A powerful proxy package that effectively handles high traffic, with features such as SSL/TLS support, port proxying, WebSocket handling, and dynamic routing with authentication options.

Architecture & Flow Diagrams

Component Architecture

The diagram below illustrates the main components of SmartProxy and how they interact:

flowchart TB
    Client([Client])
    
    subgraph "SmartProxy Components"
        direction TB
        HTTP80[HTTP Port 80\nSslRedirect]
        HTTPS443[HTTPS Port 443\nNetworkProxy]
        PortProxy[TCP Port Proxy\nwith SNI routing]
        IPTables[IPTablesProxy]
        Router[ProxyRouter]
        ACME[Port80Handler\nACME/Let's Encrypt]
        Certs[(SSL Certificates)]
    end
    
    subgraph "Backend Services"
        Service1[Service 1]
        Service2[Service 2]
        Service3[Service 3]
    end
    
    Client -->|HTTP Request| HTTP80
    HTTP80 -->|Redirect| Client
    Client -->|HTTPS Request| HTTPS443
    Client -->|TLS/TCP| PortProxy
    
    HTTPS443 -->|Route Request| Router
    Router -->|Proxy Request| Service1
    Router -->|Proxy Request| Service2
    
    PortProxy -->|Direct TCP| Service2
    PortProxy -->|Direct TCP| Service3
    
    IPTables -.->|Low-level forwarding| PortProxy
    
    HTTP80 -.->|Challenge Response| ACME
    ACME -.->|Generate/Manage| Certs
    Certs -.->|Provide TLS Certs| HTTPS443
    
    classDef component fill:#f9f,stroke:#333,stroke-width:2px;
    classDef backend fill:#bbf,stroke:#333,stroke-width:1px;
    classDef client fill:#dfd,stroke:#333,stroke-width:2px;
    
    class Client client;
    class HTTP80,HTTPS443,PortProxy,IPTables,Router,ACME component;
    class Service1,Service2,Service3 backend;

HTTPS Reverse Proxy Flow

This diagram shows how HTTPS requests are handled and proxied to backend services:

sequenceDiagram
    participant Client
    participant NetworkProxy
    participant ProxyRouter
    participant Backend
    
    Client->>NetworkProxy: HTTPS Request
    
    Note over NetworkProxy: TLS Termination
    
    NetworkProxy->>ProxyRouter: Route Request
    ProxyRouter->>ProxyRouter: Match hostname to config
    
    alt Authentication Required
        NetworkProxy->>Client: Request Authentication
        Client->>NetworkProxy: Send Credentials
        NetworkProxy->>NetworkProxy: Validate Credentials
    end
    
    NetworkProxy->>Backend: Forward Request
    Backend->>NetworkProxy: Response
    
    Note over NetworkProxy: Add Default Headers
    
    NetworkProxy->>Client: Forward Response
    
    alt WebSocket Request
        Client->>NetworkProxy: Upgrade to WebSocket
        NetworkProxy->>Backend: Upgrade to WebSocket
        loop WebSocket Active
            Client->>NetworkProxy: WebSocket Message
            NetworkProxy->>Backend: Forward Message
            Backend->>NetworkProxy: WebSocket Message
            NetworkProxy->>Client: Forward Message
            NetworkProxy-->>NetworkProxy: Heartbeat Check
        end
    end

Port Proxy with SNI-based Routing

This diagram illustrates how TCP connections with SNI (Server Name Indication) are processed and forwarded:

sequenceDiagram
    participant Client
    participant PortProxy
    participant Backend
    
    Client->>PortProxy: TLS Connection
    
    alt SNI Enabled
        PortProxy->>Client: Accept Connection
        Client->>PortProxy: TLS ClientHello with SNI
        PortProxy->>PortProxy: Extract SNI Hostname
        PortProxy->>PortProxy: Match Domain Config
        PortProxy->>PortProxy: Validate Client IP
        
        alt IP Allowed
            PortProxy->>Backend: Forward Connection
            Note over PortProxy,Backend: Bidirectional Data Flow
        else IP Rejected
            PortProxy->>Client: Close Connection
        end
    else Port-based Routing
        PortProxy->>PortProxy: Match Port Range
        PortProxy->>PortProxy: Find Domain Config
        PortProxy->>PortProxy: Validate Client IP
        
        alt IP Allowed
            PortProxy->>Backend: Forward Connection
            Note over PortProxy,Backend: Bidirectional Data Flow
        else IP Rejected
            PortProxy->>Client: Close Connection
        end
    end
    
    loop Connection Active
        PortProxy-->>PortProxy: Monitor Activity
        PortProxy-->>PortProxy: Check Max Lifetime
        alt Inactivity or Max Lifetime Exceeded
            PortProxy->>Client: Close Connection
            PortProxy->>Backend: Close Connection
        end
    end

Let's Encrypt Certificate Acquisition

This diagram shows how certificates are automatically acquired through the ACME protocol:

sequenceDiagram
    participant Client
    participant Port80Handler
    participant ACME as Let's Encrypt ACME
    participant NetworkProxy
    
    Client->>Port80Handler: HTTP Request for domain
    
    alt Certificate Exists
        Port80Handler->>Client: Redirect to HTTPS
    else No Certificate
        Port80Handler->>Port80Handler: Mark domain as obtaining cert
        Port80Handler->>ACME: Create account & new order
        ACME->>Port80Handler: Challenge information
        
        Port80Handler->>Port80Handler: Store challenge token & key authorization
        
        ACME->>Port80Handler: HTTP-01 Challenge Request
        Port80Handler->>ACME: Challenge Response
        
        ACME->>ACME: Validate domain ownership
        ACME->>Port80Handler: Challenge validated
        
        Port80Handler->>Port80Handler: Generate CSR
        Port80Handler->>ACME: Submit CSR
        ACME->>Port80Handler: Issue Certificate
        
        Port80Handler->>Port80Handler: Store certificate & private key
        Port80Handler->>Port80Handler: Mark certificate as obtained
        
        Note over Port80Handler,NetworkProxy: Certificate available for use
        
        Client->>Port80Handler: Another HTTP Request
        Port80Handler->>Client: Redirect to HTTPS
        Client->>NetworkProxy: HTTPS Request
        Note over NetworkProxy: Uses new certificate
    end

Features

HTTPS Reverse Proxy - Route traffic to backend services based on hostname with TLS termination
WebSocket Support - Full WebSocket proxying with heartbeat monitoring
TCP Port Forwarding - Advanced port forwarding with SNI inspection and domain-based routing
Enhanced TLS Handling - Robust TLS handshake processing with improved certificate error handling
HTTP to HTTPS Redirection - Automatically redirect HTTP requests to HTTPS
Let's Encrypt Integration - Automatic certificate management using ACME protocol
IP Filtering - Control access with IP allow/block lists using glob patterns
IPTables Integration - Direct manipulation of iptables for low-level port forwarding
Basic Authentication - Support for basic auth on proxied routes
Connection Management - Intelligent connection tracking and cleanup with configurable timeouts
Browser Compatibility - Optimized for modern browsers with fixes for common TLS handshake issues

Installation

npm install @push.rocks/smartproxy

Usage

Basic Reverse Proxy Setup

import { NetworkProxy } from '@push.rocks/smartproxy';

// Create a reverse proxy listening on port 443
const proxy = new NetworkProxy({
  port: 443
});

// Define reverse proxy configurations
const proxyConfigs = [
  {
    hostName: 'example.com',
    destinationIp: '127.0.0.1',
    destinationPort: 3000,
    publicKey: 'your-cert-content',
    privateKey: 'your-key-content'
  },
  {
    hostName: 'api.example.com',
    destinationIp: '127.0.0.1',
    destinationPort: 4000,
    publicKey: 'your-cert-content',
    privateKey: 'your-key-content',
    // Optional basic auth
    authentication: {
      type: 'Basic',
      user: 'admin',
      pass: 'secret'
    }
  }
];

// Start the proxy and update configurations
(async () => {
  await proxy.start();
  await proxy.updateProxyConfigs(proxyConfigs);
  
  // Add default headers to all responses
  await proxy.addDefaultHeaders({
    'Strict-Transport-Security': 'max-age=31536000; includeSubDomains; preload'
  });
})();

HTTP to HTTPS Redirection

import { SslRedirect } from '@push.rocks/smartproxy';

// Create and start HTTP to HTTPS redirect service on port 80
const redirector = new SslRedirect(80);
redirector.start();

TCP Port Forwarding with Domain-based Routing

import { PortProxy } from '@push.rocks/smartproxy';

// Configure port proxy with domain-based routing
const portProxy = new PortProxy({
  fromPort: 443,
  toPort: 8443,
  targetIP: 'localhost', // Default target host
  sniEnabled: true,      // Enable SNI inspection
  
  // Enhanced reliability settings
  initialDataTimeout: 60000,        // 60 seconds for initial TLS handshake
  socketTimeout: 3600000,           // 1 hour socket timeout
  maxConnectionLifetime: 3600000,   // 1 hour connection lifetime
  inactivityTimeout: 3600000,       // 1 hour inactivity timeout
  maxPendingDataSize: 10 * 1024 * 1024, // 10MB buffer for large TLS handshakes
  
  // Browser compatibility enhancement
  enableTlsDebugLogging: false,     // Enable for troubleshooting TLS issues
  
  // Port and IP configuration
  globalPortRanges: [{ from: 443, to: 443 }],
  defaultAllowedIPs: ['*'], // Allow all IPs by default
  
  // Socket optimizations for better connection stability
  noDelay: true,                    // Disable Nagle's algorithm
  keepAlive: true,                  // Enable TCP keepalive
  enableKeepAliveProbes: true,      // Enhanced keepalive for stability
  
  // Domain-specific routing configuration
  domainConfigs: [
    {
      domains: ['example.com', '*.example.com'], // Glob patterns for matching domains
      allowedIPs: ['192.168.1.*'],               // Restrict access by IP
      blockedIPs: ['192.168.1.100'],             // Block specific IPs
      targetIPs: ['10.0.0.1', '10.0.0.2'],       // Round-robin between multiple targets
      portRanges: [{ from: 443, to: 443 }],
      connectionTimeout: 7200000                 // Domain-specific timeout (2 hours)
    }
  ],
  
  preserveSourceIP: true
});

portProxy.start();

IPTables Port Forwarding

import { IPTablesProxy } from '@push.rocks/smartproxy';

// Basic usage - forward single port
const basicProxy = new IPTablesProxy({
  fromPort: 80,
  toPort: 8080,
  toHost: 'localhost',
  preserveSourceIP: true,
  deleteOnExit: true  // Automatically clean up rules on process exit
});

// Forward port ranges
const rangeProxy = new IPTablesProxy({
  fromPort: { from: 3000, to: 3010 },  // Forward ports 3000-3010
  toPort: { from: 8000, to: 8010 },    // To ports 8000-8010
  protocol: 'tcp',                     // TCP protocol (default)
  ipv6Support: true,                   // Enable IPv6 support
  enableLogging: true                  // Enable detailed logging
});

// Multiple port specifications with IP filtering
const advancedProxy = new IPTablesProxy({
  fromPort: [80, 443, { from: 8000, to: 8010 }],  // Multiple ports/ranges
  toPort: [8080, 8443, { from: 18000, to: 18010 }],
  allowedSourceIPs: ['10.0.0.0/8', '192.168.1.0/24'],  // Only allow these IPs
  bannedSourceIPs: ['192.168.1.100'],                 // Explicitly block these IPs
  addJumpRule: true,                                  // Use custom chain for better management
  checkExistingRules: true                           // Check for duplicate rules
});

// NetworkProxy integration for SSL termination
const sslProxy = new IPTablesProxy({
  fromPort: 443,
  toPort: 8443,
  netProxyIntegration: {
    enabled: true,
    redirectLocalhost: true,           // Redirect localhost traffic to NetworkProxy
    sslTerminationPort: 8443           // Port where NetworkProxy handles SSL
  }
});

// Start any of the proxies
await basicProxy.start();

Automatic HTTPS Certificate Management

import { Port80Handler } from '@push.rocks/smartproxy';

// Create an ACME handler for Let's Encrypt
const acmeHandler = new Port80Handler();

// Add domains to manage certificates for
acmeHandler.addDomain('example.com');
acmeHandler.addDomain('api.example.com');

Configuration Options

NetworkProxy Options

Option	Description	Default
`port`	Port to listen on for HTTPS connections	-

PortProxy Settings

Option	Description	Default
`fromPort`	Port to listen on	-
`toPort`	Destination port to forward to	-
`targetIP`	Default destination IP if not specified in domainConfig	'localhost'
`sniEnabled`	Enable SNI inspection for TLS connections	false
`defaultAllowedIPs`	IP patterns allowed by default	-
`defaultBlockedIPs`	IP patterns blocked by default	-
`preserveSourceIP`	Preserve the original client IP	false
`maxConnectionLifetime`	Maximum time in ms to keep a connection open	3600000
`initialDataTimeout`	Timeout for initial data/handshake in ms	60000
`socketTimeout`	Socket inactivity timeout in ms	3600000
`inactivityTimeout`	Connection inactivity check timeout in ms	3600000
`inactivityCheckInterval`	How often to check for inactive connections in ms	60000
`maxPendingDataSize`	Maximum bytes to buffer during connection setup	10485760
`globalPortRanges`	Array of port ranges to listen on	-
`forwardAllGlobalRanges`	Forward all global range connections to targetIP	false
`gracefulShutdownTimeout`	Time in ms to wait during shutdown	30000
`noDelay`	Disable Nagle's algorithm	true
`keepAlive`	Enable TCP keepalive	true
`keepAliveInitialDelay`	Initial delay before sending keepalive probes in ms	30000
`enableKeepAliveProbes`	Enable enhanced TCP keep-alive probes	false
`enableTlsDebugLogging`	Enable detailed TLS handshake debugging	false
`enableDetailedLogging`	Enable detailed connection logging	false
`enableRandomizedTimeouts`	Randomize timeouts slightly to prevent thundering herd	true

IPTablesProxy Settings

Option	Description	Default
`fromPort`	Source port(s) or range(s) to forward from	-
`toPort`	Destination port(s) or range(s) to forward to	-
`toHost`	Destination host to forward to	'localhost'
`preserveSourceIP`	Preserve the original client IP	false
`deleteOnExit`	Remove iptables rules when process exits	false
`protocol`	Protocol to forward ('tcp', 'udp', or 'all')	'tcp'
`enableLogging`	Enable detailed logging	false
`ipv6Support`	Enable IPv6 support with ip6tables	false
`allowedSourceIPs`	Array of IP addresses/CIDR allowed to connect	-
`bannedSourceIPs`	Array of IP addresses/CIDR blocked from connecting	-
`forceCleanSlate`	Clear all IPTablesProxy rules before starting	false
`addJumpRule`	Add a custom chain for cleaner rule management	false
`checkExistingRules`	Check if rules already exist before adding	true
`netProxyIntegration`	NetworkProxy integration options (object)	-

IPTablesProxy NetworkProxy Integration Options

Option	Description	Default
`enabled`	Enable NetworkProxy integration	false
`redirectLocalhost`	Redirect localhost traffic to NetworkProxy	false
`sslTerminationPort`	Port where NetworkProxy handles SSL termination	-

Advanced Features

TLS Handshake Optimization

The enhanced PortProxy implementation includes significant improvements for TLS handshake handling:

Robust SNI extraction with improved error handling
Increased buffer size for complex TLS handshakes (10MB)
Longer initial handshake timeout (60 seconds)
Detection and tracking of TLS connection states
Optional detailed TLS debug logging for troubleshooting
Browser compatibility fixes for Chrome certificate errors

// Example configuration to solve Chrome certificate errors
const portProxy = new PortProxy({
  // ... other settings
  initialDataTimeout: 60000,            // Give browser more time for handshake
  maxPendingDataSize: 10 * 1024 * 1024, // Larger buffer for complex handshakes
  enableTlsDebugLogging: true,          // Enable when troubleshooting
});

Connection Management and Monitoring

The PortProxy class includes built-in connection tracking and monitoring:

Automatic cleanup of idle connections with configurable timeouts
Timeouts for connections that exceed maximum lifetime
Detailed logging of connection states
Termination statistics
Randomized timeouts to prevent "thundering herd" problems
Per-domain timeout configuration

WebSocket Support

The NetworkProxy class provides WebSocket support with:

WebSocket connection proxying
Automatic heartbeat monitoring
Connection cleanup for inactive WebSockets

SNI-based Routing

The PortProxy class can inspect the SNI (Server Name Indication) field in TLS handshakes to route connections based on the requested domain:

Multiple backend targets per domain
Round-robin load balancing
Domain-specific allowed IP ranges
Protection against SNI renegotiation attacks

Enhanced IPTables Management

The improved IPTablesProxy class offers advanced capabilities:

Support for multiple port ranges and individual ports
IPv6 support with ip6tables
Source IP filtering with allow/block lists
Custom chain creation for better rule organization
NetworkProxy integration for SSL termination
Automatic rule existence checking to prevent duplicates
Comprehensive cleanup on shutdown

Troubleshooting

Browser Certificate Errors

If you experience certificate errors in browsers, especially in Chrome, try these solutions:

Increase Initial Data Timeout: Set initialDataTimeout to 60 seconds or higher
Increase Buffer Size: Set maxPendingDataSize to 10MB or higher
Enable TLS Debug Logging: Set enableTlsDebugLogging: true to troubleshoot handshake issues
Enable Keep-Alive Probes: Set enableKeepAliveProbes: true for better connection stability
Check Certificate Chain: Ensure your certificate chain is complete and in the correct order

// Configuration to fix Chrome certificate errors
const portProxy = new PortProxy({
  // ... other settings
  initialDataTimeout: 60000,
  maxPendingDataSize: 10 * 1024 * 1024,
  enableTlsDebugLogging: true,
  enableKeepAliveProbes: true
});

Connection Stability

For improved connection stability in high-traffic environments:

Set Appropriate Timeouts: Use longer timeouts for long-lived connections
Use Domain-Specific Timeouts: Configure per-domain timeouts for different types of services
Enable TCP Keep-Alive: Ensure keepAlive is set to true
Monitor Connection Statistics: Enable detailed logging to track termination reasons
Fine-tune Inactivity Checks: Adjust inactivityCheckInterval based on your traffic patterns

IPTables Troubleshooting

If you're experiencing issues with IPTablesProxy:

Enable Detailed Logging: Set enableLogging: true to see all rule operations
Force Clean Slate: Use forceCleanSlate: true to remove any lingering rules
Use Custom Chains: Enable addJumpRule: true for cleaner rule management
Check Permissions: Ensure your process has sufficient permissions to modify iptables
Verify IPv6 Support: If using ipv6Support: true, ensure ip6tables is available

License and Legal Information

This repository contains open-source code that is licensed under the MIT License. A copy of the MIT License can be found in the license file within this repository.

Please note: The MIT License does not grant permission to use the trade names, trademarks, service marks, or product names of the project, except as required for reasonable and customary use in describing the origin of the work and reproducing the content of the NOTICE file.

Trademarks

This project is owned and maintained by Task Venture Capital GmbH. The names and logos associated with Task Venture Capital GmbH and any related products or services are trademarks of Task Venture Capital GmbH and are not included within the scope of the MIT license granted herein. Use of these trademarks must comply with Task Venture Capital GmbH's Trademark Guidelines, and any usage must be approved in writing by Task Venture Capital GmbH.

readme.md

@push.rocks/smartproxy