down (4 MB → 2 MB) |
+| 200+ | 1 MB (floor) |
+
+The consumer sends `WINDOW_UPDATE` frames after processing data, allowing the producer to send more. This prevents any single stream from consuming unbounded memory and provides natural backpressure.
+
 ## 💡 Example Scenarios

 ### 1. Expose a Private Kubernetes Cluster to the Internet
--- a/rust/Cargo.lock
+++ b/rust/Cargo.lock
@@ -95,6 +95,12 @@ version = "2.11.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "843867be96c8daad0d758b57df9392b6d8d271134fce549de6ce169ff98a92af"

+[[package]]
+name = "bumpalo"
+version = "3.20.2"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "5d20789868f4b01b2f2caec9f5c4e0213b41e3e5702a50157d699ae31ced2fcb"
+
 [[package]]
 name = "bytes"
 version = "1.11.1"
@@ -113,12 +119,24 @@ dependencies = [
 "shlex",
 ]

+[[package]]
+name = "cesu8"
+version = "1.1.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "6d43a04d8753f35258c91f8ec639f792891f748a1edbd759cf1dcea3382ad83c"
+
 [[package]]
 name = "cfg-if"
 version = "1.0.4"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "9330f8b2ff13f34540b44e946ef35111825727b38d33286ef986142615121801"

+[[package]]
+name = "cfg_aliases"
+version = "0.2.1"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "613afe47fcd5fac7ccf1db93babcb082c5994d996f20b8b159f2ad1658eb5724"
+
 [[package]]
 name = "clap"
 version = "4.5.58"
@@ -174,6 +192,32 @@ version = "1.0.4"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "b05b61dc5112cbb17e4b6cd61790d9845d13888356391624cbe7e41efeac1e75"

+[[package]]
+name = "combine"
+version = "4.6.7"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "ba5a308b75df32fe02788e748662718f03fde005016435c444eea572398219fd"
+dependencies = [
+ "bytes",
+ "memchr",
+]
+
+[[package]]
+name = "core-foundation"
+version = "0.10.1"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "b2a6cd9ae233e7f62ba4e9353e81a88df7fc8a5987b8d445b4d90c879bd156f6"
+dependencies = [
+ "core-foundation-sys",
+ "libc",
+]
+
+[[package]]
+name = "core-foundation-sys"
+version = "0.8.7"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "773648b94d0e5d620f64f280777445740e61fe701025087ec8b57f45c791888b"
+
 [[package]]
 name = "deranged"
 version = "0.5.6"
@@ -222,6 +266,18 @@ dependencies = [
 "windows-sys 0.61.2",
 ]

+[[package]]
+name = "fastbloom"
+version = "0.14.1"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "4e7f34442dbe69c60fe8eaf58a8cafff81a1f278816d8ab4db255b3bef4ac3c4"
+dependencies = [
+ "getrandom 0.3.4",
+ "libm",
+ "rand",
+ "siphasher",
+]
+
 [[package]]
 name = "find-msvc-tools"
 version = "0.1.9"
@@ -253,8 +309,10 @@ source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "ff2abc00be7fca6ebc474524697ae276ad847ad0a6b3faa4bcb027e9a4614ad0"
 dependencies = [
 "cfg-if",
+ "js-sys",
 "libc",
 "wasi",
+ "wasm-bindgen",
 ]

 [[package]]
@@ -264,9 +322,11 @@ source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "899def5c37c4fd7b2664648c28120ecec138e4d395b459e5ca34f9cce2dd77fd"
 dependencies = [
 "cfg-if",
+ "js-sys",
 "libc",
 "r-efi",
 "wasip2",
+ "wasm-bindgen",
 ]

 [[package]]
@@ -311,6 +371,28 @@ dependencies = [
 "syn",
 ]

+[[package]]
+name = "jni"
+version = "0.21.1"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "1a87aa2bb7d2af34197c04845522473242e1aa17c12f4935d5856491a7fb8c97"
+dependencies = [
+ "cesu8",
+ "cfg-if",
+ "combine",
+ "jni-sys",
+ "log",
+ "thiserror 1.0.69",
+ "walkdir",
+ "windows-sys 0.45.0",
+]
+
+[[package]]
+name = "jni-sys"
+version = "0.3.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "8eaf4bc02d17cbdd7ff4c7438cafcdf7fb9a4613313ad11b4f8fefe7d3fa0130"
+
 [[package]]
 name = "jobserver"
 version = "0.1.34"
@@ -321,12 +403,28 @@ dependencies = [
 "libc",
 ]

+[[package]]
+name = "js-sys"
+version = "0.3.91"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "b49715b7073f385ba4bc528e5747d02e66cb39c6146efb66b781f131f0fb399c"
+dependencies = [
+ "once_cell",
+ "wasm-bindgen",
+]
+
 [[package]]
 name = "libc"
 version = "0.2.182"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "6800badb6cb2082ffd7b6a67e6125bb39f18782f793520caee8cb8846be06112"

+[[package]]
+name = "libm"
+version = "0.2.16"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "b6d2cec3eae94f9f509c767b45932f1ada8350c4bdb85af2fcab4a3c14807981"
+
 [[package]]
 name = "libmimalloc-sys"
 version = "0.1.44"
@@ -352,6 +450,12 @@ version = "0.4.29"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "5e5032e24019045c762d3c0f28f5b6b8bbf38563a65908389bf7978758920897"

+[[package]]
+name = "lru-slab"
+version = "0.1.2"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "112b39cec0b298b6c1999fee3e31427f74f676e4cb9879ed1a121b43661a4154"
+
 [[package]]
 name = "memchr"
 version = "2.8.0"
@@ -396,6 +500,12 @@ version = "1.70.2"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "384b8ab6d37215f3c5301a95a4accb5d64aa607f1fcb26a11b5303878451b4fe"

+[[package]]
+name = "openssl-probe"
+version = "0.2.1"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "7c87def4c32ab89d880effc9e097653c8da5d6ef28e6b539d313baaacfbafcbe"
+
 [[package]]
 name = "parking_lot"
 version = "0.12.5"
@@ -456,6 +566,15 @@ version = "0.2.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "439ee305def115ba05938db6eb1644ff94165c5ab5e9420d1c1bcedbba909391"

+[[package]]
+name = "ppv-lite86"
+version = "0.2.21"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "85eae3c4ed2f50dcfe72643da4befc30deadb458a9b590d720cde2f2b1e97da9"
+dependencies = [
+ "zerocopy",
+]
+
 [[package]]
 name = "proc-macro2"
 version = "1.0.106"
@@ -465,6 +584,63 @@ dependencies = [
 "unicode-ident",
 ]

+[[package]]
+name = "quinn"
+version = "0.11.9"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "b9e20a958963c291dc322d98411f541009df2ced7b5a4f2bd52337638cfccf20"
+dependencies = [
+ "bytes",
+ "cfg_aliases",
+ "pin-project-lite",
+ "quinn-proto",
+ "quinn-udp",
+ "rustc-hash",
+ "rustls",
+ "socket2 0.6.2",
+ "thiserror 2.0.18",
+ "tokio",
+ "tracing",
+ "web-time",
+]
+
+[[package]]
+name = "quinn-proto"
+version = "0.11.14"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "434b42fec591c96ef50e21e886936e66d3cc3f737104fdb9b737c40ffb94c098"
+dependencies = [
+ "bytes",
+ "fastbloom",
+ "getrandom 0.3.4",
+ "lru-slab",
+ "rand",
+ "ring",
+ "rustc-hash",
+ "rustls",
+ "rustls-pki-types",
+ "rustls-platform-verifier",
+ "slab",
+ "thiserror 2.0.18",
+ "tinyvec",
+ "tracing",
+ "web-time",
+]
+
+[[package]]
+name = "quinn-udp"
+version = "0.5.14"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "addec6a0dcad8a8d96a771f815f0eaf55f9d1805756410b39f5fa81332574cbd"
+dependencies = [
+ "cfg_aliases",
+ "libc",
+ "once_cell",
+ "socket2 0.6.2",
+ "tracing",
+ "windows-sys 0.60.2",
+]
+
 [[package]]
 name = "quote"
 version = "1.0.44"
@@ -480,6 +656,35 @@ version = "5.3.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "69cdb34c158ceb288df11e18b4bd39de994f6657d83847bdffdbd7f346754b0f"

+[[package]]
+name = "rand"
+version = "0.9.2"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "6db2770f06117d490610c7488547d543617b21bfa07796d7a12f6f1bd53850d1"
+dependencies = [
+ "rand_chacha",
+ "rand_core",
+]
+
+[[package]]
+name = "rand_chacha"
+version = "0.9.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "d3022b5f1df60f26e1ffddd6c66e8aa15de382ae63b3a0c1bfc0e4d3e3f325cb"
+dependencies = [
+ "ppv-lite86",
+ "rand_core",
+]
+
+[[package]]
+name = "rand_core"
+version = "0.9.5"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "76afc826de14238e6e8c374ddcc1fa19e374fd8dd986b0d2af0d02377261d83c"
+dependencies = [
+ "getrandom 0.3.4",
+]
+
 [[package]]
 name = "rcgen"
 version = "0.13.2"
@@ -551,13 +756,16 @@ dependencies = [
 name = "remoteingress-core"
 version = "2.0.0"
 dependencies = [
+ "bytes",
 "log",
+ "quinn",
 "rcgen",
 "remoteingress-protocol",
 "rustls",
 "rustls-pemfile",
 "serde",
 "serde_json",
+ "socket2 0.5.10",
 "tokio",
 "tokio-rustls",
 "tokio-util",
@@ -567,7 +775,10 @@ dependencies = [
 name = "remoteingress-protocol"
 version = "2.0.0"
 dependencies = [
+ "bytes",
+ "log",
 "tokio",
+ "tokio-util",
 ]

 [[package]]
@@ -584,6 +795,12 @@ dependencies = [
 "windows-sys 0.52.0",
 ]

+[[package]]
+name = "rustc-hash"
+version = "2.1.1"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "357703d41365b4b27c590e3ed91eabb1b663f07c4c084095e60cbed4362dff0d"
+
 [[package]]
 name = "rustls"
 version = "0.23.36"
@@ -600,6 +817,18 @@ dependencies = [
 "zeroize",
 ]

+[[package]]
+name = "rustls-native-certs"
+version = "0.8.3"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "612460d5f7bea540c490b2b6395d8e34a953e52b491accd6c86c8164c5932a63"
+dependencies = [
+ "openssl-probe",
+ "rustls-pki-types",
+ "schannel",
+ "security-framework",
+]
+
 [[package]]
 name = "rustls-pemfile"
 version = "2.2.0"
@@ -615,9 +844,37 @@ version = "1.14.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "be040f8b0a225e40375822a563fa9524378b9d63112f53e19ffff34df5d33fdd"
 dependencies = [
+ "web-time",
 "zeroize",
 ]

+[[package]]
+name = "rustls-platform-verifier"
+version = "0.6.2"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "1d99feebc72bae7ab76ba994bb5e121b8d83d910ca40b36e0921f53becc41784"
+dependencies = [
+ "core-foundation",
+ "core-foundation-sys",
+ "jni",
+ "log",
+ "once_cell",
+ "rustls",
+ "rustls-native-certs",
+ "rustls-platform-verifier-android",
+ "rustls-webpki",
+ "security-framework",
+ "security-framework-sys",
+ "webpki-root-certs",
+ "windows-sys 0.61.2",
+]
+
+[[package]]
+name = "rustls-platform-verifier-android"
+version = "0.1.1"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "f87165f0995f63a9fbeea62b64d10b4d9d8e78ec6d7d51fb2125fda7bb36788f"
+
 [[package]]
 name = "rustls-webpki"
 version = "0.103.9"
@@ -630,12 +887,59 @@ dependencies = [
 "untrusted",
 ]

+[[package]]
+name = "rustversion"
+version = "1.0.22"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "b39cdef0fa800fc44525c84ccb54a029961a8215f9619753635a9c0d2538d46d"
+
+[[package]]
+name = "same-file"
+version = "1.0.6"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "93fc1dc3aaa9bfed95e02e6eadabb4baf7e3078b0bd1b4d7b6b0b68378900502"
+dependencies = [
+ "winapi-util",
+]
+
+[[package]]
+name = "schannel"
+version = "0.1.29"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "91c1b7e4904c873ef0710c1f407dde2e6287de2bebc1bbbf7d430bb7cbffd939"
+dependencies = [
+ "windows-sys 0.61.2",
+]
+
 [[package]]
 name = "scopeguard"
 version = "1.2.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "94143f37725109f92c262ed2cf5e59bce7498c01bcc1502d7b9afe439a4e9f49"

+[[package]]
+name = "security-framework"
+version = "3.7.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "b7f4bc775c73d9a02cde8bf7b2ec4c9d12743edf609006c7facc23998404cd1d"
+dependencies = [
+ "bitflags",
+ "core-foundation",
+ "core-foundation-sys",
+ "libc",
+ "security-framework-sys",
+]
+
+[[package]]
+name = "security-framework-sys"
+version = "2.17.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "6ce2691df843ecc5d231c0b14ece2acc3efb62c0a398c7e1d875f3983ce020e3"
+dependencies = [
+ "core-foundation-sys",
+ "libc",
+]
+
 [[package]]
 name = "serde"
 version = "1.0.228"
@@ -695,12 +999,34 @@ dependencies = [
 "libc",
 ]

+[[package]]
+name = "siphasher"
+version = "1.0.2"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "b2aa850e253778c88a04c3d7323b043aeda9d3e30d5971937c1855769763678e"
+
+[[package]]
+name = "slab"
+version = "0.4.12"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "0c790de23124f9ab44544d7ac05d60440adc586479ce501c1d6d7da3cd8c9cf5"
+
 [[package]]
 name = "smallvec"
 version = "1.15.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "67b1b7a3b5fe4f1376887184045fcf45c69e92af734b7aaddc05fb777b6fbd03"

+[[package]]
+name = "socket2"
+version = "0.5.10"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "e22376abed350d73dd1cd119b57ffccad95b4e585a7cda43e286245ce23c0678"
+dependencies = [
+ "libc",
+ "windows-sys 0.52.0",
+]
+
 [[package]]
 name = "socket2"
 version = "0.6.2"
@@ -734,6 +1060,46 @@ dependencies = [
 "unicode-ident",
 ]

+[[package]]
+name = "thiserror"
+version = "1.0.69"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "b6aaf5339b578ea85b50e080feb250a3e8ae8cfcdff9a461c9ec2904bc923f52"
+dependencies = [
+ "thiserror-impl 1.0.69",
+]
+
+[[package]]
+name = "thiserror"
+version = "2.0.18"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "4288b5bcbc7920c07a1149a35cf9590a2aa808e0bc1eafaade0b80947865fbc4"
+dependencies = [
+ "thiserror-impl 2.0.18",
+]
+
+[[package]]
+name = "thiserror-impl"
+version = "1.0.69"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "4fee6c4efc90059e10f81e6d42c60a18f76588c3d74cb83a0b242a2b6c7504c1"
+dependencies = [
+ "proc-macro2",
+ "quote",
+ "syn",
+]
+
+[[package]]
+name = "thiserror-impl"
+version = "2.0.18"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "ebc4ee7f67670e9b64d05fa4253e753e016c6c95ff35b89b7941d6b856dec1d5"
+dependencies = [
+ "proc-macro2",
+ "quote",
+ "syn",
+]
+
 [[package]]
 name = "time"
 version = "0.3.47"
@@ -753,6 +1119,21 @@ version = "0.1.8"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "7694e1cfe791f8d31026952abf09c69ca6f6fa4e1a1229e18988f06a04a12dca"

+[[package]]
+name = "tinyvec"
+version = "1.11.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "3e61e67053d25a4e82c844e8424039d9745781b3fc4f32b8d55ed50f5f667ef3"
+dependencies = [
+ "tinyvec_macros",
+]
+
+[[package]]
+name = "tinyvec_macros"
+version = "0.1.1"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "1f3ccbac311fea05f86f61904b462b55fb3df8837a366dfc601a0161d0532f20"
+
 [[package]]
 name = "tokio"
 version = "1.49.0"
@@ -765,7 +1146,7 @@ dependencies = [
 "parking_lot",
 "pin-project-lite",
 "signal-hook-registry",
- "socket2",
+ "socket2 0.6.2",
 "tokio-macros",
 "windows-sys 0.61.2",
 ]
@@ -804,6 +1185,26 @@ dependencies = [
 "tokio",
 ]

+[[package]]
+name = "tracing"
+version = "0.1.44"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "63e71662fa4b2a2c3a26f570f037eb95bb1f85397f3cd8076caed2f026a6d100"
+dependencies = [
+ "log",
+ "pin-project-lite",
+ "tracing-core",
+]
+
+[[package]]
+name = "tracing-core"
+version = "0.1.36"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "db97caf9d906fbde555dd62fa95ddba9eecfd14cb388e4f491a66d74cd5fb79a"
+dependencies = [
+ "once_cell",
+]
+
 [[package]]
 name = "unicode-ident"
 version = "1.0.24"
@@ -822,6 +1223,16 @@ version = "0.2.2"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "06abde3611657adf66d383f00b093d7faecc7fa57071cce2578660c9f1010821"

+[[package]]
+name = "walkdir"
+version = "2.5.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "29790946404f91d9c5d06f9874efddea1dc06c5efe94541a7d6863108e3a5e4b"
+dependencies = [
+ "same-file",
+ "winapi-util",
+]
+
 [[package]]
 name = "wasi"
 version = "0.11.1+wasi-snapshot-preview1"
@@ -837,12 +1248,94 @@ dependencies = [
 "wit-bindgen",
 ]

+[[package]]
+name = "wasm-bindgen"
+version = "0.2.114"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "6532f9a5c1ece3798cb1c2cfdba640b9b3ba884f5db45973a6f442510a87d38e"
+dependencies = [
+ "cfg-if",
+ "once_cell",
+ "rustversion",
+ "wasm-bindgen-macro",
+ "wasm-bindgen-shared",
+]
+
+[[package]]
+name = "wasm-bindgen-macro"
+version = "0.2.114"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "18a2d50fcf105fb33bb15f00e7a77b772945a2ee45dcf454961fd843e74c18e6"
+dependencies = [
+ "quote",
+ "wasm-bindgen-macro-support",
+]
+
+[[package]]
+name = "wasm-bindgen-macro-support"
+version = "0.2.114"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "03ce4caeaac547cdf713d280eda22a730824dd11e6b8c3ca9e42247b25c631e3"
+dependencies = [
+ "bumpalo",
+ "proc-macro2",
+ "quote",
+ "syn",
+ "wasm-bindgen-shared",
+]
+
+[[package]]
+name = "wasm-bindgen-shared"
+version = "0.2.114"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "75a326b8c223ee17883a4251907455a2431acc2791c98c26279376490c378c16"
+dependencies = [
+ "unicode-ident",
+]
+
+[[package]]
+name = "web-time"
+version = "1.1.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "5a6580f308b1fad9207618087a65c04e7a10bc77e02c8e84e9b00dd4b12fa0bb"
+dependencies = [
+ "js-sys",
+ "wasm-bindgen",
+]
+
+[[package]]
+name = "webpki-root-certs"
+version = "1.0.6"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "804f18a4ac2676ffb4e8b5b5fa9ae38af06df08162314f96a68d2a363e21a8ca"
+dependencies = [
+ "rustls-pki-types",
+]
+
+[[package]]
+name = "winapi-util"
+version = "0.1.11"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "c2a7b1c03c876122aa43f3020e6c3c3ee5c05081c9a00739faf7503aeba10d22"
+dependencies = [
+ "windows-sys 0.61.2",
+]
+
 [[package]]
 name = "windows-link"
 version = "0.2.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "f0805222e57f7521d6a62e36fa9163bc891acd422f971defe97d64e70d0a4fe5"

+[[package]]
+name = "windows-sys"
+version = "0.45.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "75283be5efb2831d37ea142365f009c02ec203cd29a3ebecbc093d52315b66d0"
+dependencies = [
+ "windows-targets 0.42.2",
+]
+
 [[package]]
 name = "windows-sys"
 version = "0.52.0"
@@ -870,6 +1363,21 @@ dependencies = [
 "windows-link",
 ]

+[[package]]
+name = "windows-targets"
+version = "0.42.2"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "8e5180c00cd44c9b1c88adb3693291f1cd93605ded80c250a75d472756b4d071"
+dependencies = [
+ "windows_aarch64_gnullvm 0.42.2",
+ "windows_aarch64_msvc 0.42.2",
+ "windows_i686_gnu 0.42.2",
+ "windows_i686_msvc 0.42.2",
+ "windows_x86_64_gnu 0.42.2",
+ "windows_x86_64_gnullvm 0.42.2",
+ "windows_x86_64_msvc 0.42.2",
+]
+
 [[package]]
 name = "windows-targets"
 version = "0.52.6"
@@ -903,6 +1411,12 @@ dependencies = [
 "windows_x86_64_msvc 0.53.1",
 ]

+[[package]]
+name = "windows_aarch64_gnullvm"
+version = "0.42.2"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "597a5118570b68bc08d8d59125332c54f1ba9d9adeedeef5b99b02ba2b0698f8"
+
 [[package]]
 name = "windows_aarch64_gnullvm"
 version = "0.52.6"
@@ -915,6 +1429,12 @@ version = "0.53.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "a9d8416fa8b42f5c947f8482c43e7d89e73a173cead56d044f6a56104a6d1b53"

+[[package]]
+name = "windows_aarch64_msvc"
+version = "0.42.2"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "e08e8864a60f06ef0d0ff4ba04124db8b0fb3be5776a5cd47641e942e58c4d43"
+
 [[package]]
 name = "windows_aarch64_msvc"
 version = "0.52.6"
@@ -927,6 +1447,12 @@ version = "0.53.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "b9d782e804c2f632e395708e99a94275910eb9100b2114651e04744e9b125006"

+[[package]]
+name = "windows_i686_gnu"
+version = "0.42.2"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "c61d927d8da41da96a81f029489353e68739737d3beca43145c8afec9a31a84f"
+
 [[package]]
 name = "windows_i686_gnu"
 version = "0.52.6"
@@ -951,6 +1477,12 @@ version = "0.53.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "fa7359d10048f68ab8b09fa71c3daccfb0e9b559aed648a8f95469c27057180c"

+[[package]]
+name = "windows_i686_msvc"
+version = "0.42.2"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "44d840b6ec649f480a41c8d80f9c65108b92d89345dd94027bfe06ac444d1060"
+
 [[package]]
 name = "windows_i686_msvc"
 version = "0.52.6"
@@ -963,6 +1495,12 @@ version = "0.53.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "1e7ac75179f18232fe9c285163565a57ef8d3c89254a30685b57d83a38d326c2"

+[[package]]
+name = "windows_x86_64_gnu"
+version = "0.42.2"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "8de912b8b8feb55c064867cf047dda097f92d51efad5b491dfb98f6bbb70cb36"
+
 [[package]]
 name = "windows_x86_64_gnu"
 version = "0.52.6"
@@ -975,6 +1513,12 @@ version = "0.53.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "9c3842cdd74a865a8066ab39c8a7a473c0778a3f29370b5fd6b4b9aa7df4a499"

+[[package]]
+name = "windows_x86_64_gnullvm"
+version = "0.42.2"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "26d41b46a36d453748aedef1486d5c7a85db22e56aff34643984ea85514e94a3"
+
 [[package]]
 name = "windows_x86_64_gnullvm"
 version = "0.52.6"
@@ -987,6 +1531,12 @@ version = "0.53.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "0ffa179e2d07eee8ad8f57493436566c7cc30ac536a3379fdf008f47f6bb7ae1"

+[[package]]
+name = "windows_x86_64_msvc"
+version = "0.42.2"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "9aec5da331524158c6d1a4ac0ab1541149c0b9505fde06423b02f5ef0106b9f0"
+
 [[package]]
 name = "windows_x86_64_msvc"
 version = "0.52.6"
@@ -1014,6 +1564,26 @@ dependencies = [
 "time",
 ]

+[[package]]
+name = "zerocopy"
+version = "0.8.42"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "f2578b716f8a7a858b7f02d5bd870c14bf4ddbbcf3a4c05414ba6503640505e3"
+dependencies = [
+ "zerocopy-derive",
+]
+
+[[package]]
+name = "zerocopy-derive"
+version = "0.8.42"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "7e6cc098ea4d3bd6246687de65af3f920c430e236bee1e3bf2e441463f08a02f"
+dependencies = [
+ "proc-macro2",
+ "quote",
+ "syn",
+]
+
 [[package]]
 name = "zeroize"
 version = "1.8.2"
--- a/rust/crates/remoteingress-bin/src/main.rs
+++ b/rust/crates/remoteingress-bin/src/main.rs
@@ -173,10 +173,10 @@ async fn handle_request(
                                    serde_json::json!({ "edgeId": edge_id, "peerAddr": peer_addr }),
                                );
                            }
-                            HubEvent::EdgeDisconnected { edge_id } => {
+                            HubEvent::EdgeDisconnected { edge_id, reason } => {
                                send_event(
                                    "edgeDisconnected",
-                                    serde_json::json!({ "edgeId": edge_id }),
+                                    serde_json::json!({ "edgeId": edge_id, "reason": reason }),
                                );
                            }
                            HubEvent::StreamOpened {
@@ -295,8 +295,8 @@ async fn handle_request(
                            EdgeEvent::TunnelConnected => {
                                send_event("tunnelConnected", serde_json::json!({}));
                            }
-                            EdgeEvent::TunnelDisconnected => {
-                                send_event("tunnelDisconnected", serde_json::json!({}));
+                            EdgeEvent::TunnelDisconnected { reason } => {
+                                send_event("tunnelDisconnected", serde_json::json!({ "reason": reason }));
                            }
                            EdgeEvent::PublicIpDiscovered { ip } => {
                                send_event(
--- a/rust/crates/remoteingress-core/Cargo.toml
+++ b/rust/crates/remoteingress-core/Cargo.toml
@@ -7,6 +7,7 @@ edition = "2021"
 remoteingress-protocol = { path = "../remoteingress-protocol" }
 tokio = { version = "1", features = ["full"] }
 tokio-rustls = "0.26"
+bytes = "1"
 rustls = { version = "0.23", default-features = false, features = ["ring", "logging", "std", "tls12"] }
 rcgen = "0.13"
 serde = { version = "1", features = ["derive"] }
@@ -14,3 +15,5 @@ serde_json = "1"
 log = "0.4"
 rustls-pemfile = "2"
 tokio-util = "0.7"
+socket2 = "0.5"
+quinn = "0.11"
--- a/rust/crates/remoteingress-core/src/edge.rs
+++ b/rust/crates/remoteingress-core/src/edge.rs
--- a/rust/crates/remoteingress-core/src/hub.rs
+++ b/rust/crates/remoteingress-core/src/hub.rs
--- a/rust/crates/remoteingress-core/src/lib.rs
+++ b/rust/crates/remoteingress-core/src/lib.rs
@@ -1,5 +1,6 @@
 pub mod hub;
 pub mod edge;
 pub mod stun;
+pub mod transport;

 pub use remoteingress_protocol as protocol;
--- a/rust/crates/remoteingress-core/src/transport/mod.rs
+++ b/rust/crates/remoteingress-core/src/transport/mod.rs
@@ -0,0 +1,22 @@
+pub mod quic;
+
+use serde::{Deserialize, Serialize};
+
+/// Transport mode for the tunnel connection between edge and hub.
+///
+/// - `TcpTls`: TCP + TLS with frame-based multiplexing via TunnelIo (default).
+/// - `Quic`: QUIC with native stream multiplexing (one QUIC stream per tunneled connection).
+/// - `QuicWithFallback`: Try QUIC first, fall back to TCP+TLS if UDP is blocked.
+#[derive(Debug, Clone, Copy, PartialEq, Eq, Deserialize, Serialize)]
+#[serde(rename_all = "camelCase")]
+pub enum TransportMode {
+    TcpTls,
+    Quic,
+    QuicWithFallback,
+}
+
+impl Default for TransportMode {
+    fn default() -> Self {
+        TransportMode::TcpTls
+    }
+}
--- a/rust/crates/remoteingress-core/src/transport/quic.rs
+++ b/rust/crates/remoteingress-core/src/transport/quic.rs
@@ -0,0 +1,191 @@
+use std::sync::Arc;
+
+/// QUIC control stream message types (reuses frame type constants for consistency).
+pub const CTRL_CONFIG: u8 = 0x06;
+pub const CTRL_PING: u8 = 0x07;
+pub const CTRL_PONG: u8 = 0x08;
+
+/// Header size for control stream messages: [type:1][length:4] = 5 bytes.
+pub const CTRL_HEADER_SIZE: usize = 5;
+
+/// Build a quinn ClientConfig that skips server certificate verification
+/// (auth is via shared secret, same as the TCP+TLS path).
+pub fn build_quic_client_config() -> quinn::ClientConfig {
+    let mut tls_config = rustls::ClientConfig::builder()
+        .dangerous()
+        .with_custom_certificate_verifier(Arc::new(NoCertVerifier))
+        .with_no_client_auth();
+
+    // QUIC mandates ALPN negotiation (RFC 9001 §8.1).
+    // Must match the server's ALPN protocol.
+    tls_config.alpn_protocols = vec![b"remoteingress".to_vec()];
+
+    let quic_config = quinn::crypto::rustls::QuicClientConfig::try_from(tls_config)
+        .expect("failed to build QUIC client config from rustls config");
+
+    let mut transport = quinn::TransportConfig::default();
+    transport.keep_alive_interval(Some(std::time::Duration::from_secs(15)));
+    transport.max_idle_timeout(Some(
+        quinn::IdleTimeout::try_from(std::time::Duration::from_secs(45)).unwrap(),
+    ));
+    // Match MAX_STREAMS_PER_EDGE (1024) from hub.rs.
+    // Default is 100 which is too low for high-concurrency tunneling.
+    transport.max_concurrent_bidi_streams(1024u32.into());
+
+    let mut client_config = quinn::ClientConfig::new(Arc::new(quic_config));
+    client_config.transport_config(Arc::new(transport));
+    client_config
+}
+
+/// Build a quinn ServerConfig from the same TLS server config used for TCP+TLS.
+pub fn build_quic_server_config(
+    tls_server_config: rustls::ServerConfig,
+) -> Result<quinn::ServerConfig, Box<dyn std::error::Error + Send + Sync>> {
+    let quic_config = quinn::crypto::rustls::QuicServerConfig::try_from(tls_server_config)?;
+
+    let mut transport = quinn::TransportConfig::default();
+    transport.keep_alive_interval(Some(std::time::Duration::from_secs(15)));
+    transport.max_idle_timeout(Some(
+        quinn::IdleTimeout::try_from(std::time::Duration::from_secs(45)).unwrap(),
+    ));
+    transport.max_concurrent_bidi_streams(1024u32.into());
+
+    let mut server_config = quinn::ServerConfig::with_crypto(Arc::new(quic_config));
+    server_config.transport_config(Arc::new(transport));
+    Ok(server_config)
+}
+
+/// Write a control message to a QUIC send stream.
+/// Format: [type:1][length:4][payload:N]
+pub async fn write_ctrl_message(
+    send: &mut quinn::SendStream,
+    msg_type: u8,
+    payload: &[u8],
+) -> Result<(), std::io::Error> {
+    let len = payload.len() as u32;
+    let mut header = [0u8; CTRL_HEADER_SIZE];
+    header[0] = msg_type;
+    header[1..5].copy_from_slice(&len.to_be_bytes());
+    send.write_all(&header).await?;
+    if !payload.is_empty() {
+        send.write_all(payload).await?;
+    }
+    Ok(())
+}
+
+/// Read a control message from a QUIC recv stream.
+/// Returns (msg_type, payload). Returns None on EOF.
+pub async fn read_ctrl_message(
+    recv: &mut quinn::RecvStream,
+) -> Result<Option<(u8, Vec<u8>)>, std::io::Error> {
+    let mut header = [0u8; CTRL_HEADER_SIZE];
+    match recv.read_exact(&mut header).await {
+        Ok(()) => {}
+        Err(e) => {
+            if let quinn::ReadExactError::FinishedEarly(_) = e {
+                return Ok(None);
+            }
+            return Err(std::io::Error::new(std::io::ErrorKind::Other, e));
+        }
+    }
+    let msg_type = header[0];
+    let len = u32::from_be_bytes([header[1], header[2], header[3], header[4]]) as usize;
+    let mut payload = vec![0u8; len];
+    if len > 0 {
+        recv.read_exact(&mut payload).await.map_err(|e| {
+            std::io::Error::new(std::io::ErrorKind::Other, e)
+        })?;
+    }
+    Ok(Some((msg_type, payload)))
+}
+
+/// Write the PROXY v1 header as the first bytes on a QUIC data stream.
+/// The header is length-prefixed so the receiver knows where it ends and data begins.
+/// Format: [header_len:4][proxy_header:N]
+pub async fn write_proxy_header(
+    send: &mut quinn::SendStream,
+    proxy_header: &str,
+) -> Result<(), std::io::Error> {
+    let header_bytes = proxy_header.as_bytes();
+    let len = header_bytes.len() as u32;
+    send.write_all(&len.to_be_bytes()).await?;
+    send.write_all(header_bytes).await?;
+    Ok(())
+}
+
+/// Read the PROXY v1 header from the first bytes of a QUIC data stream.
+/// Returns the header string.
+pub async fn read_proxy_header(
+    recv: &mut quinn::RecvStream,
+) -> Result<String, std::io::Error> {
+    let mut len_buf = [0u8; 4];
+    recv.read_exact(&mut len_buf).await.map_err(|e| {
+        std::io::Error::new(std::io::ErrorKind::Other, e)
+    })?;
+    let len = u32::from_be_bytes(len_buf) as usize;
+    if len > 8192 {
+        return Err(std::io::Error::new(
+            std::io::ErrorKind::InvalidData,
+            "proxy header too long",
+        ));
+    }
+    let mut header = vec![0u8; len];
+    recv.read_exact(&mut header).await.map_err(|e| {
+        std::io::Error::new(std::io::ErrorKind::Other, e)
+    })?;
+    String::from_utf8(header).map_err(|_| {
+        std::io::Error::new(std::io::ErrorKind::InvalidData, "proxy header not UTF-8")
+    })
+}
+
+/// TLS certificate verifier that accepts any certificate (auth is via shared secret).
+/// Same as the one in edge.rs but placed here so the QUIC module is self-contained.
+#[derive(Debug)]
+struct NoCertVerifier;
+
+impl rustls::client::danger::ServerCertVerifier for NoCertVerifier {
+    fn verify_server_cert(
+        &self,
+        _end_entity: &rustls::pki_types::CertificateDer<'_>,
+        _intermediates: &[rustls::pki_types::CertificateDer<'_>],
+        _server_name: &rustls::pki_types::ServerName<'_>,
+        _ocsp_response: &[u8],
+        _now: rustls::pki_types::UnixTime,
+    ) -> Result<rustls::client::danger::ServerCertVerified, rustls::Error> {
+        Ok(rustls::client::danger::ServerCertVerified::assertion())
+    }
+
+    fn verify_tls12_signature(
+        &self,
+        _message: &[u8],
+        _cert: &rustls::pki_types::CertificateDer<'_>,
+        _dss: &rustls::DigitallySignedStruct,
+    ) -> Result<rustls::client::danger::HandshakeSignatureValid, rustls::Error> {
+        Ok(rustls::client::danger::HandshakeSignatureValid::assertion())
+    }
+
+    fn verify_tls13_signature(
+        &self,
+        _message: &[u8],
+        _cert: &rustls::pki_types::CertificateDer<'_>,
+        _dss: &rustls::DigitallySignedStruct,
+    ) -> Result<rustls::client::danger::HandshakeSignatureValid, rustls::Error> {
+        Ok(rustls::client::danger::HandshakeSignatureValid::assertion())
+    }
+
+    fn supported_verify_schemes(&self) -> Vec<rustls::SignatureScheme> {
+        vec![
+            rustls::SignatureScheme::RSA_PKCS1_SHA256,
+            rustls::SignatureScheme::RSA_PKCS1_SHA384,
+            rustls::SignatureScheme::RSA_PKCS1_SHA512,
+            rustls::SignatureScheme::ECDSA_NISTP256_SHA256,
+            rustls::SignatureScheme::ECDSA_NISTP384_SHA384,
+            rustls::SignatureScheme::ECDSA_NISTP521_SHA512,
+            rustls::SignatureScheme::RSA_PSS_SHA256,
+            rustls::SignatureScheme::RSA_PSS_SHA384,
+            rustls::SignatureScheme::RSA_PSS_SHA512,
+            rustls::SignatureScheme::ED25519,
+            rustls::SignatureScheme::ED448,
+        ]
+    }
+}
--- a/rust/crates/remoteingress-protocol/Cargo.toml
+++ b/rust/crates/remoteingress-protocol/Cargo.toml
@@ -4,4 +4,10 @@ version = "2.0.0"
 edition = "2021"

 [dependencies]
-tokio = { version = "1", features = ["io-util"] }
+tokio = { version = "1", features = ["io-util", "sync", "time"] }
+tokio-util = "0.7"
+bytes = "1"
+log = "0.4"
+
+[dev-dependencies]
+tokio = { version = "1", features = ["io-util", "macros", "rt"] }
--- a/rust/crates/remoteingress-protocol/src/lib.rs
+++ b/rust/crates/remoteingress-protocol/src/lib.rs
@@ -1,4 +1,11 @@
-use tokio::io::{AsyncRead, AsyncReadExt};
+use std::collections::VecDeque;
+use std::future::Future;
+use std::pin::Pin;
+use std::task::{Context, Poll};
+use std::time::Duration;
+use bytes::{Bytes, BytesMut, BufMut};
+use tokio::io::{AsyncRead, AsyncReadExt, AsyncWrite, ReadBuf};
+use tokio::time::Instant;

 // Frame type constants
 pub const FRAME_OPEN: u8 = 0x01;
@@ -19,19 +26,36 @@ pub const FRAME_HEADER_SIZE: usize = 9;
 pub const MAX_PAYLOAD_SIZE: u32 = 16 * 1024 * 1024;

 // Per-stream flow control constants
-/// Initial per-stream window size (4 MB). Sized for full throughput at high RTT:
-/// at 100ms RTT, this sustains ~40 MB/s per stream.
+/// Initial (and maximum) per-stream window size (4 MB).
 pub const INITIAL_STREAM_WINDOW: u32 = 4 * 1024 * 1024;
 /// Send WINDOW_UPDATE after consuming this many bytes (half the initial window).
 pub const WINDOW_UPDATE_THRESHOLD: u32 = INITIAL_STREAM_WINDOW / 2;
 /// Maximum window size to prevent overflow.
-pub const MAX_WINDOW_SIZE: u32 = 16 * 1024 * 1024;
+pub const MAX_WINDOW_SIZE: u32 = 4 * 1024 * 1024;
+
+// Sustained stream classification constants
+/// Throughput threshold for sustained classification (2.5 MB/s = 20 Mbit/s).
+pub const SUSTAINED_THRESHOLD_BPS: u64 = 2_500_000;
+/// Minimum duration before a stream can be classified as sustained.
+pub const SUSTAINED_MIN_DURATION_SECS: u64 = 10;
+/// Fixed window for sustained streams (1 MB — the floor).
+pub const SUSTAINED_WINDOW: u32 = 1 * 1024 * 1024;
+/// Maximum bytes written from sustained queue per forced drain (1 MB/s guarantee).
+pub const SUSTAINED_FORCED_DRAIN_CAP: usize = 1_048_576;

 /// Encode a WINDOW_UPDATE frame for a specific stream.
-pub fn encode_window_update(stream_id: u32, frame_type: u8, increment: u32) -> Vec<u8> {
+pub fn encode_window_update(stream_id: u32, frame_type: u8, increment: u32) -> Bytes {
    encode_frame(stream_id, frame_type, &increment.to_be_bytes())
 }

+/// Compute the target per-stream window size based on the number of active streams.
+/// Total memory budget is ~200MB shared across all streams. Up to 50 streams get the
+/// full 4MB window; above that the window scales down to a 1MB floor at 200+ streams.
+pub fn compute_window_for_stream_count(active: u32) -> u32 {
+    let per_stream = (200 * 1024 * 1024u64) / (active.max(1) as u64);
+    per_stream.clamp(1 * 1024 * 1024, INITIAL_STREAM_WINDOW as u64) as u32
+}
+
 /// Decode a WINDOW_UPDATE payload into a byte increment. Returns None if payload is malformed.
 pub fn decode_window_update(payload: &[u8]) -> Option<u32> {
    if payload.len() != 4 {
@@ -45,18 +69,28 @@ pub fn decode_window_update(payload: &[u8]) -> Option<u32> {
 pub struct Frame {
    pub stream_id: u32,
    pub frame_type: u8,
-    pub payload: Vec<u8>,
+    pub payload: Bytes,
 }

 /// Encode a frame into bytes: [stream_id:4][type:1][length:4][payload]
-pub fn encode_frame(stream_id: u32, frame_type: u8, payload: &[u8]) -> Vec<u8> {
+pub fn encode_frame(stream_id: u32, frame_type: u8, payload: &[u8]) -> Bytes {
    let len = payload.len() as u32;
-    let mut buf = Vec::with_capacity(FRAME_HEADER_SIZE + payload.len());
-    buf.extend_from_slice(&stream_id.to_be_bytes());
-    buf.push(frame_type);
-    buf.extend_from_slice(&len.to_be_bytes());
-    buf.extend_from_slice(payload);
-    buf
+    let mut buf = BytesMut::with_capacity(FRAME_HEADER_SIZE + payload.len());
+    buf.put_slice(&stream_id.to_be_bytes());
+    buf.put_u8(frame_type);
+    buf.put_slice(&len.to_be_bytes());
+    buf.put_slice(payload);
+    buf.freeze()
+}
+
+/// Write a frame header into `buf[0..FRAME_HEADER_SIZE]`.
+/// The caller must ensure payload is already at `buf[FRAME_HEADER_SIZE..FRAME_HEADER_SIZE + payload_len]`.
+/// This enables zero-copy encoding: read directly into `buf[FRAME_HEADER_SIZE..]`, then
+/// prepend the header without copying the payload.
+pub fn encode_frame_header(buf: &mut [u8], stream_id: u32, frame_type: u8, payload_len: usize) {
+    buf[0..4].copy_from_slice(&stream_id.to_be_bytes());
+    buf[4] = frame_type;
+    buf[5..9].copy_from_slice(&(payload_len as u32).to_be_bytes());
 }

 /// Build a PROXY protocol v1 header line.
@@ -111,13 +145,17 @@ impl<R: AsyncRead + Unpin> FrameReader<R> {
        ]);

        if length > MAX_PAYLOAD_SIZE {
+            log::error!(
+                "CORRUPT FRAME HEADER: raw={:02x?} stream_id={} type=0x{:02x} length={}",
+                self.header_buf, stream_id, frame_type, length
+            );
            return Err(std::io::Error::new(
                std::io::ErrorKind::InvalidData,
-                format!("frame payload too large: {} bytes", length),
+                format!("frame payload too large: {} bytes (header={:02x?})", length, self.header_buf),
            ));
        }

-        let mut payload = vec![0u8; length as usize];
+        let mut payload = BytesMut::zeroed(length as usize);
        if length > 0 {
            self.reader.read_exact(&mut payload).await?;
        }
@@ -125,7 +163,7 @@ impl<R: AsyncRead + Unpin> FrameReader<R> {
        Ok(Some(Frame {
            stream_id,
            frame_type,
-            payload,
+            payload: payload.freeze(),
        }))
    }

@@ -135,10 +173,409 @@ impl<R: AsyncRead + Unpin> FrameReader<R> {
    }
 }

+// ---------------------------------------------------------------------------
+// TunnelIo: single-owner I/O multiplexer for the TLS tunnel connection
+// ---------------------------------------------------------------------------
+
+/// Events produced by the TunnelIo event loop.
+#[derive(Debug)]
+pub enum TunnelEvent {
+    /// A complete frame was read from the remote side.
+    Frame(Frame),
+    /// The remote side closed the connection (EOF).
+    Eof,
+    /// A read error occurred.
+    ReadError(std::io::Error),
+    /// A write error occurred.
+    WriteError(std::io::Error),
+    /// No frames received for the liveness timeout duration.
+    LivenessTimeout,
+    /// The cancellation token was triggered.
+    Cancelled,
+}
+
+/// Write state extracted into a sub-struct so the borrow checker can see
+/// disjoint field access between `self.write` and `self.stream`.
+struct WriteState {
+    ctrl_queue: VecDeque<Bytes>,      // PONG, WINDOW_UPDATE, CLOSE, OPEN — always first
+    data_queue: VecDeque<Bytes>,      // DATA, DATA_BACK — only when ctrl is empty
+    sustained_queue: VecDeque<Bytes>, // DATA, DATA_BACK from sustained streams — lowest priority
+    offset: usize,                    // progress within current frame being written
+    flush_needed: bool,
+    // Sustained starvation prevention: guaranteed 1 MB/s drain
+    sustained_last_drain: Instant,
+    sustained_bytes_this_period: usize,
+}
+
+impl WriteState {
+    fn has_work(&self) -> bool {
+        !self.ctrl_queue.is_empty() || !self.data_queue.is_empty() || !self.sustained_queue.is_empty()
+    }
+}
+
+/// Single-owner I/O engine for the tunnel TLS connection.
+///
+/// Owns the TLS stream directly — no `tokio::io::split()`, no mutex.
+/// Uses three priority write queues:
+///   1. ctrl  (PONG, WINDOW_UPDATE, CLOSE, OPEN) — always first
+///   2. data  (DATA, DATA_BACK from normal streams) — when ctrl empty
+///   3. sustained (DATA, DATA_BACK from sustained streams) — lowest priority,
+///      drained freely when ctrl+data empty, or forced 1MB/s when they're not
+pub struct TunnelIo<S> {
+    stream: S,
+    // Read state: accumulate bytes, parse frames incrementally
+    read_buf: Vec<u8>,
+    read_pos: usize,
+    parse_pos: usize,
+    // Write state: extracted sub-struct for safe disjoint borrows
+    write: WriteState,
+}
+
+impl<S: AsyncRead + AsyncWrite + Unpin> TunnelIo<S> {
+    pub fn new(stream: S, initial_data: Vec<u8>) -> Self {
+        let read_pos = initial_data.len();
+        let mut read_buf = initial_data;
+        if read_buf.capacity() < 65536 {
+            read_buf.reserve(65536 - read_buf.len());
+        }
+        Self {
+            stream,
+            read_buf,
+            read_pos,
+            parse_pos: 0,
+            write: WriteState {
+                ctrl_queue: VecDeque::new(),
+                data_queue: VecDeque::new(),
+                sustained_queue: VecDeque::new(),
+                offset: 0,
+                flush_needed: false,
+                sustained_last_drain: Instant::now(),
+                sustained_bytes_this_period: 0,
+            },
+        }
+    }
+
+    /// Queue a high-priority control frame (PONG, WINDOW_UPDATE, CLOSE, OPEN).
+    pub fn queue_ctrl(&mut self, frame: Bytes) {
+        self.write.ctrl_queue.push_back(frame);
+    }
+
+    /// Queue a lower-priority data frame (DATA, DATA_BACK).
+    pub fn queue_data(&mut self, frame: Bytes) {
+        self.write.data_queue.push_back(frame);
+    }
+
+    /// Queue a lowest-priority sustained data frame.
+    pub fn queue_sustained(&mut self, frame: Bytes) {
+        self.write.sustained_queue.push_back(frame);
+    }
+
+    /// Try to parse a complete frame from the read buffer.
+    /// Uses a parse_pos cursor to avoid drain() on every frame.
+    pub fn try_parse_frame(&mut self) -> Option<Result<Frame, std::io::Error>> {
+        let available = self.read_pos - self.parse_pos;
+        if available < FRAME_HEADER_SIZE {
+            return None;
+        }
+
+        let base = self.parse_pos;
+        let stream_id = u32::from_be_bytes([
+            self.read_buf[base], self.read_buf[base + 1],
+            self.read_buf[base + 2], self.read_buf[base + 3],
+        ]);
+        let frame_type = self.read_buf[base + 4];
+        let length = u32::from_be_bytes([
+            self.read_buf[base + 5], self.read_buf[base + 6],
+            self.read_buf[base + 7], self.read_buf[base + 8],
+        ]);
+
+        if length > MAX_PAYLOAD_SIZE {
+            let header = [
+                self.read_buf[base], self.read_buf[base + 1],
+                self.read_buf[base + 2], self.read_buf[base + 3],
+                self.read_buf[base + 4], self.read_buf[base + 5],
+                self.read_buf[base + 6], self.read_buf[base + 7],
+                self.read_buf[base + 8],
+            ];
+            log::error!(
+                "CORRUPT FRAME HEADER: raw={:02x?} stream_id={} type=0x{:02x} length={}",
+                header, stream_id, frame_type, length
+            );
+            return Some(Err(std::io::Error::new(
+                std::io::ErrorKind::InvalidData,
+                format!("frame payload too large: {} bytes (header={:02x?})", length, header),
+            )));
+        }
+
+        let total_frame_size = FRAME_HEADER_SIZE + length as usize;
+        if available < total_frame_size {
+            return None;
+        }
+
+        let payload = Bytes::copy_from_slice(
+            &self.read_buf[base + FRAME_HEADER_SIZE..base + total_frame_size],
+        );
+        self.parse_pos += total_frame_size;
+
+        // Compact when parse_pos > half the data to reclaim memory
+        if self.parse_pos > self.read_pos / 2 && self.parse_pos > 0 {
+            self.read_buf.drain(..self.parse_pos);
+            self.read_pos -= self.parse_pos;
+            self.parse_pos = 0;
+        }
+
+        Some(Ok(Frame { stream_id, frame_type, payload }))
+    }
+
+    /// Poll-based I/O step. Returns Ready on events, Pending when idle.
+    ///
+    /// Order: write(ctrl->data->sustained) -> flush -> read -> channels -> timers
+    pub fn poll_step(
+        &mut self,
+        cx: &mut Context<'_>,
+        ctrl_rx: &mut tokio::sync::mpsc::Receiver<Bytes>,
+        data_rx: &mut tokio::sync::mpsc::Receiver<Bytes>,
+        sustained_rx: &mut tokio::sync::mpsc::Receiver<Bytes>,
+        liveness_deadline: &mut Pin<Box<tokio::time::Sleep>>,
+        cancel_token: &tokio_util::sync::CancellationToken,
+    ) -> Poll<TunnelEvent> {
+        // 1. WRITE: 3-tier priority — ctrl first, then data, then sustained.
+        //    Sustained drains freely when ctrl+data are empty.
+        //    Write one frame, set flush_needed, then flush must complete before
+        //    writing more. This prevents unbounded TLS session buffer growth.
+        //    Safe: `self.write` and `self.stream` are disjoint fields.
+        let mut writes = 0;
+        while self.write.has_work() && writes < 16 && !self.write.flush_needed {
+            // Pick queue: ctrl > data > sustained
+            let queue_id = if !self.write.ctrl_queue.is_empty() {
+                0 // ctrl
+            } else if !self.write.data_queue.is_empty() {
+                1 // data
+            } else {
+                2 // sustained
+            };
+            let frame = match queue_id {
+                0 => self.write.ctrl_queue.front().unwrap(),
+                1 => self.write.data_queue.front().unwrap(),
+                _ => self.write.sustained_queue.front().unwrap(),
+            };
+            let remaining = &frame[self.write.offset..];
+
+            match Pin::new(&mut self.stream).poll_write(cx, remaining) {
+                Poll::Ready(Ok(0)) => {
+                    log::error!("TunnelIo: poll_write returned 0 (write zero), ctrl_q={} data_q={} sustained_q={}",
+                        self.write.ctrl_queue.len(), self.write.data_queue.len(), self.write.sustained_queue.len());
+                    return Poll::Ready(TunnelEvent::WriteError(
+                        std::io::Error::new(std::io::ErrorKind::WriteZero, "write zero"),
+                    ));
+                }
+                Poll::Ready(Ok(n)) => {
+                    self.write.offset += n;
+                    self.write.flush_needed = true;
+                    if self.write.offset >= frame.len() {
+                        match queue_id {
+                            0 => { self.write.ctrl_queue.pop_front(); }
+                            1 => { self.write.data_queue.pop_front(); }
+                            _ => {
+                                self.write.sustained_queue.pop_front();
+                                self.write.sustained_last_drain = Instant::now();
+                                self.write.sustained_bytes_this_period = 0;
+                            }
+                        }
+                        self.write.offset = 0;
+                        writes += 1;
+                    }
+                }
+                Poll::Ready(Err(e)) => {
+                    log::error!("TunnelIo: poll_write error: {} (ctrl_q={} data_q={} sustained_q={})",
+                        e, self.write.ctrl_queue.len(), self.write.data_queue.len(), self.write.sustained_queue.len());
+                    return Poll::Ready(TunnelEvent::WriteError(e));
+                }
+                Poll::Pending => break,
+            }
+        }
+
+        // 1b. FORCED SUSTAINED DRAIN: when ctrl/data have work but sustained is waiting,
+        //     guarantee at least 1 MB/s by draining up to SUSTAINED_FORCED_DRAIN_CAP
+        //     once per second.
+        if !self.write.sustained_queue.is_empty()
+            && (!self.write.ctrl_queue.is_empty() || !self.write.data_queue.is_empty())
+            && !self.write.flush_needed
+        {
+            let now = Instant::now();
+            if now.duration_since(self.write.sustained_last_drain) >= Duration::from_secs(1) {
+                self.write.sustained_bytes_this_period = 0;
+                self.write.sustained_last_drain = now;
+
+                while !self.write.sustained_queue.is_empty()
+                    && self.write.sustained_bytes_this_period < SUSTAINED_FORCED_DRAIN_CAP
+                    && !self.write.flush_needed
+                {
+                    let frame = self.write.sustained_queue.front().unwrap();
+                    let remaining = &frame[self.write.offset..];
+                    match Pin::new(&mut self.stream).poll_write(cx, remaining) {
+                        Poll::Ready(Ok(0)) => {
+                            return Poll::Ready(TunnelEvent::WriteError(
+                                std::io::Error::new(std::io::ErrorKind::WriteZero, "write zero"),
+                            ));
+                        }
+                        Poll::Ready(Ok(n)) => {
+                            self.write.offset += n;
+                            self.write.flush_needed = true;
+                            self.write.sustained_bytes_this_period += n;
+                            if self.write.offset >= frame.len() {
+                                self.write.sustained_queue.pop_front();
+                                self.write.offset = 0;
+                            }
+                        }
+                        Poll::Ready(Err(e)) => {
+                            return Poll::Ready(TunnelEvent::WriteError(e));
+                        }
+                        Poll::Pending => break,
+                    }
+                }
+            }
+        }
+
+        // 2. FLUSH: push encrypted data from TLS session to TCP.
+        if self.write.flush_needed {
+            match Pin::new(&mut self.stream).poll_flush(cx) {
+                Poll::Ready(Ok(())) => {
+                    self.write.flush_needed = false;
+                }
+                Poll::Ready(Err(e)) => {
+                    log::error!("TunnelIo: poll_flush error: {}", e);
+                    return Poll::Ready(TunnelEvent::WriteError(e));
+                }
+                Poll::Pending => {} // TCP waker will notify us
+            }
+        }
+
+        // 3. READ: drain stream until Pending to ensure the TCP waker is always registered.
+        //    Without this loop, a Ready return with partial frame data would consume
+        //    the waker without re-registering it, causing the task to sleep until a
+        //    timer or channel wakes it (potentially 15+ seconds of lost reads).
+        loop {
+            // Compact if needed to make room for reads
+            if self.parse_pos > 0 && self.read_buf.len() - self.read_pos < 32768 {
+                self.read_buf.drain(..self.parse_pos);
+                self.read_pos -= self.parse_pos;
+                self.parse_pos = 0;
+            }
+            if self.read_buf.len() < self.read_pos + 32768 {
+                self.read_buf.resize(self.read_pos + 32768, 0);
+            }
+            let mut rbuf = ReadBuf::new(&mut self.read_buf[self.read_pos..]);
+            match Pin::new(&mut self.stream).poll_read(cx, &mut rbuf) {
+                Poll::Ready(Ok(())) => {
+                    let n = rbuf.filled().len();
+                    if n == 0 {
+                        return Poll::Ready(TunnelEvent::Eof);
+                    }
+                    self.read_pos += n;
+                    if let Some(result) = self.try_parse_frame() {
+                        return match result {
+                            Ok(frame) => Poll::Ready(TunnelEvent::Frame(frame)),
+                            Err(e) => Poll::Ready(TunnelEvent::ReadError(e)),
+                        };
+                    }
+                    // Partial data — loop to call poll_read again so the TCP
+                    // waker is re-registered when it finally returns Pending.
+                }
+                Poll::Ready(Err(e)) => {
+                    log::error!("TunnelIo: poll_read error: {}", e);
+                    return Poll::Ready(TunnelEvent::ReadError(e));
+                }
+                Poll::Pending => break,
+            }
+        }
+
+        // 4. CHANNELS: drain ctrl (always — priority), data (only if queue is small).
+        //    Ctrl frames must never be delayed — always drain fully.
+        //    Data frames are gated: keep data in the bounded channel for proper
+        //    backpressure when TLS writes are slow. Without this gate, the internal
+        //    data_queue (unbounded VecDeque) grows to hundreds of MB under throttle -> OOM.
+        let mut got_new = false;
+        loop {
+            match ctrl_rx.poll_recv(cx) {
+                Poll::Ready(Some(frame)) => { self.write.ctrl_queue.push_back(frame); got_new = true; }
+                Poll::Ready(None) => {
+                    return Poll::Ready(TunnelEvent::WriteError(
+                        std::io::Error::new(std::io::ErrorKind::BrokenPipe, "ctrl channel closed"),
+                    ));
+                }
+                Poll::Pending => break,
+            }
+        }
+        if self.write.data_queue.len() < 64 {
+            loop {
+                match data_rx.poll_recv(cx) {
+                    Poll::Ready(Some(frame)) => { self.write.data_queue.push_back(frame); got_new = true; }
+                    Poll::Ready(None) => {
+                        return Poll::Ready(TunnelEvent::WriteError(
+                            std::io::Error::new(std::io::ErrorKind::BrokenPipe, "data channel closed"),
+                        ));
+                    }
+                    Poll::Pending => break,
+                }
+            }
+        }
+        // Sustained channel: drain when sustained_queue is small (same backpressure pattern).
+        // Channel close is non-fatal — not all connections have sustained streams.
+        if self.write.sustained_queue.len() < 64 {
+            loop {
+                match sustained_rx.poll_recv(cx) {
+                    Poll::Ready(Some(frame)) => { self.write.sustained_queue.push_back(frame); got_new = true; }
+                    Poll::Ready(None) | Poll::Pending => break,
+                }
+            }
+        }
+
+        // 5. TIMERS
+        if liveness_deadline.as_mut().poll(cx).is_ready() {
+            return Poll::Ready(TunnelEvent::LivenessTimeout);
+        }
+        if cancel_token.is_cancelled() {
+            return Poll::Ready(TunnelEvent::Cancelled);
+        }
+
+        // 6. SELF-WAKE: only when flush is complete AND we have work.
+        //    When flush is Pending, the TCP write-readiness waker will notify us.
+        //    CRITICAL: do NOT self-wake when flush_needed — poll_write always returns
+        //    Ready (TLS buffers in-memory), so self-waking causes a tight spin loop
+        //    that fills the TLS session buffer unboundedly -> OOM -> ECONNRESET.
+        if !self.write.flush_needed && (got_new || self.write.has_work()) {
+            cx.waker().wake_by_ref();
+        }
+
+        Poll::Pending
+    }
+
+    pub fn into_inner(self) -> S {
+        self.stream
+    }
+}
+
 #[cfg(test)]
 mod tests {
    use super::*;

+    #[test]
+    fn test_encode_frame_header() {
+        let payload = b"hello";
+        let mut buf = vec![0u8; FRAME_HEADER_SIZE + payload.len()];
+        buf[FRAME_HEADER_SIZE..].copy_from_slice(payload);
+        encode_frame_header(&mut buf, 42, FRAME_DATA, payload.len());
+        assert_eq!(buf, &encode_frame(42, FRAME_DATA, payload)[..]);
+    }
+
+    #[test]
+    fn test_encode_frame_header_empty_payload() {
+        let mut buf = vec![0u8; FRAME_HEADER_SIZE];
+        encode_frame_header(&mut buf, 99, FRAME_CLOSE, 0);
+        assert_eq!(buf, &encode_frame(99, FRAME_CLOSE, &[])[..]);
+    }
+
    #[test]
    fn test_encode_frame() {
        let data = b"hello";
@@ -304,7 +741,7 @@ mod tests {
            let frame = reader.next_frame().await.unwrap().unwrap();
            assert_eq!(frame.stream_id, i as u32);
            assert_eq!(frame.frame_type, ft);
-            assert_eq!(frame.payload, format!("payload_{}", i).as_bytes());
+            assert_eq!(&frame.payload[..], format!("payload_{}", i).as_bytes());
        }

        assert!(reader.next_frame().await.unwrap().is_none());
@@ -313,7 +750,7 @@ mod tests {
    #[tokio::test]
    async fn test_frame_reader_zero_length_payload() {
        let data = encode_frame(42, FRAME_CLOSE, &[]);
-        let cursor = std::io::Cursor::new(data);
+        let cursor = std::io::Cursor::new(data.to_vec());
        let mut reader = FrameReader::new(cursor);

        let frame = reader.next_frame().await.unwrap().unwrap();
@@ -336,4 +773,101 @@ mod tests {
        assert_eq!(&pong[0..4], &0u32.to_be_bytes());
        assert_eq!(pong.len(), FRAME_HEADER_SIZE);
    }
+
+    // --- compute_window_for_stream_count tests ---
+
+    #[test]
+    fn test_adaptive_window_zero_streams() {
+        // 0 streams treated as 1: 200MB/1 -> clamped to 4MB max
+        assert_eq!(compute_window_for_stream_count(0), INITIAL_STREAM_WINDOW);
+    }
+
+    #[test]
+    fn test_adaptive_window_one_stream() {
+        assert_eq!(compute_window_for_stream_count(1), INITIAL_STREAM_WINDOW);
+    }
+
+    #[test]
+    fn test_adaptive_window_50_streams_full() {
+        // 200MB/50 = 4MB = exactly INITIAL_STREAM_WINDOW
+        assert_eq!(compute_window_for_stream_count(50), INITIAL_STREAM_WINDOW);
+    }
+
+    #[test]
+    fn test_adaptive_window_51_streams_starts_scaling() {
+        // 200MB/51 < 4MB — first value below max
+        let w = compute_window_for_stream_count(51);
+        assert!(w < INITIAL_STREAM_WINDOW);
+        assert_eq!(w, (200 * 1024 * 1024u64 / 51) as u32);
+    }
+
+    #[test]
+    fn test_adaptive_window_100_streams() {
+        // 200MB/100 = 2MB
+        assert_eq!(compute_window_for_stream_count(100), 2 * 1024 * 1024);
+    }
+
+    #[test]
+    fn test_adaptive_window_200_streams_at_floor() {
+        // 200MB/200 = 1MB = exactly the floor
+        assert_eq!(compute_window_for_stream_count(200), 1 * 1024 * 1024);
+    }
+
+    #[test]
+    fn test_adaptive_window_500_streams_clamped() {
+        // 200MB/500 = 0.4MB -> clamped up to 1MB floor
+        assert_eq!(compute_window_for_stream_count(500), 1 * 1024 * 1024);
+    }
+
+    #[test]
+    fn test_adaptive_window_max_u32() {
+        // Extreme: u32::MAX streams -> tiny value -> clamped to 1MB
+        assert_eq!(compute_window_for_stream_count(u32::MAX), 1 * 1024 * 1024);
+    }
+
+    #[test]
+    fn test_adaptive_window_monotonically_decreasing() {
+        let mut prev = compute_window_for_stream_count(1);
+        for n in [2, 10, 50, 51, 100, 200, 500, 1000] {
+            let w = compute_window_for_stream_count(n);
+            assert!(w <= prev, "window increased from {} to {} at n={}", prev, w, n);
+            prev = w;
+        }
+    }
+
+    #[test]
+    fn test_adaptive_window_total_budget_bounded() {
+        // active x per_stream_window should never exceed 200MB (+ clamp overhead for high N)
+        for n in [1, 10, 50, 100, 200] {
+            let w = compute_window_for_stream_count(n);
+            let total = w as u64 * n as u64;
+            assert!(total <= 200 * 1024 * 1024, "total {}MB exceeds budget at n={}", total / (1024*1024), n);
+        }
+    }
+
+    // --- encode/decode window_update roundtrip ---
+
+    #[test]
+    fn test_window_update_roundtrip() {
+        for &increment in &[0u32, 1, 64 * 1024, INITIAL_STREAM_WINDOW, MAX_WINDOW_SIZE, u32::MAX] {
+            let frame = encode_window_update(42, FRAME_WINDOW_UPDATE, increment);
+            assert_eq!(frame[4], FRAME_WINDOW_UPDATE);
+            let decoded = decode_window_update(&frame[FRAME_HEADER_SIZE..]);
+            assert_eq!(decoded, Some(increment));
+        }
+    }
+
+    #[test]
+    fn test_window_update_back_roundtrip() {
+        let frame = encode_window_update(7, FRAME_WINDOW_UPDATE_BACK, 1234567);
+        assert_eq!(frame[4], FRAME_WINDOW_UPDATE_BACK);
+        assert_eq!(decode_window_update(&frame[FRAME_HEADER_SIZE..]), Some(1234567));
+    }
+
+    #[test]
+    fn test_decode_window_update_malformed() {
+        assert_eq!(decode_window_update(&[]), None);
+        assert_eq!(decode_window_update(&[0, 0, 0]), None);
+        assert_eq!(decode_window_update(&[0, 0, 0, 0, 0]), None);
+    }
 }
--- a/test/test.flowcontrol.node.ts
+++ b/test/test.flowcontrol.node.ts
@@ -0,0 +1,475 @@
+import { expect, tap } from '@push.rocks/tapbundle';
+import * as net from 'net';
+import * as crypto from 'crypto';
+import { RemoteIngressHub, RemoteIngressEdge } from '../ts/index.js';
+
+// ---------------------------------------------------------------------------
+// Helpers
+// ---------------------------------------------------------------------------
+
+/** Find N free ports by binding to port 0 and collecting OS-assigned ports. */
+async function findFreePorts(count: number): Promise<number[]> {
+  const servers: net.Server[] = [];
+  const ports: number[] = [];
+  for (let i = 0; i < count; i++) {
+    const server = net.createServer();
+    await new Promise<void>((resolve) => server.listen(0, '127.0.0.1', resolve));
+    ports.push((server.address() as net.AddressInfo).port);
+    servers.push(server);
+  }
+  await Promise.all(servers.map((s) => new Promise<void>((resolve) => s.close(() => resolve()))));
+  return ports;
+}
+
+type TrackingServer = net.Server & { destroyAll: () => void };
+
+/** Start a TCP echo server that tracks connections for force-close. */
+function startEchoServer(port: number, host: string): Promise<TrackingServer> {
+  return new Promise((resolve, reject) => {
+    const connections = new Set<net.Socket>();
+    const server = net.createServer((socket) => {
+      connections.add(socket);
+      socket.on('close', () => connections.delete(socket));
+
+      // Skip PROXY protocol v1 header line before echoing
+      let proxyHeaderParsed = false;
+      let pendingBuf = Buffer.alloc(0);
+      socket.on('data', (data: Buffer) => {
+        if (!proxyHeaderParsed) {
+          pendingBuf = Buffer.concat([pendingBuf, data]);
+          const idx = pendingBuf.indexOf('\r\n');
+          if (idx !== -1) {
+            proxyHeaderParsed = true;
+            const remainder = pendingBuf.subarray(idx + 2);
+            if (remainder.length > 0) {
+              socket.write(remainder);
+            }
+          }
+          return;
+        }
+        socket.write(data);
+      });
+      socket.on('error', () => {});
+    }) as TrackingServer;
+
+    server.destroyAll = () => {
+      for (const conn of connections) conn.destroy();
+      connections.clear();
+    };
+
+    server.on('error', reject);
+    server.listen(port, host, () => resolve(server));
+  });
+}
+
+/**
+ * Start a server that sends a large response immediately on first data received.
+ * Does NOT wait for end (the tunnel protocol has no half-close).
+ * On receiving first data chunk after PROXY header, sends responseSize bytes then closes.
+ */
+function startLargeResponseServer(port: number, host: string, responseSize: number): Promise<TrackingServer> {
+  return new Promise((resolve, reject) => {
+    const connections = new Set<net.Socket>();
+    const server = net.createServer((socket) => {
+      connections.add(socket);
+      socket.on('close', () => connections.delete(socket));
+
+      let proxyHeaderParsed = false;
+      let pendingBuf = Buffer.alloc(0);
+      let responseSent = false;
+
+      socket.on('data', (data: Buffer) => {
+        if (!proxyHeaderParsed) {
+          pendingBuf = Buffer.concat([pendingBuf, data]);
+          const idx = pendingBuf.indexOf('\r\n');
+          if (idx !== -1) {
+            proxyHeaderParsed = true;
+            const remainder = pendingBuf.subarray(idx + 2);
+            if (remainder.length > 0 && !responseSent) {
+              responseSent = true;
+              sendLargeResponse(socket, responseSize);
+            }
+          }
+          return;
+        }
+        if (!responseSent) {
+          responseSent = true;
+          sendLargeResponse(socket, responseSize);
+        }
+      });
+      socket.on('error', () => {});
+    }) as TrackingServer;
+
+    server.destroyAll = () => {
+      for (const conn of connections) conn.destroy();
+      connections.clear();
+    };
+
+    server.on('error', reject);
+    server.listen(port, host, () => resolve(server));
+  });
+}
+
+function sendLargeResponse(socket: net.Socket, totalBytes: number) {
+  const chunkSize = 32 * 1024;
+  let sent = 0;
+  const writeChunk = () => {
+    while (sent < totalBytes) {
+      const toWrite = Math.min(chunkSize, totalBytes - sent);
+      // Use a deterministic pattern for verification
+      const chunk = Buffer.alloc(toWrite, (sent % 256) & 0xff);
+      const canContinue = socket.write(chunk);
+      sent += toWrite;
+      if (!canContinue) {
+        socket.once('drain', writeChunk);
+        return;
+      }
+    }
+    socket.end();
+  };
+  writeChunk();
+}
+
+/** Force-close a server: destroy all connections, then close. */
+async function forceCloseServer(server: TrackingServer): Promise<void> {
+  server.destroyAll();
+  await new Promise<void>((resolve) => server.close(() => resolve()));
+}
+
+interface TestTunnel {
+  hub: RemoteIngressHub;
+  edge: RemoteIngressEdge;
+  edgePort: number;
+  cleanup: () => Promise<void>;
+}
+
+/**
+ * Start a full hub + edge tunnel.
+ * Edge binds to 127.0.0.1, upstream server binds to 127.0.0.2.
+ * Hub targetHost = 127.0.0.2 so hub -> upstream doesn't loop back to edge.
+ */
+async function startTunnel(edgePort: number, hubPort: number): Promise<TestTunnel> {
+  const hub = new RemoteIngressHub();
+  const edge = new RemoteIngressEdge();
+
+  await hub.start({
+    tunnelPort: hubPort,
+    targetHost: '127.0.0.2',
+  });
+
+  await hub.updateAllowedEdges([
+    { id: 'test-edge', secret: 'test-secret', listenPorts: [edgePort] },
+  ]);
+
+  const connectedPromise = new Promise<void>((resolve, reject) => {
+    const timeout = setTimeout(() => reject(new Error('Edge did not connect within 10s')), 10000);
+    edge.once('tunnelConnected', () => {
+      clearTimeout(timeout);
+      resolve();
+    });
+  });
+
+  await edge.start({
+    hubHost: '127.0.0.1',
+    hubPort,
+    edgeId: 'test-edge',
+    secret: 'test-secret',
+    bindAddress: '127.0.0.1',
+  });
+
+  await connectedPromise;
+  await new Promise((resolve) => setTimeout(resolve, 500));
+
+  return {
+    hub,
+    edge,
+    edgePort,
+    cleanup: async () => {
+      await edge.stop();
+      await hub.stop();
+    },
+  };
+}
+
+/**
+ * Send data through the tunnel and collect the echoed response.
+ */
+function sendAndReceive(port: number, data: Buffer, timeoutMs = 30000): Promise<Buffer> {
+  return new Promise((resolve, reject) => {
+    const chunks: Buffer[] = [];
+    let totalReceived = 0;
+    const expectedLength = data.length;
+    let settled = false;
+
+    const client = net.createConnection({ host: '127.0.0.1', port }, () => {
+      client.write(data);
+      client.end();
+    });
+
+    const timer = setTimeout(() => {
+      if (!settled) {
+        settled = true;
+        client.destroy();
+        reject(new Error(`Timeout after ${timeoutMs}ms — received ${totalReceived}/${expectedLength} bytes`));
+      }
+    }, timeoutMs);
+
+    client.on('data', (chunk: Buffer) => {
+      chunks.push(chunk);
+      totalReceived += chunk.length;
+      if (totalReceived >= expectedLength && !settled) {
+        settled = true;
+        clearTimeout(timer);
+        client.destroy();
+        resolve(Buffer.concat(chunks));
+      }
+    });
+
+    client.on('end', () => {
+      if (!settled) {
+        settled = true;
+        clearTimeout(timer);
+        resolve(Buffer.concat(chunks));
+      }
+    });
+
+    client.on('error', (err) => {
+      if (!settled) {
+        settled = true;
+        clearTimeout(timer);
+        reject(err);
+      }
+    });
+  });
+}
+
+/**
+ * Connect to the tunnel, send a small request, and collect a large response.
+ * Does NOT call end() — the tunnel has no half-close.
+ * Instead, collects until expectedResponseSize bytes arrive.
+ */
+function sendAndReceiveLarge(
+  port: number,
+  data: Buffer,
+  expectedResponseSize: number,
+  timeoutMs = 60000,
+): Promise<Buffer> {
+  return new Promise((resolve, reject) => {
+    const chunks: Buffer[] = [];
+    let totalReceived = 0;
+    let settled = false;
+
+    const client = net.createConnection({ host: '127.0.0.1', port }, () => {
+      client.write(data);
+      // Do NOT call client.end() — the server will respond immediately
+      // and the tunnel CLOSE will happen when the download finishes
+    });
+
+    const timer = setTimeout(() => {
+      if (!settled) {
+        settled = true;
+        client.destroy();
+        reject(new Error(`Timeout after ${timeoutMs}ms — received ${totalReceived}/${expectedResponseSize} bytes`));
+      }
+    }, timeoutMs);
+
+    client.on('data', (chunk: Buffer) => {
+      chunks.push(chunk);
+      totalReceived += chunk.length;
+      if (totalReceived >= expectedResponseSize && !settled) {
+        settled = true;
+        clearTimeout(timer);
+        client.destroy();
+        resolve(Buffer.concat(chunks));
+      }
+    });
+
+    client.on('end', () => {
+      if (!settled) {
+        settled = true;
+        clearTimeout(timer);
+        resolve(Buffer.concat(chunks));
+      }
+    });
+
+    client.on('error', (err) => {
+      if (!settled) {
+        settled = true;
+        clearTimeout(timer);
+        reject(err);
+      }
+    });
+  });
+}
+
+function sha256(buf: Buffer): string {
+  return crypto.createHash('sha256').update(buf).digest('hex');
+}
+
+// ---------------------------------------------------------------------------
+// Tests
+// ---------------------------------------------------------------------------
+
+let tunnel: TestTunnel;
+let echoServer: TrackingServer;
+let hubPort: number;
+let edgePort: number;
+
+tap.test('setup: start echo server and tunnel', async () => {
+  [hubPort, edgePort] = await findFreePorts(2);
+
+  echoServer = await startEchoServer(edgePort, '127.0.0.2');
+  tunnel = await startTunnel(edgePort, hubPort);
+
+  expect(tunnel.hub.running).toBeTrue();
+});
+
+tap.test('single stream: 32MB transfer exceeding initial 4MB window (multiple refills)', async () => {
+  const size = 32 * 1024 * 1024;
+  const data = crypto.randomBytes(size);
+  const expectedHash = sha256(data);
+
+  const received = await sendAndReceive(edgePort, data, 60000);
+
+  expect(received.length).toEqual(size);
+  expect(sha256(received)).toEqual(expectedHash);
+});
+
+tap.test('200 concurrent streams with 64KB each', async () => {
+  const streamCount = 200;
+  const payloadSize = 64 * 1024;
+
+  const promises = Array.from({ length: streamCount }, () => {
+    const data = crypto.randomBytes(payloadSize);
+    const hash = sha256(data);
+    return sendAndReceive(edgePort, data, 30000).then((received) => ({
+      sent: hash,
+      received: sha256(received),
+      sizeOk: received.length === payloadSize,
+    }));
+  });
+
+  const results = await Promise.all(promises);
+  const failures = results.filter((r) => !r.sizeOk || r.sent !== r.received);
+
+  expect(failures.length).toEqual(0);
+});
+
+tap.test('512 concurrent streams at minimum window boundary (16KB each)', async () => {
+  const streamCount = 512;
+  const payloadSize = 16 * 1024;
+
+  const promises = Array.from({ length: streamCount }, () => {
+    const data = crypto.randomBytes(payloadSize);
+    const hash = sha256(data);
+    return sendAndReceive(edgePort, data, 60000).then((received) => ({
+      sent: hash,
+      received: sha256(received),
+      sizeOk: received.length === payloadSize,
+    }));
+  });
+
+  const results = await Promise.all(promises);
+  const failures = results.filter((r) => !r.sizeOk || r.sent !== r.received);
+
+  expect(failures.length).toEqual(0);
+});
+
+tap.test('asymmetric transfer: 4KB request -> 4MB response', async () => {
+  // Swap to large-response server
+  await forceCloseServer(echoServer);
+  const responseSize = 4 * 1024 * 1024; // 4 MB
+  const largeServer = await startLargeResponseServer(edgePort, '127.0.0.2', responseSize);
+
+  try {
+    const requestData = crypto.randomBytes(4 * 1024); // 4 KB
+    const received = await sendAndReceiveLarge(edgePort, requestData, responseSize, 60000);
+    expect(received.length).toEqual(responseSize);
+  } finally {
+    // Always restore echo server even on failure
+    await forceCloseServer(largeServer);
+    echoServer = await startEchoServer(edgePort, '127.0.0.2');
+  }
+});
+
+tap.test('100 streams x 1MB each (100MB total exceeding 200MB budget)', async () => {
+  const streamCount = 100;
+  const payloadSize = 1 * 1024 * 1024;
+
+  const promises = Array.from({ length: streamCount }, () => {
+    const data = crypto.randomBytes(payloadSize);
+    const hash = sha256(data);
+    return sendAndReceive(edgePort, data, 120000).then((received) => ({
+      sent: hash,
+      received: sha256(received),
+      sizeOk: received.length === payloadSize,
+    }));
+  });
+
+  const results = await Promise.all(promises);
+  const failures = results.filter((r) => !r.sizeOk || r.sent !== r.received);
+
+  expect(failures.length).toEqual(0);
+});
+
+tap.test('active stream counter tracks concurrent connections', async () => {
+  const N = 50;
+
+  // Open N connections and keep them alive (send data but don't close)
+  const sockets: net.Socket[] = [];
+  const connectPromises = Array.from({ length: N }, () => {
+    return new Promise<net.Socket>((resolve, reject) => {
+      const sock = net.createConnection({ host: '127.0.0.1', port: edgePort }, () => {
+        resolve(sock);
+      });
+      sock.on('error', () => {});
+      setTimeout(() => reject(new Error('connect timeout')), 5000);
+    });
+  });
+
+  const connected = await Promise.all(connectPromises);
+  sockets.push(...connected);
+
+  // Brief delay for stream registration to propagate
+  await new Promise((resolve) => setTimeout(resolve, 500));
+
+  // Verify the edge reports >= N active streams.
+  // This counter is the input to compute_window_for_stream_count(),
+  // so its accuracy determines whether adaptive window sizing is correct.
+  const status = await tunnel.edge.getStatus();
+  expect(status.activeStreams).toBeGreaterThanOrEqual(N);
+
+  // Clean up: destroy all sockets (the tunnel's 300s stream timeout will handle cleanup)
+  for (const sock of sockets) {
+    sock.destroy();
+  }
+});
+
+tap.test('50 streams x 2MB each (forces multiple window refills per stream)', async () => {
+  // At 50 concurrent streams: adaptive window = 200MB/50 = 4MB per stream
+  // Each stream sends 2MB → needs ~3 WINDOW_UPDATE refill cycles per stream
+  const streamCount = 50;
+  const payloadSize = 2 * 1024 * 1024;
+
+  const promises = Array.from({ length: streamCount }, () => {
+    const data = crypto.randomBytes(payloadSize);
+    const hash = sha256(data);
+    return sendAndReceive(edgePort, data, 120000).then((received) => ({
+      sent: hash,
+      received: sha256(received),
+      sizeOk: received.length === payloadSize,
+    }));
+  });
+
+  const results = await Promise.all(promises);
+  const failures = results.filter((r) => !r.sizeOk || r.sent !== r.received);
+
+  expect(failures.length).toEqual(0);
+});
+
+tap.test('teardown: stop tunnel and echo server', async () => {
+  await tunnel.cleanup();
+  await forceCloseServer(echoServer);
+});
+
+export default tap.start();
--- a/test/test.loadtest.node.ts
+++ b/test/test.loadtest.node.ts
@@ -0,0 +1,402 @@
+import { expect, tap } from '@push.rocks/tapbundle';
+import * as net from 'net';
+import * as stream from 'stream';
+import * as crypto from 'crypto';
+import { RemoteIngressHub, RemoteIngressEdge } from '../ts/index.js';
+
+// ---------------------------------------------------------------------------
+// Helpers (self-contained — same patterns as test.flowcontrol.node.ts)
+// ---------------------------------------------------------------------------
+
+async function findFreePorts(count: number): Promise<number[]> {
+  const servers: net.Server[] = [];
+  const ports: number[] = [];
+  for (let i = 0; i < count; i++) {
+    const server = net.createServer();
+    await new Promise<void>((resolve) => server.listen(0, '127.0.0.1', resolve));
+    ports.push((server.address() as net.AddressInfo).port);
+    servers.push(server);
+  }
+  await Promise.all(servers.map((s) => new Promise<void>((resolve) => s.close(() => resolve()))));
+  return ports;
+}
+
+type TrackingServer = net.Server & { destroyAll: () => void };
+
+function startEchoServer(port: number, host: string): Promise<TrackingServer> {
+  return new Promise((resolve, reject) => {
+    const connections = new Set<net.Socket>();
+    const server = net.createServer((socket) => {
+      connections.add(socket);
+      socket.on('close', () => connections.delete(socket));
+      let proxyHeaderParsed = false;
+      let pendingBuf = Buffer.alloc(0);
+      socket.on('data', (data: Buffer) => {
+        if (!proxyHeaderParsed) {
+          pendingBuf = Buffer.concat([pendingBuf, data]);
+          const idx = pendingBuf.indexOf('\r\n');
+          if (idx !== -1) {
+            proxyHeaderParsed = true;
+            const remainder = pendingBuf.subarray(idx + 2);
+            if (remainder.length > 0) socket.write(remainder);
+          }
+          return;
+        }
+        socket.write(data);
+      });
+      socket.on('error', () => {});
+    }) as TrackingServer;
+    server.destroyAll = () => {
+      for (const conn of connections) conn.destroy();
+      connections.clear();
+    };
+    server.on('error', reject);
+    server.listen(port, host, () => resolve(server));
+  });
+}
+
+function sendAndReceive(port: number, data: Buffer, timeoutMs = 30000): Promise<Buffer> {
+  return new Promise((resolve, reject) => {
+    const chunks: Buffer[] = [];
+    let totalReceived = 0;
+    const expectedLength = data.length;
+    let settled = false;
+
+    const client = net.createConnection({ host: '127.0.0.1', port }, () => {
+      client.write(data);
+      client.end();
+    });
+
+    const timer = setTimeout(() => {
+      if (!settled) {
+        settled = true;
+        client.destroy();
+        reject(new Error(`Timeout after ${timeoutMs}ms — received ${totalReceived}/${expectedLength} bytes`));
+      }
+    }, timeoutMs);
+
+    client.on('data', (chunk: Buffer) => {
+      chunks.push(chunk);
+      totalReceived += chunk.length;
+      if (totalReceived >= expectedLength && !settled) {
+        settled = true;
+        clearTimeout(timer);
+        client.destroy();
+        resolve(Buffer.concat(chunks));
+      }
+    });
+
+    client.on('end', () => {
+      if (!settled) {
+        settled = true;
+        clearTimeout(timer);
+        resolve(Buffer.concat(chunks));
+      }
+    });
+
+    client.on('error', (err) => {
+      if (!settled) {
+        settled = true;
+        clearTimeout(timer);
+        reject(err);
+      }
+    });
+  });
+}
+
+function sha256(buf: Buffer): string {
+  return crypto.createHash('sha256').update(buf).digest('hex');
+}
+
+// ---------------------------------------------------------------------------
+// Throttle Proxy: rate-limits TCP traffic between edge and hub
+// ---------------------------------------------------------------------------
+
+class ThrottleTransform extends stream.Transform {
+  private bytesPerSec: number;
+  private bucket: number;
+  private lastRefill: number;
+  private destroyed_: boolean = false;
+
+  constructor(bytesPerSecond: number) {
+    super();
+    this.bytesPerSec = bytesPerSecond;
+    this.bucket = bytesPerSecond;
+    this.lastRefill = Date.now();
+  }
+
+  _transform(chunk: Buffer, _encoding: BufferEncoding, callback: stream.TransformCallback) {
+    if (this.destroyed_) return;
+
+    const now = Date.now();
+    const elapsed = (now - this.lastRefill) / 1000;
+    this.bucket = Math.min(this.bytesPerSec, this.bucket + elapsed * this.bytesPerSec);
+    this.lastRefill = now;
+
+    if (chunk.length <= this.bucket) {
+      this.bucket -= chunk.length;
+      callback(null, chunk);
+    } else {
+      // Not enough budget — delay the entire chunk (don't split)
+      const deficit = chunk.length - this.bucket;
+      this.bucket = 0;
+      const delayMs = Math.min((deficit / this.bytesPerSec) * 1000, 1000);
+      setTimeout(() => {
+        if (this.destroyed_) { callback(); return; }
+        this.lastRefill = Date.now();
+        this.bucket = 0;
+        callback(null, chunk);
+      }, delayMs);
+    }
+  }
+
+  _destroy(err: Error | null, callback: (error: Error | null) => void) {
+    this.destroyed_ = true;
+    callback(err);
+  }
+}
+
+interface ThrottleProxy {
+  server: net.Server;
+  close: () => Promise<void>;
+}
+
+async function startThrottleProxy(
+  listenPort: number,
+  targetHost: string,
+  targetPort: number,
+  bytesPerSecond: number,
+): Promise<ThrottleProxy> {
+  const connections = new Set<net.Socket>();
+  const server = net.createServer((clientSock) => {
+    connections.add(clientSock);
+    const upstream = net.createConnection({ host: targetHost, port: targetPort });
+    connections.add(upstream);
+
+    const throttleUp = new ThrottleTransform(bytesPerSecond);
+    const throttleDown = new ThrottleTransform(bytesPerSecond);
+
+    clientSock.pipe(throttleUp).pipe(upstream);
+    upstream.pipe(throttleDown).pipe(clientSock);
+
+    let cleaned = false;
+    const cleanup = (source: string, err?: Error) => {
+      if (cleaned) return;
+      cleaned = true;
+      if (err) {
+        console.error(`[ThrottleProxy] cleanup triggered by ${source}: ${err.message}`);
+      } else {
+        console.error(`[ThrottleProxy] cleanup triggered by ${source} (no error)`);
+      }
+      console.error(`[ThrottleProxy] stack:`, new Error().stack);
+      throttleUp.destroy();
+      throttleDown.destroy();
+      clientSock.destroy();
+      upstream.destroy();
+      connections.delete(clientSock);
+      connections.delete(upstream);
+    };
+    clientSock.on('error', (e) => cleanup('clientSock.error', e));
+    upstream.on('error', (e) => cleanup('upstream.error', e));
+    throttleUp.on('error', (e) => cleanup('throttleUp.error', e));
+    throttleDown.on('error', (e) => cleanup('throttleDown.error', e));
+    clientSock.on('close', () => cleanup('clientSock.close'));
+    upstream.on('close', () => cleanup('upstream.close'));
+  });
+
+  await new Promise<void>((resolve) => server.listen(listenPort, '127.0.0.1', resolve));
+  return {
+    server,
+    close: async () => {
+      for (const c of connections) c.destroy();
+      connections.clear();
+      await new Promise<void>((resolve) => server.close(() => resolve()));
+    },
+  };
+}
+
+// ---------------------------------------------------------------------------
+// Test state
+// ---------------------------------------------------------------------------
+
+let hub: RemoteIngressHub;
+let edge: RemoteIngressEdge;
+let echoServer: TrackingServer;
+let throttle: ThrottleProxy;
+let hubPort: number;
+let proxyPort: number;
+let edgePort: number;
+
+// ---------------------------------------------------------------------------
+// Tests
+// ---------------------------------------------------------------------------
+
+tap.test('setup: start throttled tunnel (100 Mbit/s)', async () => {
+  [hubPort, proxyPort, edgePort] = await findFreePorts(3);
+
+  echoServer = await startEchoServer(edgePort, '127.0.0.2');
+
+  // Throttle proxy: edge → proxy → hub at 100 Mbit/s (12.5 MB/s)
+  throttle = await startThrottleProxy(proxyPort, '127.0.0.1', hubPort, 12.5 * 1024 * 1024);
+
+  hub = new RemoteIngressHub();
+  edge = new RemoteIngressEdge();
+
+  await hub.start({ tunnelPort: hubPort, targetHost: '127.0.0.2' });
+  await hub.updateAllowedEdges([
+    { id: 'test-edge', secret: 'test-secret', listenPorts: [edgePort] },
+  ]);
+
+  const connectedPromise = new Promise<void>((resolve, reject) => {
+    const timeout = setTimeout(() => reject(new Error('Edge did not connect within 10s')), 10000);
+    edge.once('tunnelConnected', () => {
+      clearTimeout(timeout);
+      resolve();
+    });
+  });
+
+  // Edge connects through throttle proxy
+  await edge.start({
+    hubHost: '127.0.0.1',
+    hubPort: proxyPort,
+    edgeId: 'test-edge',
+    secret: 'test-secret',
+    bindAddress: '127.0.0.1',
+  });
+
+  await connectedPromise;
+  await new Promise((resolve) => setTimeout(resolve, 500));
+
+  const status = await edge.getStatus();
+  expect(status.connected).toBeTrue();
+});
+
+tap.test('throttled: 5 streams x 20MB each through 100Mbit tunnel', async () => {
+  const streamCount = 5;
+  const payloadSize = 20 * 1024 * 1024; // 20MB per stream = 100MB total round-trip
+
+  const payloads = Array.from({ length: streamCount }, () => crypto.randomBytes(payloadSize));
+  const promises = payloads.map((data) => {
+    const hash = sha256(data);
+    return sendAndReceive(edgePort, data, 300000).then((received) => ({
+      sent: hash,
+      received: sha256(received),
+      sizeOk: received.length === payloadSize,
+    }));
+  });
+
+  const results = await Promise.all(promises);
+  const failures = results.filter((r) => !r.sizeOk || r.sent !== r.received);
+  expect(failures.length).toEqual(0);
+
+  const status = await edge.getStatus();
+  expect(status.connected).toBeTrue();
+});
+
+tap.test('throttled: slow consumer with 20MB does not kill other streams', async () => {
+  // Open a connection that creates download-direction backpressure:
+  // send 20MB but DON'T read the response — client TCP receive buffer fills
+  const slowSock = net.createConnection({ host: '127.0.0.1', port: edgePort });
+  await new Promise<void>((resolve) => slowSock.on('connect', resolve));
+  const slowData = crypto.randomBytes(20 * 1024 * 1024);
+  slowSock.write(slowData);
+  slowSock.end();
+  // Don't read — backpressure builds on the download path
+
+  // Wait for backpressure to develop
+  await new Promise((r) => setTimeout(r, 2000));
+
+  // Meanwhile, 5 normal echo streams with 20MB each must complete
+  const payload = crypto.randomBytes(20 * 1024 * 1024);
+  const hash = sha256(payload);
+  const promises = Array.from({ length: 5 }, () =>
+    sendAndReceive(edgePort, payload, 300000).then((r) => ({
+      hash: sha256(r),
+      sizeOk: r.length === payload.length,
+    }))
+  );
+  const results = await Promise.all(promises);
+  const failures = results.filter((r) => !r.sizeOk || r.hash !== hash);
+  expect(failures.length).toEqual(0);
+
+  // Tunnel still alive
+  const status = await edge.getStatus();
+  expect(status.connected).toBeTrue();
+
+  slowSock.destroy();
+});
+
+tap.test('throttled: rapid churn — 3 x 20MB long + 50 x 1MB short streams', async () => {
+  // 3 long streams (20MB each) running alongside 50 short streams (1MB each)
+  const longPayload = crypto.randomBytes(20 * 1024 * 1024);
+  const longHash = sha256(longPayload);
+  const longPromises = Array.from({ length: 3 }, () =>
+    sendAndReceive(edgePort, longPayload, 300000).then((r) => ({
+      hash: sha256(r),
+      sizeOk: r.length === longPayload.length,
+    }))
+  );
+
+  const shortPayload = crypto.randomBytes(1024 * 1024);
+  const shortHash = sha256(shortPayload);
+  const shortPromises = Array.from({ length: 50 }, () =>
+    sendAndReceive(edgePort, shortPayload, 300000).then((r) => ({
+      hash: sha256(r),
+      sizeOk: r.length === shortPayload.length,
+    }))
+  );
+
+  const [longResults, shortResults] = await Promise.all([
+    Promise.all(longPromises),
+    Promise.all(shortPromises),
+  ]);
+
+  const longFails = longResults.filter((r) => !r.sizeOk || r.hash !== longHash);
+  const shortFails = shortResults.filter((r) => !r.sizeOk || r.hash !== shortHash);
+  expect(longFails.length).toEqual(0);
+  expect(shortFails.length).toEqual(0);
+
+  const status = await edge.getStatus();
+  expect(status.connected).toBeTrue();
+});
+
+tap.test('throttled: 3 burst waves of 5 streams x 20MB each', async () => {
+  for (let wave = 0; wave < 3; wave++) {
+    const streamCount = 5;
+    const payloadSize = 20 * 1024 * 1024; // 20MB per stream = 100MB per wave
+
+    const promises = Array.from({ length: streamCount }, () => {
+      const data = crypto.randomBytes(payloadSize);
+      return sendAndReceive(edgePort, data, 300000).then((r) => r.length === payloadSize);
+    });
+
+    const results = await Promise.all(promises);
+    const ok = results.filter(Boolean).length;
+    expect(ok).toEqual(streamCount);
+
+    // Brief pause between waves
+    await new Promise((r) => setTimeout(r, 500));
+
+    const status = await edge.getStatus();
+    expect(status.connected).toBeTrue();
+  }
+});
+
+tap.test('throttled: tunnel still works after all load tests', async () => {
+  const data = crypto.randomBytes(1024);
+  const hash = sha256(data);
+  const received = await sendAndReceive(edgePort, data, 30000);
+  expect(sha256(received)).toEqual(hash);
+
+  const status = await edge.getStatus();
+  expect(status.connected).toBeTrue();
+});
+
+tap.test('teardown: stop tunnel', async () => {
+  await edge.stop();
+  await hub.stop();
+  if (throttle) await throttle.close();
+  await new Promise<void>((resolve) => echoServer.close(() => resolve()));
+});
+
+export default tap.start();
--- a/test/test.quic.node.ts
+++ b/test/test.quic.node.ts
@@ -0,0 +1,283 @@
+import { expect, tap } from '@push.rocks/tapbundle';
+import * as net from 'net';
+import * as crypto from 'crypto';
+import { RemoteIngressHub, RemoteIngressEdge } from '../ts/index.js';
+
+// ---------------------------------------------------------------------------
+// Helpers (same patterns as test.flowcontrol.node.ts)
+// ---------------------------------------------------------------------------
+
+async function findFreePorts(count: number): Promise<number[]> {
+  const servers: net.Server[] = [];
+  const ports: number[] = [];
+  for (let i = 0; i < count; i++) {
+    const server = net.createServer();
+    await new Promise<void>((resolve) => server.listen(0, '127.0.0.1', resolve));
+    ports.push((server.address() as net.AddressInfo).port);
+    servers.push(server);
+  }
+  await Promise.all(servers.map((s) => new Promise<void>((resolve) => s.close(() => resolve()))));
+  return ports;
+}
+
+type TrackingServer = net.Server & { destroyAll: () => void };
+
+function startEchoServer(port: number, host: string): Promise<TrackingServer> {
+  return new Promise((resolve, reject) => {
+    const connections = new Set<net.Socket>();
+    const server = net.createServer((socket) => {
+      connections.add(socket);
+      socket.on('close', () => connections.delete(socket));
+      let proxyHeaderParsed = false;
+      let pendingBuf = Buffer.alloc(0);
+      socket.on('data', (data: Buffer) => {
+        if (!proxyHeaderParsed) {
+          pendingBuf = Buffer.concat([pendingBuf, data]);
+          const idx = pendingBuf.indexOf('\r\n');
+          if (idx !== -1) {
+            proxyHeaderParsed = true;
+            const remainder = pendingBuf.subarray(idx + 2);
+            if (remainder.length > 0) socket.write(remainder);
+          }
+          return;
+        }
+        socket.write(data);
+      });
+      socket.on('error', () => {});
+    }) as TrackingServer;
+    server.destroyAll = () => {
+      for (const conn of connections) conn.destroy();
+      connections.clear();
+    };
+    server.on('error', reject);
+    server.listen(port, host, () => resolve(server));
+  });
+}
+
+async function forceCloseServer(server: TrackingServer): Promise<void> {
+  server.destroyAll();
+  await new Promise<void>((resolve) => server.close(() => resolve()));
+}
+
+interface TestTunnel {
+  hub: RemoteIngressHub;
+  edge: RemoteIngressEdge;
+  edgePort: number;
+  cleanup: () => Promise<void>;
+}
+
+/**
+ * Start a full hub + edge tunnel using QUIC transport.
+ * Edge binds to 127.0.0.1, upstream server binds to 127.0.0.2.
+ */
+async function startQuicTunnel(edgePort: number, hubPort: number): Promise<TestTunnel> {
+  const hub = new RemoteIngressHub();
+  const edge = new RemoteIngressEdge();
+
+  await hub.start({
+    tunnelPort: hubPort,
+    targetHost: '127.0.0.2',
+  });
+
+  await hub.updateAllowedEdges([
+    { id: 'test-edge', secret: 'test-secret', listenPorts: [edgePort] },
+  ]);
+
+  const connectedPromise = new Promise<void>((resolve, reject) => {
+    const timeout = setTimeout(() => reject(new Error('QUIC edge did not connect within 10s')), 10000);
+    edge.once('tunnelConnected', () => {
+      clearTimeout(timeout);
+      resolve();
+    });
+  });
+
+  await edge.start({
+    hubHost: '127.0.0.1',
+    hubPort,
+    edgeId: 'test-edge',
+    secret: 'test-secret',
+    bindAddress: '127.0.0.1',
+    transportMode: 'quic',
+  });
+
+  await connectedPromise;
+  await new Promise((resolve) => setTimeout(resolve, 500));
+
+  return {
+    hub,
+    edge,
+    edgePort,
+    cleanup: async () => {
+      await edge.stop();
+      await hub.stop();
+    },
+  };
+}
+
+function sendAndReceive(port: number, data: Buffer, timeoutMs = 30000): Promise<Buffer> {
+  return new Promise((resolve, reject) => {
+    const chunks: Buffer[] = [];
+    let totalReceived = 0;
+    const expectedLength = data.length;
+    let settled = false;
+
+    const client = net.createConnection({ host: '127.0.0.1', port }, () => {
+      client.write(data);
+      client.end();
+    });
+
+    const timer = setTimeout(() => {
+      if (!settled) {
+        settled = true;
+        client.destroy();
+        reject(new Error(`Timeout after ${timeoutMs}ms — received ${totalReceived}/${expectedLength} bytes`));
+      }
+    }, timeoutMs);
+
+    client.on('data', (chunk: Buffer) => {
+      chunks.push(chunk);
+      totalReceived += chunk.length;
+      if (totalReceived >= expectedLength && !settled) {
+        settled = true;
+        clearTimeout(timer);
+        client.destroy();
+        resolve(Buffer.concat(chunks));
+      }
+    });
+
+    client.on('end', () => {
+      if (!settled) {
+        settled = true;
+        clearTimeout(timer);
+        resolve(Buffer.concat(chunks));
+      }
+    });
+
+    client.on('error', (err) => {
+      if (!settled) {
+        settled = true;
+        clearTimeout(timer);
+        reject(err);
+      }
+    });
+  });
+}
+
+function sha256(buf: Buffer): string {
+  return crypto.createHash('sha256').update(buf).digest('hex');
+}
+
+// ---------------------------------------------------------------------------
+// QUIC Transport E2E Tests
+// ---------------------------------------------------------------------------
+
+let tunnel: TestTunnel;
+let echoServer: TrackingServer;
+let hubPort: number;
+let edgePort: number;
+
+tap.test('QUIC setup: start echo server and QUIC tunnel', async () => {
+  [hubPort, edgePort] = await findFreePorts(2);
+
+  echoServer = await startEchoServer(edgePort, '127.0.0.2');
+  tunnel = await startQuicTunnel(edgePort, hubPort);
+
+  expect(tunnel.hub.running).toBeTrue();
+  const status = await tunnel.edge.getStatus();
+  expect(status.connected).toBeTrue();
+});
+
+tap.test('QUIC: single stream echo — 1KB', async () => {
+  const data = crypto.randomBytes(1024);
+  const hash = sha256(data);
+  const received = await sendAndReceive(edgePort, data, 10000);
+  expect(received.length).toEqual(1024);
+  expect(sha256(received)).toEqual(hash);
+});
+
+tap.test('QUIC: single stream echo — 1MB', async () => {
+  const size = 1024 * 1024;
+  const data = crypto.randomBytes(size);
+  const hash = sha256(data);
+  const received = await sendAndReceive(edgePort, data, 30000);
+  expect(received.length).toEqual(size);
+  expect(sha256(received)).toEqual(hash);
+});
+
+tap.test('QUIC: single stream echo — 16MB', async () => {
+  const size = 16 * 1024 * 1024;
+  const data = crypto.randomBytes(size);
+  const hash = sha256(data);
+  const received = await sendAndReceive(edgePort, data, 60000);
+  expect(received.length).toEqual(size);
+  expect(sha256(received)).toEqual(hash);
+});
+
+tap.test('QUIC: 10 concurrent streams x 1MB each', async () => {
+  const streamCount = 10;
+  const payloadSize = 1024 * 1024;
+
+  const promises = Array.from({ length: streamCount }, () => {
+    const data = crypto.randomBytes(payloadSize);
+    const hash = sha256(data);
+    return sendAndReceive(edgePort, data, 30000).then((received) => ({
+      sent: hash,
+      received: sha256(received),
+      sizeOk: received.length === payloadSize,
+    }));
+  });
+
+  const results = await Promise.all(promises);
+  const failures = results.filter((r) => !r.sizeOk || r.sent !== r.received);
+  expect(failures.length).toEqual(0);
+});
+
+tap.test('QUIC: 50 concurrent streams x 64KB each', async () => {
+  const streamCount = 50;
+  const payloadSize = 64 * 1024;
+
+  const promises = Array.from({ length: streamCount }, () => {
+    const data = crypto.randomBytes(payloadSize);
+    const hash = sha256(data);
+    return sendAndReceive(edgePort, data, 30000).then((received) => ({
+      sent: hash,
+      received: sha256(received),
+      sizeOk: received.length === payloadSize,
+    }));
+  });
+
+  const results = await Promise.all(promises);
+  const failures = results.filter((r) => !r.sizeOk || r.sent !== r.received);
+  expect(failures.length).toEqual(0);
+});
+
+tap.test('QUIC: 200 concurrent streams x 16KB each', async () => {
+  const streamCount = 200;
+  const payloadSize = 16 * 1024;
+
+  const promises = Array.from({ length: streamCount }, () => {
+    const data = crypto.randomBytes(payloadSize);
+    const hash = sha256(data);
+    return sendAndReceive(edgePort, data, 60000).then((received) => ({
+      sent: hash,
+      received: sha256(received),
+      sizeOk: received.length === payloadSize,
+    }));
+  });
+
+  const results = await Promise.all(promises);
+  const failures = results.filter((r) => !r.sizeOk || r.sent !== r.received);
+  expect(failures.length).toEqual(0);
+});
+
+tap.test('QUIC: tunnel still connected after all tests', async () => {
+  const status = await tunnel.edge.getStatus();
+  expect(status.connected).toBeTrue();
+});
+
+tap.test('QUIC teardown: stop tunnel and echo server', async () => {
+  await tunnel.cleanup();
+  await forceCloseServer(echoServer);
+});
+
+export default tap.start();
--- a/ts/00_commitinfo_data.ts
+++ b/ts/00_commitinfo_data.ts
@@ -3,6 +3,6 @@
 */
 export const commitinfo = {
  name: '@serve.zone/remoteingress',
-  version: '4.5.5',
+  version: '4.10.0',
  description: 'Edge ingress tunnel for DcRouter - accepts incoming TCP connections at network edge and tunnels them to DcRouter SmartProxy preserving client IP via PROXY protocol v1.'
 }
--- a/ts/classes.remoteingressedge.ts
+++ b/ts/classes.remoteingressedge.ts
@@ -14,6 +14,8 @@ type TEdgeCommands = {
      hubPort: number;
      edgeId: string;
      secret: string;
+      bindAddress?: string;
+      transportMode?: 'tcpTls' | 'quic' | 'quicWithFallback';
    };
    result: { started: boolean };
  };
@@ -38,6 +40,8 @@ export interface IEdgeConfig {
  hubPort?: number;
  edgeId: string;
  secret: string;
+  bindAddress?: string;
+  transportMode?: 'tcpTls' | 'quic' | 'quicWithFallback';
 }

 const MAX_RESTART_ATTEMPTS = 10;
@@ -81,8 +85,10 @@ export class RemoteIngressEdge extends EventEmitter {
    this.bridge.on('management:tunnelConnected', () => {
      this.emit('tunnelConnected');
    });
-    this.bridge.on('management:tunnelDisconnected', () => {
-      this.emit('tunnelDisconnected');
+    this.bridge.on('management:tunnelDisconnected', (data: { reason?: string }) => {
+      const reason = data?.reason ?? 'unknown';
+      console.log(`[RemoteIngressEdge] Tunnel disconnected: ${reason}`);
+      this.emit('tunnelDisconnected', data);
    });
    this.bridge.on('management:publicIpDiscovered', (data: { ip: string }) => {
      this.emit('publicIpDiscovered', data);
@@ -132,6 +138,8 @@ export class RemoteIngressEdge extends EventEmitter {
      hubPort: edgeConfig.hubPort ?? 8443,
      edgeId: edgeConfig.edgeId,
      secret: edgeConfig.secret,
+      ...(edgeConfig.bindAddress ? { bindAddress: edgeConfig.bindAddress } : {}),
+      ...(edgeConfig.transportMode ? { transportMode: edgeConfig.transportMode } : {}),
    });

    this.started = true;
@@ -227,6 +235,8 @@ export class RemoteIngressEdge extends EventEmitter {
        hubPort: this.savedConfig.hubPort ?? 8443,
        edgeId: this.savedConfig.edgeId,
        secret: this.savedConfig.secret,
+        ...(this.savedConfig.bindAddress ? { bindAddress: this.savedConfig.bindAddress } : {}),
+        ...(this.savedConfig.transportMode ? { transportMode: this.savedConfig.transportMode } : {}),
      });

      this.started = true;
--- a/ts/classes.remoteingresshub.ts
+++ b/ts/classes.remoteingresshub.ts
@@ -93,7 +93,9 @@ export class RemoteIngressHub extends EventEmitter {
    this.bridge.on('management:edgeConnected', (data: { edgeId: string; peerAddr: string }) => {
      this.emit('edgeConnected', data);
    });
-    this.bridge.on('management:edgeDisconnected', (data: { edgeId: string }) => {
+    this.bridge.on('management:edgeDisconnected', (data: { edgeId: string; reason?: string }) => {
+      const reason = data?.reason ?? 'unknown';
+      console.log(`[RemoteIngressHub] Edge ${data.edgeId} disconnected: ${reason}`);
      this.emit('edgeDisconnected', data);
    });
    this.bridge.on('management:streamOpened', (data: { edgeId: string; streamId: number }) => {
Author	SHA1	Message	Date
Juergen Kunz	61fa69f108	v4.10.0 Some checks failed Default (tags) / security (push) Failing after 1s Details Default (tags) / test (push) Failing after 0s Details Default (tags) / release (push) Has been skipped Details Default (tags) / metadata (push) Has been skipped Details	2026-03-19 10:44:22 +00:00
Juergen Kunz	6abfd2ff2a	feat(core,edge,hub,transport): add QUIC tunnel transport support with optional edge transport selection	2026-03-19 10:44:22 +00:00
Juergen Kunz	e4807be00b	v4.9.1 Some checks failed Default (tags) / security (push) Failing after 1s Details Default (tags) / test (push) Failing after 1s Details Default (tags) / release (push) Has been skipped Details Default (tags) / metadata (push) Has been skipped Details	2026-03-18 00:30:03 +00:00
Juergen Kunz	b649322e65	fix(readme): document QoS tiers, heartbeat frames, and adaptive flow control in the protocol overview	2026-03-18 00:30:03 +00:00
Juergen Kunz	d89d1cfbbf	v4.9.0 Some checks failed Default (tags) / security (push) Failing after 1s Details Default (tags) / test (push) Failing after 1s Details Default (tags) / release (push) Has been skipped Details Default (tags) / metadata (push) Has been skipped Details	2026-03-18 00:13:14 +00:00
Juergen Kunz	6cbe8bee5e	feat(protocol): add sustained-stream tunnel scheduling to isolate high-throughput traffic	2026-03-18 00:13:14 +00:00
Juergen Kunz	a63247af3e	v4.8.19 Some checks failed Default (tags) / security (push) Failing after 1s Details Default (tags) / test (push) Failing after 0s Details Default (tags) / release (push) Has been skipped Details Default (tags) / metadata (push) Has been skipped Details	2026-03-18 00:02:20 +00:00
Juergen Kunz	28a0c769d9	fix(remoteingress-protocol): reduce per-stream flow control windows and increase control channel buffering	2026-03-18 00:02:20 +00:00
Juergen Kunz	ce7ccd83dc	v4.8.18 Some checks failed Default (tags) / security (push) Failing after 0s Details Default (tags) / test (push) Failing after 0s Details Default (tags) / release (push) Has been skipped Details Default (tags) / metadata (push) Has been skipped Details	2026-03-17 23:29:02 +00:00
Juergen Kunz	93578d7034	fix(rust-protocol): switch tunnel frame buffers from Vec<u8> to Bytes to reduce copying and memory overhead	2026-03-17 23:29:02 +00:00
Juergen Kunz	4cfc518301	v4.8.17 Some checks failed Default (tags) / security (push) Failing after 1s Details Default (tags) / test (push) Failing after 0s Details Default (tags) / release (push) Has been skipped Details Default (tags) / metadata (push) Has been skipped Details	2026-03-17 22:46:55 +00:00
Juergen Kunz	124df129ec	fix(protocol): increase per-stream flow control windows and remove adaptive read caps	2026-03-17 22:46:55 +00:00
Juergen Kunz	0b8420aac9	v4.8.16 Some checks failed Default (tags) / security (push) Failing after 1s Details Default (tags) / test (push) Failing after 0s Details Default (tags) / release (push) Has been skipped Details Default (tags) / metadata (push) Has been skipped Details	2026-03-17 19:13:30 +00:00
Juergen Kunz	afd193336a	fix(release): bump package version to 4.8.15	2026-03-17 19:13:30 +00:00
Juergen Kunz	e8d429f117	v4.8.13 Some checks failed Default (tags) / security (push) Failing after 0s Details Default (tags) / test (push) Failing after 0s Details Default (tags) / release (push) Has been skipped Details Default (tags) / metadata (push) Has been skipped Details	2026-03-17 15:50:47 +00:00
Juergen Kunz	3c2299430a	fix(remoteingress-protocol): require a flush after each written frame to bound TLS buffer growth	2026-03-17 15:50:47 +00:00
Juergen Kunz	8b5df9a0b7	update	2026-03-17 15:36:23 +00:00
Juergen Kunz	236d6d16ee	v4.8.12 Some checks failed Default (tags) / security (push) Failing after 1s Details Default (tags) / test (push) Failing after 1s Details Default (tags) / release (push) Has been skipped Details Default (tags) / metadata (push) Has been skipped Details	2026-03-17 13:27:26 +00:00
Juergen Kunz	81bbb33016	fix(tunnel): prevent tunnel backpressure buffering from exhausting memory and cancel stream handlers before TLS shutdown	2026-03-17 13:27:26 +00:00
Juergen Kunz	79af6fd425	v4.8.11 Some checks failed Default (tags) / security (push) Failing after 1s Details Default (tags) / test (push) Failing after 1s Details Default (tags) / release (push) Has been skipped Details Default (tags) / metadata (push) Has been skipped Details	2026-03-17 12:57:04 +00:00
Juergen Kunz	f71b2f1876	fix(remoteingress-core): stop data frame send loops promptly when stream cancellation is triggered	2026-03-17 12:57:04 +00:00
Juergen Kunz	0161a2589c	v4.8.10 Some checks failed Default (tags) / security (push) Failing after 1s Details Default (tags) / test (push) Failing after 1s Details Default (tags) / release (push) Has been skipped Details Default (tags) / metadata (push) Has been skipped Details	2026-03-17 12:47:03 +00:00
Juergen Kunz	bfd9e58b4f	fix(remoteingress-core): guard tunnel frame sends with cancellation to prevent async send deadlocks	2026-03-17 12:47:03 +00:00
Juergen Kunz	9a8760c18d	v4.8.9 Some checks failed Default (tags) / security (push) Failing after 1s Details Default (tags) / test (push) Failing after 1s Details Default (tags) / release (push) Has been skipped Details Default (tags) / metadata (push) Has been skipped Details	2026-03-17 12:35:15 +00:00
Juergen Kunz	c77caa89fc	fix(repo): no changes to commit	2026-03-17 12:35:15 +00:00
Juergen Kunz	04586aab39	v4.8.8 Some checks failed Default (tags) / security (push) Failing after 1s Details Default (tags) / test (push) Failing after 1s Details Default (tags) / release (push) Has been skipped Details Default (tags) / metadata (push) Has been skipped Details	2026-03-17 12:33:28 +00:00
Juergen Kunz	f9a739858d	fix(remoteingress-core): cancel stale edge connections when an edge reconnects	2026-03-17 12:33:28 +00:00
Juergen Kunz	da01fbeecd	v4.8.7	2026-03-17 12:04:20 +00:00
Juergen Kunz	264e8eeb97	fix(remoteingress-core): perform graceful TLS shutdown on edge and hub tunnel streams	2026-03-17 12:04:20 +00:00
Juergen Kunz	9922c3b020	v4.8.6	2026-03-17 11:50:22 +00:00
Juergen Kunz	38cde37cff	fix(remoteingress-core): initialize disconnect reason only when set in hub loop break paths	2026-03-17 11:50:22 +00:00
Juergen Kunz	64572827e5	v4.8.5	2026-03-17 11:48:44 +00:00
Juergen Kunz	c4e26198b9	fix(repo): no changes to commit	2026-03-17 11:48:44 +00:00
Juergen Kunz	0b5d72de28	v4.8.4	2026-03-17 11:47:33 +00:00
Juergen Kunz	e8431c0174	fix(remoteingress-core): prevent stream stalls by guaranteeing flow-control updates and avoiding bounded per-stream channel overflows	2026-03-17 11:47:33 +00:00
Juergen Kunz	d57d6395dd	v4.8.3	2026-03-17 11:15:18 +00:00
Juergen Kunz	2e5ceeaf5c	fix(protocol,edge): optimize tunnel frame handling and zero-copy uploads in edge I/O	2026-03-17 11:15:18 +00:00
Juergen Kunz	1979910f6f	v4.8.2	2026-03-17 10:33:21 +00:00
Juergen Kunz	edfad2dffe	fix(rust-edge): refactor tunnel I/O to preserve TLS state and prioritize control frames	2026-03-17 10:33:21 +00:00
Juergen Kunz	d907943ae5	v4.8.1	2026-03-17 01:48:06 +00:00
Juergen Kunz	4bfb1244fc	fix(remoteingress-core): remove tunnel writer timeouts from edge and hub buffered writes	2026-03-17 01:48:06 +00:00
Juergen Kunz	e31c3421a6	v4.8.0	2026-03-17 00:58:08 +00:00
Juergen Kunz	de8422966a	feat(events): include disconnect reasons in edge and hub management events	2026-03-17 00:58:08 +00:00
Juergen Kunz	a87e9578eb	v4.7.2	2026-03-17 00:39:57 +00:00
Juergen Kunz	b851bc7994	fix(remoteingress-core): add tunnel write timeouts and scale initial stream windows by active stream count	2026-03-17 00:39:57 +00:00
Juergen Kunz	1284bb5b73	v4.7.1	2026-03-17 00:15:10 +00:00
Juergen Kunz	1afd0e5347	fix(remoteingress-core): improve tunnel failure detection and reconnect handling	2026-03-17 00:15:10 +00:00
Juergen Kunz	96e7ab00cf	v4.7.0	2026-03-16 23:35:02 +00:00
Juergen Kunz	17d1a795cd	feat(edge,protocol,test): add configurable edge bind address and expand flow-control test coverage	2026-03-16 23:35:02 +00:00
Juergen Kunz	982f648928	v4.6.1	2026-03-16 22:46:51 +00:00
Juergen Kunz	3a2a060a85	fix(remoteingress-core): avoid spurious tunnel disconnect events and increase control channel capacity	2026-03-16 22:46:51 +00:00
Juergen Kunz	e0c469147e	v4.6.0	2026-03-16 19:37:06 +00:00
Juergen Kunz	0fdcdf566e	feat(remoteingress-core): add adaptive per-stream flow control based on active stream counts	2026-03-16 19:37:06 +00:00
Juergen Kunz	a808d4c9de	v4.5.12	2026-03-16 17:39:25 +00:00
Juergen Kunz	f8a0171ef3	fix(remoteingress-core): improve tunnel liveness handling and enable TCP keepalive for accepted client sockets	2026-03-16 17:39:25 +00:00
Juergen Kunz	1d59a48648	v4.5.11	2026-03-16 13:55:02 +00:00
Juergen Kunz	af2ec11a2d	fix(repo): no changes to commit	2026-03-16 13:55:02 +00:00
Juergen Kunz	b6e66a7fa6	v4.5.10	2026-03-16 13:48:35 +00:00
Juergen Kunz	1391b39601	fix(remoteingress-core): guard zero-window reads to avoid false EOF handling on stalled streams	2026-03-16 13:48:35 +00:00
Juergen Kunz	e813c2f044	v4.5.9	2026-03-16 11:29:38 +00:00
Juergen Kunz	0b8c1f0b57	fix(remoteingress-core): delay stream close until downstream response draining finishes to prevent truncated transfers	2026-03-16 11:29:38 +00:00
Juergen Kunz	a63dbf2502	v4.5.8	2026-03-16 10:51:59 +00:00
Juergen Kunz	4b95a3c999	fix(remoteingress-core): ensure upstream writes cancel promptly and reliably deliver CLOSE_BACK frames	2026-03-16 10:51:59 +00:00
Juergen Kunz	51ab32f6c3	v4.5.7	2026-03-16 09:44:31 +00:00
Juergen Kunz	ed52520d50	fix(remoteingress-core): improve tunnel reconnect and frame write efficiency	2026-03-16 09:44:31 +00:00
Juergen Kunz	a08011d2da	v4.5.6	2026-03-16 09:36:03 +00:00
Juergen Kunz	679b247c8a	fix(remoteingress-core): disable Nagle's algorithm on edge, hub, and upstream TCP sockets to reduce control-frame latency	2026-03-16 09:36:03 +00:00