v4.8.4

fix(remoteingress-core): prevent stream stalls by guaranteeing flow-control updates and avoiding bounded per-stream channel overflows
v4.8.3
2026-03-17 11:47:33 +00:00 · 2026-03-17 11:47:33 +00:00 · 2026-03-17 11:15:18 +00:00 · 2026-03-17 11:15:18 +00:00 · 2026-03-17 10:33:21 +00:00 · 2026-03-17 10:33:21 +00:00
22 changed files with 3998 additions and 434 deletions
--- a/changelog.md
+++ b/changelog.md
@@ -1,5 +1,260 @@
 # Changelog

+## 2026-03-17 - 4.8.4 - fix(remoteingress-core)
+prevent stream stalls by guaranteeing flow-control updates and avoiding bounded per-stream channel overflows
+
+- Replace bounded per-stream data channels with unbounded channels on edge and hub, relying on existing WINDOW_UPDATE flow control to limit bytes in flight
+- Use awaited sends for FRAME_WINDOW_UPDATE and FRAME_WINDOW_UPDATE_BACK so updates are not dropped and streams do not deadlock under backpressure
+- Clean up stream state when channel receivers have already exited instead of closing active streams because a bounded queue filled
+
+## 2026-03-17 - 4.8.3 - fix(protocol,edge)
+optimize tunnel frame handling and zero-copy uploads in edge I/O
+
+- extract hub frame processing into a shared edge handler to remove duplicated tunnel logic
+- add zero-copy frame header encoding and read payloads directly into framed buffers for client-to-hub uploads
+- refactor TunnelIo read/write state to avoid unsafe queue access and reduce buffer churn with incremental parsing
+
+## 2026-03-17 - 4.8.2 - fix(rust-edge)
+refactor tunnel I/O to preserve TLS state and prioritize control frames
+
+- replace split TLS handling with a single-owner TunnelIo to avoid handshake and buffered read corruption
+- prioritize control frames over data frames to prevent WINDOW_UPDATE starvation and flow-control deadlocks
+- improve tunnel reliability with incremental frame parsing, liveness/error events, and corrupt frame header logging
+
+## 2026-03-17 - 4.8.1 - fix(remoteingress-core)
+remove tunnel writer timeouts from edge and hub buffered writes
+
+- Drops the 30 second timeout wrapper around writer.write_all and writer.flush in both edge and hub tunnel writers.
+- Updates error logging to report write failures without referring to stalled writes.
+
+## 2026-03-17 - 4.8.0 - feat(events)
+include disconnect reasons in edge and hub management events
+
+- Add reason fields to tunnelDisconnected and edgeDisconnected events emitted from the Rust core and binary bridge
+- Propagate specific disconnect causes such as EOF, liveness timeout, writer failure, handshake failure, and hub cancellation
+- Update TypeScript edge and hub classes to log and forward disconnect reason data
+- Extend serialization tests to cover the new reason fields
+
+## 2026-03-17 - 4.7.2 - fix(remoteingress-core)
+add tunnel write timeouts and scale initial stream windows by active stream count
+
+- Wrap tunnel frame writes and flushes in a 30-second timeout on both edge and hub to detect stalled writers and trigger faster reconnect or cleanup.
+- Compute each stream's initial send window from the current active stream count instead of using a fixed window to keep total in-flight data within the 32MB budget.
+
+## 2026-03-17 - 4.7.1 - fix(remoteingress-core)
+improve tunnel failure detection and reconnect handling
+
+- Enable TCP keepalive on edge and hub connections to detect silent network failures sooner
+- Trigger immediate reconnect or disconnect when tunnel writer tasks fail instead of waiting for liveness timeouts
+- Prevent active stream counter underflow during concurrent connection cleanup
+
+## 2026-03-16 - 4.7.0 - feat(edge,protocol,test)
+add configurable edge bind address and expand flow-control test coverage
+
+- adds an optional bindAddress configuration for edge TCP listeners, defaulting to 0.0.0.0 when not provided
+- passes bindAddress through the TypeScript edge client and Rust edge runtime so local test setups can bind to localhost
+- adds protocol unit tests for adaptive stream window sizing and window update frame encoding/decoding
+- introduces end-to-end flow-control tests and updates the test script to build before running tests
+
+## 2026-03-16 - 4.6.1 - fix(remoteingress-core)
+avoid spurious tunnel disconnect events and increase control channel capacity
+
+- Emit TunnelDisconnected only after an established connection is actually lost, preventing false disconnect events during failed reconnect attempts.
+- Increase edge and hub control-channel buffer sizes from 64 to 256 to better prioritize control frames under load.
+
+## 2026-03-16 - 4.6.0 - feat(remoteingress-core)
+add adaptive per-stream flow control based on active stream counts
+
+- Track active stream counts on edge and hub connections to size per-stream flow control windows dynamically.
+- Cap WINDOW_UPDATE increments and read sizes to the adaptive window so bandwidth is shared more evenly across concurrent streams.
+- Apply the adaptive logic to both upload and download paths on edge and hub stream handlers.
+
+## 2026-03-16 - 4.5.12 - fix(remoteingress-core)
+improve tunnel liveness handling and enable TCP keepalive for accepted client sockets
+
+- Avoid disconnecting edges when PING or PONG frames cannot be queued because the control channel is temporarily full.
+- Enable TCP_NODELAY and TCP keepalive on accepted client connections to help detect stale or dropped clients.
+
+## 2026-03-16 - 4.5.11 - fix(repo)
+no changes to commit
+
+
+## 2026-03-16 - 4.5.10 - fix(remoteingress-core)
+guard zero-window reads to avoid false EOF handling on stalled streams
+
+- Prevent upload and download loops from calling read on an empty buffer when flow-control window remains at 0 after stall timeout
+- Log a warning and close the affected stream instead of misinterpreting Ok(0) as end-of-file
+
+## 2026-03-16 - 4.5.9 - fix(remoteingress-core)
+delay stream close until downstream response draining finishes to prevent truncated transfers
+
+- Waits for the hub-to-client download task to finish before sending the stream CLOSE frame
+- Prevents upstream reads from being cancelled mid-response during asymmetric transfers such as git fetch
+- Retains the existing timeout so stalled downloads still clean up safely
+
+## 2026-03-16 - 4.5.8 - fix(remoteingress-core)
+ensure upstream writes cancel promptly and reliably deliver CLOSE_BACK frames
+
+- listen for stream cancellation while waiting on upstream write timeouts so FRAME_CLOSE does not block for up to 60 seconds
+- replace try_send with send().await when emitting CLOSE_BACK frames to avoid silently dropping close notifications when the data channel is full
+
+## 2026-03-16 - 4.5.7 - fix(remoteingress-core)
+improve tunnel reconnect and frame write efficiency
+
+- Reuse the TLS connector across edge reconnections to preserve session resumption state and reduce reconnect latency.
+- Buffer hub and edge frame writes to coalesce small control and data frames into fewer TLS records and syscalls while still flushing each frame promptly.
+
+## 2026-03-16 - 4.5.6 - fix(remoteingress-core)
+disable Nagle's algorithm on edge, hub, and upstream TCP sockets to reduce control-frame latency
+
+- Enable TCP_NODELAY on the edge connection to the hub for faster PING/PONG and WINDOW_UPDATE delivery
+- Apply TCP_NODELAY on accepted hub streams before TLS handling
+- Enable TCP_NODELAY on SmartProxy upstream connections before sending the PROXY header
+
+## 2026-03-16 - 4.5.5 - fix(remoteingress-core)
+wait for hub-to-client draining before cleanup and reliably send close frames
+
+- switch CLOSE frame delivery on the data channel from try_send to send().await to avoid dropping it when the channel is full
+- delay stream cleanup until the hub-to-client task finishes or times out so large downstream responses continue after upload EOF
+- add a bounded 5-minute wait for download draining to prevent premature termination of asymmetric transfers such as git fetch
+
+## 2026-03-15 - 4.5.4 - fix(remoteingress-core)
+preserve stream close ordering and add flow-control stall timeouts
+
+- Send CLOSE and CLOSE_BACK frames on the data channel so they arrive after the final stream data frames.
+- Log and abort stalled upload and download paths when flow-control windows stay empty for 120 seconds.
+- Apply a 60-second timeout when writing buffered stream data to the upstream connection to prevent hung streams.
+
+## 2026-03-15 - 4.5.3 - fix(remoteingress-core)
+prioritize control frames over data in edge and hub tunnel writers
+
+- Split tunnel/frame writers into separate control and data channels in edge and hub
+- Use biased select loops so PING, PONG, WINDOW_UPDATE, OPEN, and CLOSE frames are sent before data frames
+- Route stream data through dedicated data channels while keeping OPEN, CLOSE, and flow-control updates on control channels to prevent keepalive starvation under load
+
+## 2026-03-15 - 4.5.2 - fix(remoteingress-core)
+improve stream flow control retries and increase channel buffer capacity
+
+- increase per-stream mpsc channel capacity from 128 to 256 on both edge and hub paths
+- only reset accumulated window update bytes after a successful try_send to avoid dropping flow-control credits when the update channel is busy
+
+## 2026-03-15 - 4.5.1 - fix(protocol)
+increase per-stream flow control window and channel buffers to improve high-RTT throughput
+
+- raise the initial stream window from 256 KB to 4 MB to allow more in-flight data per stream
+- increase edge and hub mpsc channel capacities from 16 to 128 to better absorb throughput under flow control
+
+## 2026-03-15 - 4.5.0 - feat(remoteingress-core)
+add per-stream flow control for edge and hub tunnel data transfer
+
+- introduce WINDOW_UPDATE frame types and protocol helpers for per-stream flow control
+- track per-stream send windows on both edge and hub to limit reads based on available capacity
+- send window updates after downstream writes to reduce channel pressure during large transfers
+
+## 2026-03-15 - 4.4.1 - fix(remoteingress-core)
+prevent stream data loss by applying backpressure and closing saturated channels
+
+- replace non-blocking frame writes with awaited sends in per-stream tasks so large transfers respect backpressure instead of dropping data
+- close and remove streams when back-channel or data channels fill up to avoid TCP stream corruption from silently dropped frames
+
+## 2026-03-03 - 4.4.0 - feat(remoteingress)
+add heartbeat PING/PONG and liveness timeouts; implement fast-reconnect/backoff reset and JS crash-recovery auto-restart
+
+- protocol: add FRAME_PING and FRAME_PONG and unit tests for ping/pong frames
+- edge (Rust): reset backoff after successful connection, respond to PING with PONG, track liveness via deadline and reconnect on timeout, use Duration/Instant helpers
+- hub (Rust): send periodic PING to edges, handle PONGs, enforce liveness timeout and disconnect inactive edges, use tokio interval and time utilities
+- ts: RemoteIngressEdge and RemoteIngressHub: add crash-recovery auto-restart with exponential backoff and max attempts, save/restore config and allowed edges, register/remove exit handlers, ensure stop() marks stopping and cleans up listeners
+- minor API/typing: introduce TAllowedEdge alias and persist allowed edges for restart recovery
+
+## 2026-02-26 - 4.3.0 - feat(hub)
+add optional TLS certificate/key support to hub start config and bridge
+
+- TypeScript: add tls.certPem and tls.keyPem to IHubConfig and include tlsCertPem/tlsKeyPem in startHub bridge command when both are provided
+- TypeScript: extend startHub params with tlsCertPem and tlsKeyPem and conditionally send them
+- Rust: change HubConfig serde attributes for tls_cert_pem and tls_key_pem from skip to default so absent PEM fields deserialize as None
+- Enables optional provisioning of TLS certificate and key to the hub when provided from the JS side
+
+## 2026-02-26 - 4.2.0 - feat(core)
+expose edge peer address in hub events and migrate writers to channel-based, non-blocking framing with stream limits and timeouts
+
+- Add peerAddr to ConnectedEdgeStatus and HubEvent::EdgeConnected and surface it to the TS frontend event (management:edgeConnected).
+- Replace Arc<Mutex<WriteHalf>> writers with dedicated mpsc channel writer tasks in both hub and edge crates to serialize writes off the main tasks.
+- Use non-blocking try_send for data frames to avoid head-of-line blocking and drop frames with warnings when channels are full.
+- Introduce MAX_STREAMS_PER_EDGE semaphore to limit concurrent streams per edge and reject excess opens with a CLOSE_BACK frame.
+- Add a 10s timeout when connecting to SmartProxy to avoid hanging connections.
+- Ensure writer tasks are aborted on shutdown/cleanup and propagate cancellation tokens appropriately.
+
+## 2026-02-26 - 4.1.0 - feat(remoteingress-bin)
+use mimalloc as the global allocator to reduce memory overhead and improve allocation performance
+
+- added mimalloc = "0.1" dependency to rust/crates/remoteingress-bin/Cargo.toml
+- registered mimalloc as the #[global_allocator] in rust/crates/remoteingress-bin/src/main.rs
+- updated Cargo.lock with libmimalloc-sys and mimalloc package entries
+
+## 2026-02-26 - 4.0.1 - fix(hub)
+cancel per-stream tokens on stream close and avoid duplicate StreamClosed events; bump @types/node devDependency to ^25.3.0
+
+- Add CancellationToken to per-stream entries so each stream can be cancelled independently.
+- Ensure StreamClosed event is only emitted when a stream was actually present (guards against duplicate events).
+- Cancel the stream-specific token on FRAME_CLOSE to stop associated tasks and free resources.
+- DevDependency bump: @types/node updated from ^25.2.3 to ^25.3.0.
+
+## 2026-02-19 - 4.0.0 - BREAKING CHANGE(remoteingress-core)
+add cancellation tokens and cooperative shutdown; switch event channels to bounded mpsc and improve cleanup
+
+- Introduce tokio-util::sync::CancellationToken for hub/edge and per-connection/stream cancellation, enabling cooperative shutdown of spawned tasks.
+- Replace unbounded mpsc channels with bounded mpsc::channel(1024) and switch from UnboundedSender/Receiver to Sender/Receiver; use try_send where non-blocking sends are appropriate.
+- Wire cancellation tokens through edge and hub codepaths: child tokens per connection, per-port, per-stream; cancel tokens in stop() and Drop impls to ensure deterministic task termination and cleanup.
+- Reset stream id counters and clear listener state on reconnect; improved error handling around accept/read loops using tokio::select! and cancellation checks.
+- Update Cargo.toml and Cargo.lock to add tokio-util (and related futures entries) as dependencies.
+- BREAKING: public API/types changed — take_event_rx return types and event_tx/event_rx fields now use bounded mpsc::Sender/mpsc::Receiver instead of the unbounded variants; callers must adapt to the new types and bounded behavior.
+
+## 2026-02-18 - 3.3.0 - feat(readme)
+document dynamic port assignment and runtime port updates; clarify TLS multiplexing, frame format, and handshake sequence
+
+- Adds documentation for dynamic port configuration: hub-assigned listen ports, hot-reloadable via FRAME_CONFIG frames
+- Introduces new FRAME type CONFIG (0x06) and describes payload as JSON; notes immediate push of port changes to connected edges
+- Clarifies that the tunnel is a single encrypted TLS multiplexed connection to the hub (preserves PROXY v1 behavior)
+- Specifies frame integer fields are big-endian and that stream IDs are 32-bit unsigned integers
+- Adds new events: portsAssigned and portsUpdated, and updates examples showing updateAllowedEdges usage and live port changes
+
+## 2026-02-18 - 3.2.1 - fix(tests)
+add comprehensive unit and async tests across Rust crates and TypeScript runtime
+
+- Added IPC serialization tests in remoteingress-bin (IPC request/response/event)
+- Added serde and async tests for Edge and Handshake configs and EdgeEvent/EdgeStatus in remoteingress-core (edge.rs)
+- Added extensive Hub tests: constant_time_eq, PROXY header port parsing, serde/camelCase checks, Hub events and async TunnelHub behavior (hub.rs)
+- Added STUN parser unit tests including XOR_MAPPED_ADDRESS, MAPPED_ADDRESS fallback, truncated attribute handling and other edge cases (stun.rs)
+- Added protocol frame encoding and FrameReader tests covering all frame types, payload limits and EOF conditions (remoteingress-protocol)
+- Added TypeScript Node tests for token encode/decode edge cases and RemoteIngressHub/RemoteIngressEdge class basics (test/*.node.ts)
+
+## 2026-02-18 - 3.2.0 - feat(remoteingress (edge/hub/protocol))
+add dynamic port configuration: handshake, FRAME_CONFIG frames, and hot-reloadable listeners
+
+- Introduce a JSON handshake from hub -> edge with initial listen ports and stun interval so edges can configure listeners at connect time.
+- Add FRAME_CONFIG (0x06) to the protocol and implement runtime config updates pushed from hub to connected edges.
+- Edge now applies initial ports and supports hot-reloading: spawn/abort listeners when ports change, and emit PortsAssigned / PortsUpdated events.
+- Hub now stores allowed edge metadata (listen_ports, stun_interval_secs), sends handshake responses on auth, and forwards config updates to connected edges.
+- TypeScript bridge/client updated to emit new port events and periodically log status; updateAllowedEdges API accepts listenPorts and stunIntervalSecs.
+- Stun interval handling moved to use handshake-provided/stored value instead of config.listen_ports being static.
+
+## 2026-02-18 - 3.1.1 - fix(readme)
+update README: add issue reporting/security section, document connection tokens and token utilities, clarify architecture/API and improve examples/formatting
+
+- Added an 'Issue Reporting and Security' section linking to community.foss.global for bug/security reports and contributor onboarding.
+- Documented connection tokens: encodeConnectionToken/decodeConnectionToken utilities, token format (base64url), and examples for hub and edge provisioning.
+- Clarified Hub/Edge usage and examples: condensed event handlers, added token-based start() example, and provided explicit config alternative.
+- Improved README formatting: added emojis, rephrased architecture descriptions, fixed wording and license path capitalization, and expanded example scenarios and interfaces.
+
+## 2026-02-17 - 3.1.0 - feat(edge)
+support connection tokens when starting an edge and add token encode/decode utilities
+
+- Add classes.token.ts with encodeConnectionToken/decodeConnectionToken using a base64url compact JSON format
+- Export token utilities from ts/index.ts
+- RemoteIngressEdge.start now accepts a { token } option and decodes it to an IEdgeConfig before starting
+- Add tests covering export availability, encode→decode roundtrip, malformed token, and missing fields
+- Non-breaking change — recommend a minor version bump
+
 ## 2026-02-17 - 3.0.4 - fix(build)
 bump dev dependencies, update build script, and refresh README docs

--- a/package.json
+++ b/package.json
@@ -1,6 +1,6 @@
 {
  "name": "@serve.zone/remoteingress",
-  "version": "3.0.4",
+  "version": "4.8.4",
  "private": false,
  "description": "Edge ingress tunnel for DcRouter - accepts incoming TCP connections at network edge and tunnels them to DcRouter SmartProxy preserving client IP via PROXY protocol v1.",
  "main": "dist_ts/index.js",
@@ -9,7 +9,7 @@
  "author": "Task Venture Capital GmbH",
  "license": "MIT",
  "scripts": {
-    "test": "(tstest test/ --web)",
+    "test": "(pnpm run build && tstest test/ --verbose --logfile --timeout 60)",
    "build": "(tsbuild tsfolders --allowimplicitany && tsrust)",
    "buildDocs": "(tsdoc)"
  },
@@ -20,7 +20,7 @@
    "@git.zone/tsrust": "^1.3.0",
    "@git.zone/tstest": "^3.1.8",
    "@push.rocks/tapbundle": "^6.0.3",
-    "@types/node": "^25.2.3"
+    "@types/node": "^25.3.0"
  },
  "dependencies": {
    "@push.rocks/qenv": "^6.1.3",
--- a/pnpm-lock.yaml
+++ b/pnpm-lock.yaml
@@ -34,8 +34,8 @@ importers:
        specifier: ^6.0.3
        version: 6.0.3(socks@2.8.7)
      '@types/node':
-        specifier: ^25.2.3
-        version: 25.2.3
+        specifier: ^25.3.0
+        version: 25.3.0

 packages:

@@ -1501,8 +1501,8 @@ packages:
  '@types/node@22.19.11':
    resolution: {integrity: sha512-BH7YwL6rA93ReqeQS1c4bsPpcfOmJasG+Fkr6Y59q83f9M1WcBRHR2vM+P9eOisYRcN3ujQoiZY8uk5W+1WL8w==}

-  '@types/node@25.2.3':
-    resolution: {integrity: sha512-m0jEgYlYz+mDJZ2+F4v8D1AyQb+QzsNqRuI7xg1VQX/KlKS0qT9r1Mo16yo5F/MtifXFgaofIFsdFMox2SxIbQ==}
+  '@types/node@25.3.0':
+    resolution: {integrity: sha512-4K3bqJpXpqfg2XKGK9bpDTc6xO/xoUP/RBWS7AtRMug6zZFaRekiLzjVtAoZMquxoAbzBvy5nxQ7veS5eYzf8A==}

  '@types/parse5@6.0.3':
    resolution: {integrity: sha512-SuT16Q1K51EAVPz1K29DJ/sXjhSQ0zjvsypYJ6tlwVsRV9jwW5Adq2ch8Dq8kDBCkYnELS7N7VNCSB5nC56t/g==}
@@ -3986,8 +3986,8 @@ packages:
  undici-types@6.21.0:
    resolution: {integrity: sha512-iwDZqg0QAGrg9Rav5H4n0M64c3mkR59cJ6wQp+7C4nI0gsmExaedaYLNO44eT4AtBBwjbTiGPMlt2Md0T9H9JQ==}

-  undici-types@7.16.0:
-    resolution: {integrity: sha512-Zz+aZWSj8LE6zoxD+xrjh4VfkIG8Ya6LvYkZqtUQGJPZjYl53ypCaUwWqo7eI0x66KBGeRo+mlBEkMSeSZ38Nw==}
+  undici-types@7.18.2:
+    resolution: {integrity: sha512-AsuCzffGHJybSaRrmr5eHr81mwJU3kjw6M+uprWvCXiNeN9SOGwQ3Jn8jb8m3Z6izVgknn1R0FTCEAP2QrLY/w==}

  unified@11.0.5:
    resolution: {integrity: sha512-xKvGhPWw3k84Qjh8bI3ZeJjqnyadK+GEFtazSfZv/rKeTkTjOJho6mFqh2SM96iIcZokxiOpg78GazTSg8+KHA==}
@@ -5178,7 +5178,7 @@ snapshots:
      '@jest/schemas': 29.6.3
      '@types/istanbul-lib-coverage': 2.0.6
      '@types/istanbul-reports': 3.0.4
-      '@types/node': 25.2.3
+      '@types/node': 25.3.0
      '@types/yargs': 17.0.35
      chalk: 4.1.2

@@ -6736,14 +6736,14 @@ snapshots:

  '@types/accepts@1.3.7':
    dependencies:
-      '@types/node': 25.2.3
+      '@types/node': 25.3.0

  '@types/babel__code-frame@7.27.0': {}

  '@types/body-parser@1.19.6':
    dependencies:
      '@types/connect': 3.4.38
-      '@types/node': 25.2.3
+      '@types/node': 25.3.0

  '@types/buffer-json@2.0.3': {}

@@ -6760,17 +6760,17 @@ snapshots:

  '@types/clean-css@4.2.11':
    dependencies:
-      '@types/node': 25.2.3
+      '@types/node': 25.3.0
      source-map: 0.6.1

  '@types/co-body@6.1.3':
    dependencies:
-      '@types/node': 25.2.3
+      '@types/node': 25.3.0
      '@types/qs': 6.14.0

  '@types/connect@3.4.38':
    dependencies:
-      '@types/node': 25.2.3
+      '@types/node': 25.3.0

  '@types/content-disposition@0.5.9': {}

@@ -6781,11 +6781,11 @@ snapshots:
      '@types/connect': 3.4.38
      '@types/express': 5.0.6
      '@types/keygrip': 1.0.6
-      '@types/node': 25.2.3
+      '@types/node': 25.3.0

  '@types/cors@2.8.19':
    dependencies:
-      '@types/node': 25.2.3
+      '@types/node': 25.3.0

  '@types/debounce@1.2.4': {}

@@ -6797,7 +6797,7 @@ snapshots:

  '@types/express-serve-static-core@5.1.1':
    dependencies:
-      '@types/node': 25.2.3
+      '@types/node': 25.3.0
      '@types/qs': 6.14.0
      '@types/range-parser': 1.2.7
      '@types/send': 1.2.1
@@ -6811,7 +6811,7 @@ snapshots:
  '@types/fs-extra@11.0.4':
    dependencies:
      '@types/jsonfile': 6.1.4
-      '@types/node': 25.2.3
+      '@types/node': 25.3.0

  '@types/hast@3.0.4':
    dependencies:
@@ -6845,7 +6845,7 @@ snapshots:

  '@types/jsonfile@6.1.4':
    dependencies:
-      '@types/node': 25.2.3
+      '@types/node': 25.3.0

  '@types/keygrip@1.0.6': {}

@@ -6862,7 +6862,7 @@ snapshots:
      '@types/http-errors': 2.0.5
      '@types/keygrip': 1.0.6
      '@types/koa-compose': 3.2.9
-      '@types/node': 25.2.3
+      '@types/node': 25.3.0

  '@types/mdast@4.0.4':
    dependencies:
@@ -6876,19 +6876,19 @@ snapshots:

  '@types/mute-stream@0.0.4':
    dependencies:
-      '@types/node': 25.2.3
+      '@types/node': 25.3.0

  '@types/node-forge@1.3.14':
    dependencies:
-      '@types/node': 25.2.3
+      '@types/node': 25.3.0

  '@types/node@22.19.11':
    dependencies:
      undici-types: 6.21.0

-  '@types/node@25.2.3':
+  '@types/node@25.3.0':
    dependencies:
-      undici-types: 7.16.0
+      undici-types: 7.18.2

  '@types/parse5@6.0.3': {}

@@ -6904,18 +6904,18 @@ snapshots:

  '@types/s3rver@3.7.4':
    dependencies:
-      '@types/node': 25.2.3
+      '@types/node': 25.3.0

  '@types/semver@7.7.1': {}

  '@types/send@1.2.1':
    dependencies:
-      '@types/node': 25.2.3
+      '@types/node': 25.3.0

  '@types/serve-static@2.2.0':
    dependencies:
      '@types/http-errors': 2.0.5
-      '@types/node': 25.2.3
+      '@types/node': 25.3.0

  '@types/sinon-chai@3.2.12':
    dependencies:
@@ -6934,11 +6934,11 @@ snapshots:

  '@types/tar-stream@3.1.4':
    dependencies:
-      '@types/node': 25.2.3
+      '@types/node': 25.3.0

  '@types/through2@2.0.41':
    dependencies:
-      '@types/node': 25.2.3
+      '@types/node': 25.3.0

  '@types/triple-beam@1.3.5': {}

@@ -6966,11 +6966,11 @@ snapshots:

  '@types/ws@7.4.7':
    dependencies:
-      '@types/node': 25.2.3
+      '@types/node': 25.3.0

  '@types/ws@8.18.1':
    dependencies:
-      '@types/node': 25.2.3
+      '@types/node': 25.3.0

  '@types/yargs-parser@21.0.3': {}

@@ -6980,7 +6980,7 @@ snapshots:

  '@types/yauzl@2.10.3':
    dependencies:
-      '@types/node': 25.2.3
+      '@types/node': 25.3.0
    optional: true

  '@ungap/structured-clone@1.3.0': {}
@@ -7585,7 +7585,7 @@ snapshots:
  engine.io@6.6.4:
    dependencies:
      '@types/cors': 2.8.19
-      '@types/node': 25.2.3
+      '@types/node': 25.3.0
      accepts: 1.3.8
      base64id: 2.0.0
      cookie: 0.7.2
@@ -8299,7 +8299,7 @@ snapshots:
  jest-util@29.7.0:
    dependencies:
      '@jest/types': 29.6.3
-      '@types/node': 25.2.3
+      '@types/node': 25.3.0
      chalk: 4.1.2
      ci-info: 3.9.0
      graceful-fs: 4.2.11
@@ -9807,7 +9807,7 @@ snapshots:

  undici-types@6.21.0: {}

-  undici-types@7.16.0: {}
+  undici-types@7.18.2: {}

  unified@11.0.5:
    dependencies:
--- a/readme.md
+++ b/readme.md
@@ -1,6 +1,10 @@
 # @serve.zone/remoteingress

-Edge ingress tunnel for DcRouter — accepts incoming TCP connections at the network edge and tunnels them to a DcRouter SmartProxy instance, preserving the original client IP via PROXY protocol v1.
+Edge ingress tunnel for DcRouter — accepts incoming TCP connections at the network edge and tunnels them over a single encrypted TLS connection to a DcRouter SmartProxy instance, preserving the original client IP via PROXY protocol v1.
+
+## Issue Reporting and Security
+
+For reporting bugs, issues, or security vulnerabilities, please visit [community.foss.global/](https://community.foss.global/). This is the central community hub for all issue reporting. Developers who sign and comply with our contribution agreement and go through identification can also get a [code.foss.global/](https://code.foss.global/) account to submit Pull Requests directly.

 ## Install

@@ -8,7 +12,7 @@ Edge ingress tunnel for DcRouter — accepts incoming TCP connections at the net
 pnpm install @serve.zone/remoteingress
 ```

-## Architecture
+## 🏗️ Architecture

 `@serve.zone/remoteingress` uses a **Hub/Edge** topology with a high-performance Rust core and a TypeScript API surface:

@@ -17,9 +21,9 @@ pnpm install @serve.zone/remoteingress
 │   Network Edge      │  ◄══════════════════════════►  │   Private Cluster   │
 │                     │   (multiplexed frames +        │                     │
 │  RemoteIngressEdge  │    shared-secret auth)         │  RemoteIngressHub   │
-│  Listens on :80,:443│                                │  Forwards to        │
-│  Accepts client TCP │                                │  SmartProxy on      │
-│                     │                                │  local ports        │
+│  Accepts client TCP │                                │  Forwards to        │
+│  connections on     │                                │  SmartProxy on      │
+│  hub-assigned ports │                                │  local ports        │
 └─────────────────────┘                                └─────────────────────┘
        ▲                                                       │
        │  TCP from end users                                   ▼
@@ -28,26 +32,28 @@ pnpm install @serve.zone/remoteingress

 | Component | Role |
 |-----------|------|
-| **RemoteIngressEdge** | Deployed at the network edge (e.g. a VPS or cloud instance). Listens on public ports, accepts raw TCP connections, and multiplexes them over a single TLS tunnel to the hub. |
-| **RemoteIngressHub** | Deployed alongside DcRouter/SmartProxy in a private cluster. Accepts edge connections, demuxes streams, and forwards each to SmartProxy with a PROXY protocol v1 header so the real client IP is preserved. |
+| **RemoteIngressEdge** | Deployed at the network edge (e.g. a VPS or cloud instance). Listens on ports assigned by the hub, accepts raw TCP connections, and multiplexes them over a single TLS tunnel to the hub. Ports are hot-reloadable — the hub can change them at runtime. |
+| **RemoteIngressHub** | Deployed alongside DcRouter/SmartProxy in a private cluster. Accepts edge connections, demuxes streams, and forwards each to SmartProxy with a PROXY protocol v1 header so the real client IP is preserved. Controls which ports each edge listens on. |
 | **Rust Binary** (`remoteingress-bin`) | The performance-critical networking core. Managed via `@push.rocks/smartrust` RustBridge IPC — you never interact with it directly. Cross-compiled for `linux/amd64` and `linux/arm64`. |

-### Key Features
+### ✨ Key Features

- **TLS-encrypted tunnel** between edge and hub (auto-generated self-signed cert or bring your own)
- **Multiplexed streams** — thousands of client connections flow over a single tunnel
- **PROXY protocol v1** — SmartProxy sees the real client IP, not the tunnel IP
- **Shared-secret authentication** — edges must present valid credentials to connect
- **STUN-based public IP discovery** — the edge automatically discovers its public IP via Cloudflare STUN
- **Auto-reconnect** with exponential backoff if the tunnel drops
- **Event-driven** — both Hub and Edge extend `EventEmitter` for real-time monitoring
- **Rust core** — all frame encoding, TLS, and TCP proxying happen in native code for maximum throughput
+- 🔒 **TLS-encrypted tunnel** between edge and hub (auto-generated self-signed cert or bring your own)
+- 🔀 **Multiplexed streams** — thousands of client connections flow over a single tunnel
+- 🌐 **PROXY protocol v1** — SmartProxy sees the real client IP, not the tunnel IP
+- 🔑 **Shared-secret authentication** — edges must present valid credentials to connect
+- 🎫 **Connection tokens** — encode all connection details into a single opaque string
+- 📡 **STUN-based public IP discovery** — the edge automatically discovers its public IP via Cloudflare STUN
+- 🔄 **Auto-reconnect** with exponential backoff if the tunnel drops
+- 🎛️ **Dynamic port configuration** — the hub assigns listen ports per edge and can hot-reload them at runtime via `FRAME_CONFIG` frames
+- 📣 **Event-driven** — both Hub and Edge extend `EventEmitter` for real-time monitoring
+- ⚡ **Rust core** — all frame encoding, TLS, and TCP proxying happen in native code for maximum throughput

-## Usage
+## 🚀 Usage

 Both classes are imported from the package and communicate with the Rust binary under the hood. All you need to do is configure and start them.

-### Setting up the Hub (private cluster side)
+### Setting Up the Hub (Private Cluster Side)

 ```typescript
 import { RemoteIngressHub } from '@serve.zone/remoteingress';
@@ -74,10 +80,28 @@ await hub.start({
  targetHost: '127.0.0.1', // SmartProxy host to forward streams to (default: 127.0.0.1)
 });

-// Register which edges are allowed to connect
+// Register which edges are allowed to connect, including their listen ports
 await hub.updateAllowedEdges([
-  { id: 'edge-nyc-01', secret: 'supersecrettoken1' },
-  { id: 'edge-fra-02', secret: 'supersecrettoken2' },
+  {
+    id: 'edge-nyc-01',
+    secret: 'supersecrettoken1',
+    listenPorts: [80, 443],        // ports the edge should listen on
+    stunIntervalSecs: 300,         // STUN discovery interval (default: 300)
+  },
+  {
+    id: 'edge-fra-02',
+    secret: 'supersecrettoken2',
+    listenPorts: [443, 8080],
+  },
+]);
+
+// Dynamically update ports for a connected edge — changes are pushed instantly
+await hub.updateAllowedEdges([
+  {
+    id: 'edge-nyc-01',
+    secret: 'supersecrettoken1',
+    listenPorts: [80, 443, 8443],  // added port 8443 — edge picks it up in real time
+  },
 ]);

 // Check status at any time
@@ -95,32 +119,49 @@ console.log(status);
 await hub.stop();
 ```

-### Setting up the Edge (network edge side)
+### Setting Up the Edge (Network Edge Side)
+
+The edge can be configured in two ways: with an **opaque connection token** (recommended) or with explicit config fields.
+
+#### Option A: Connection Token (Recommended)
+
+A single token encodes all connection details — ideal for provisioning edges at scale:

 ```typescript
 import { RemoteIngressEdge } from '@serve.zone/remoteingress';

 const edge = new RemoteIngressEdge();

-// Listen for events
-edge.on('tunnelConnected', () => {
-  console.log('Tunnel to hub established');
-});
-edge.on('tunnelDisconnected', () => {
-  console.log('Tunnel to hub lost — will auto-reconnect');
-});
-edge.on('publicIpDiscovered', ({ ip }) => {
-  console.log(`Public IP: ${ip}`);
-});
+edge.on('tunnelConnected', () => console.log('Tunnel established'));
+edge.on('tunnelDisconnected', () => console.log('Tunnel lost — will auto-reconnect'));
+edge.on('publicIpDiscovered', ({ ip }) => console.log(`Public IP: ${ip}`));
+edge.on('portsAssigned', ({ listenPorts }) => console.log(`Listening on ports: ${listenPorts}`));
+edge.on('portsUpdated', ({ listenPorts }) => console.log(`Ports updated: ${listenPorts}`));
+
+// Single token contains hubHost, hubPort, edgeId, and secret
+await edge.start({
+  token: 'eyJoIjoiaHViLmV4YW1wbGUuY29tIiwicCI6ODQ0MywiZSI6ImVkZ2UtbnljLTAxIiwicyI6InN1cGVyc2VjcmV0dG9rZW4xIn0',
+});
+```
+
+#### Option B: Explicit Config
+
+```typescript
+import { RemoteIngressEdge } from '@serve.zone/remoteingress';
+
+const edge = new RemoteIngressEdge();
+
+edge.on('tunnelConnected', () => console.log('Tunnel established'));
+edge.on('tunnelDisconnected', () => console.log('Tunnel lost — will auto-reconnect'));
+edge.on('publicIpDiscovered', ({ ip }) => console.log(`Public IP: ${ip}`));
+edge.on('portsAssigned', ({ listenPorts }) => console.log(`Listening on ports: ${listenPorts}`));
+edge.on('portsUpdated', ({ listenPorts }) => console.log(`Ports updated: ${listenPorts}`));

-// Start the edge — it connects to the hub and starts listening for clients
 await edge.start({
  hubHost: 'hub.example.com',  // hostname or IP of the hub
  hubPort: 8443,               // must match hub's tunnelPort (default: 8443)
  edgeId: 'edge-nyc-01',       // unique edge identifier
  secret: 'supersecrettoken1', // must match the hub's allowed edge secret
-  listenPorts: [80, 443],      // public ports to accept TCP connections on
-  stunIntervalSecs: 300,       // STUN refresh interval in seconds (optional)
 });

 // Check status at any time
@@ -138,72 +179,185 @@ console.log(edgeStatus);
 await edge.stop();
 ```

-### API Reference
+### 🎫 Connection Tokens

-#### `RemoteIngressHub`
+Connection tokens let you distribute a single opaque string instead of four separate config values. The hub operator generates the token; the edge operator just pastes it in.
+
+```typescript
+import { encodeConnectionToken, decodeConnectionToken } from '@serve.zone/remoteingress';
+
+// Hub side: generate a token for a new edge
+const token = encodeConnectionToken({
+  hubHost: 'hub.example.com',
+  hubPort: 8443,
+  edgeId: 'edge-nyc-01',
+  secret: 'supersecrettoken1',
+});
+console.log(token);
+// => 'eyJoIjoiaHViLmV4YW1wbGUuY29tIiwi...'
+
+// Edge side: inspect a token (optional — start() does this automatically)
+const data = decodeConnectionToken(token);
+console.log(data);
+// {
+//   hubHost: 'hub.example.com',
+//   hubPort: 8443,
+//   edgeId: 'edge-nyc-01',
+//   secret: 'supersecrettoken1'
+// }
+```
+
+Tokens are base64url-encoded (URL-safe, no padding) — safe to pass as environment variables, CLI arguments, or store in config files.
+
+## 📖 API Reference
+
+### `RemoteIngressHub`

 | Method / Property | Description |
 |-------------------|-------------|
 | `start(config?)` | Spawns the Rust binary and starts the tunnel listener. Config: `{ tunnelPort?: number, targetHost?: string }` |
 | `stop()` | Gracefully shuts down the hub and kills the Rust process. |
-| `updateAllowedEdges(edges)` | Dynamically update which edges are authorized. Each edge: `{ id: string, secret: string }` |
+| `updateAllowedEdges(edges)` | Dynamically update which edges are authorized and what ports they listen on. Each edge: `{ id: string, secret: string, listenPorts?: number[], stunIntervalSecs?: number }`. If ports change for a connected edge, the update is pushed immediately via a `FRAME_CONFIG` frame. |
 | `getStatus()` | Returns current hub status including connected edges and active stream counts. |
 | `running` | `boolean` — whether the Rust binary is alive. |

 **Events:** `edgeConnected`, `edgeDisconnected`, `streamOpened`, `streamClosed`

-#### `RemoteIngressEdge`
+### `RemoteIngressEdge`

 | Method / Property | Description |
 |-------------------|-------------|
-| `start(config)` | Spawns the Rust binary, connects to the hub, and starts listening on the specified ports. |
+| `start(config)` | Spawns the Rust binary and connects to the hub. Accepts `{ token: string }` or `IEdgeConfig`. Listen ports are received from the hub during handshake. |
 | `stop()` | Gracefully shuts down the edge and kills the Rust process. |
-| `getStatus()` | Returns current edge status including connection state, public IP, and active streams. |
+| `getStatus()` | Returns current edge status including connection state, public IP, listen ports, and active streams. |
 | `running` | `boolean` — whether the Rust binary is alive. |

-**Events:** `tunnelConnected`, `tunnelDisconnected`, `publicIpDiscovered`
+**Events:** `tunnelConnected`, `tunnelDisconnected`, `publicIpDiscovered`, `portsAssigned`, `portsUpdated`

-### Wire Protocol
+### Token Utilities
+
+| Function | Description |
+|----------|-------------|
+| `encodeConnectionToken(data)` | Encodes `IConnectionTokenData` into a base64url token string. |
+| `decodeConnectionToken(token)` | Decodes a token back into `IConnectionTokenData`. Throws on malformed or incomplete tokens. |
+
+### Interfaces
+
+```typescript
+interface IHubConfig {
+  tunnelPort?: number;   // default: 8443
+  targetHost?: string;   // default: '127.0.0.1'
+}
+
+interface IEdgeConfig {
+  hubHost: string;
+  hubPort?: number;      // default: 8443
+  edgeId: string;
+  secret: string;
+}
+
+interface IConnectionTokenData {
+  hubHost: string;
+  hubPort: number;
+  edgeId: string;
+  secret: string;
+}
+```
+
+## 🔌 Wire Protocol

 The tunnel uses a custom binary frame protocol over TLS:

 ```
-[stream_id: 4 bytes][type: 1 byte][length: 4 bytes][payload: N bytes]
+[stream_id: 4 bytes BE][type: 1 byte][length: 4 bytes BE][payload: N bytes]
 ```

 | Frame Type | Value | Direction | Purpose |
 |------------|-------|-----------|---------|
-| `OPEN` | `0x01` | Edge -> Hub | Open a new stream; payload is PROXY v1 header |
-| `DATA` | `0x02` | Edge -> Hub | Client data flowing upstream |
-| `CLOSE` | `0x03` | Edge -> Hub | Client closed the connection |
-| `DATA_BACK` | `0x04` | Hub -> Edge | Response data flowing downstream |
-| `CLOSE_BACK` | `0x05` | Hub -> Edge | Upstream (SmartProxy) closed the connection |
+| `OPEN` | `0x01` | Edge → Hub | Open a new stream; payload is PROXY v1 header |
+| `DATA` | `0x02` | Edge → Hub | Client data flowing upstream |
+| `CLOSE` | `0x03` | Edge → Hub | Client closed the connection |
+| `DATA_BACK` | `0x04` | Hub → Edge | Response data flowing downstream |
+| `CLOSE_BACK` | `0x05` | Hub → Edge | Upstream (SmartProxy) closed the connection |
+| `CONFIG` | `0x06` | Hub → Edge | Runtime configuration update (e.g. port changes); payload is JSON |

-Max payload size per frame: **16 MB**.
+Max payload size per frame: **16 MB**. Stream IDs are 32-bit unsigned integers.

-### Example Scenarios
+### Handshake Sequence

-1. **Expose a private Kubernetes cluster to the internet** — Deploy an Edge on a public VPS, configure your DNS to point to the VPS IP. The Edge tunnels all traffic to the Hub running inside the cluster, which hands it off to SmartProxy/DcRouter. Your cluster stays fully private — no public-facing ports needed.
+1. Edge opens a TLS connection to the hub
+2. Edge sends: `EDGE <edgeId> <secret>\n`
+3. Hub verifies credentials (constant-time comparison) and responds with JSON: `{"listenPorts":[...],"stunIntervalSecs":300}\n`
+4. Edge starts TCP listeners on the assigned ports
+5. Frame protocol begins — `OPEN`/`DATA`/`CLOSE` frames flow in both directions
+6. Hub can push `CONFIG` frames at any time to update the edge's listen ports

-2. **Multi-region edge ingress** — Run multiple Edges in different geographic regions (NYC, Frankfurt, Tokyo) all connecting to a single Hub. Use GeoDNS to route users to their nearest Edge. The Hub sees the real client IPs via PROXY protocol regardless of which edge they connected through.
+## 💡 Example Scenarios

-3. **Secure API exposure** — Your backend runs on a private network with no direct internet access. An Edge on a minimal cloud instance acts as the only public entry point. TLS tunnel + shared-secret auth ensure only your authorized Edge can forward traffic.
+### 1. Expose a Private Kubernetes Cluster to the Internet
+
+Deploy an Edge on a public VPS, point your DNS to the VPS IP. The Edge tunnels all traffic to the Hub running inside the cluster, which hands it off to SmartProxy/DcRouter. Your cluster stays fully private — no public-facing ports needed.
+
+### 2. Multi-Region Edge Ingress
+
+Run multiple Edges in different geographic regions (NYC, Frankfurt, Tokyo) all connecting to a single Hub. Use GeoDNS to route users to their nearest Edge. The Hub sees the real client IPs via PROXY protocol regardless of which edge they connected through.
+
+### 3. Secure API Exposure
+
+Your backend runs on a private network with no direct internet access. An Edge on a minimal cloud instance acts as the only public entry point. TLS tunnel + shared-secret auth ensure only your authorized Edge can forward traffic.
+
+### 4. Token-Based Edge Provisioning
+
+Generate connection tokens on the hub side and distribute them to edge operators. Each edge only needs a single token string to connect — no manual configuration of host, port, ID, and secret.
+
+```typescript
+// Hub operator generates token
+const token = encodeConnectionToken({
+  hubHost: 'hub.prod.example.com',
+  hubPort: 8443,
+  edgeId: 'edge-tokyo-01',
+  secret: 'generated-secret-abc123',
+});
+// Send `token` to the edge operator via secure channel
+
+// Edge operator starts with just the token
+const edge = new RemoteIngressEdge();
+await edge.start({ token });
+```
+
+### 5. Dynamic Port Management
+
+The hub controls which ports each edge listens on. Ports can be changed at runtime without restarting the edge — the hub pushes a `CONFIG` frame and the edge hot-reloads its TCP listeners.
+
+```typescript
+// Initially assign ports 80 and 443
+await hub.updateAllowedEdges([
+  { id: 'edge-nyc-01', secret: 'secret', listenPorts: [80, 443] },
+]);
+
+// Later, add port 8080 — the connected edge picks it up instantly
+await hub.updateAllowedEdges([
+  { id: 'edge-nyc-01', secret: 'secret', listenPorts: [80, 443, 8080] },
+]);
+```

 ## License and Legal Information

-This repository contains open-source code that is licensed under the MIT License. A copy of the MIT License can be found in the [license](license) file within this repository.
+This repository contains open-source code licensed under the MIT License. A copy of the license can be found in the [LICENSE](./LICENSE) file.

 **Please note:** The MIT License does not grant permission to use the trade names, trademarks, service marks, or product names of the project, except as required for reasonable and customary use in describing the origin of the work and reproducing the content of the NOTICE file.

 ### Trademarks

-This project is owned and maintained by Task Venture Capital GmbH. The names and logos associated with Task Venture Capital GmbH and any related products or services are trademarks of Task Venture Capital GmbH and are not included within the scope of the MIT license granted herein. Use of these trademarks must comply with Task Venture Capital GmbH's Trademark Guidelines, and any usage must be approved in writing by Task Venture Capital GmbH.
+This project is owned and maintained by Task Venture Capital GmbH. The names and logos associated with Task Venture Capital GmbH and any related products or services are trademarks of Task Venture Capital GmbH or third parties, and are not included within the scope of the MIT license granted herein.
+
+Use of these trademarks must comply with Task Venture Capital GmbH's Trademark Guidelines or the guidelines of the respective third-party owners, and any usage must be approved in writing. Third-party trademarks used herein are the property of their respective owners and used only in a descriptive manner, e.g. for an implementation of an API or similar.

 ### Company Information

 Task Venture Capital GmbH
-Registered at District court Bremen HRB 35230 HB, Germany
+Registered at District Court Bremen HRB 35230 HB, Germany

-For any legal inquiries or if you require further information, please contact us via email at hello@task.vc.
+For any legal inquiries or further information, please contact us via email at hello@task.vc.

 By using this repository, you acknowledge that you have read this section, agree to comply with its terms, and understand that the licensing of the code does not imply endorsement by Task Venture Capital GmbH of any derivative works.
--- a/rust/Cargo.lock
+++ b/rust/Cargo.lock
@@ -234,6 +234,18 @@ version = "1.3.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "42703706b716c37f96a77aea830392ad231f44c9e9a67872fa5548707e11b11c"

+[[package]]
+name = "futures-core"
+version = "0.3.32"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "7e3450815272ef58cec6d564423f6e755e25379b217b0bc688e295ba24df6b1d"
+
+[[package]]
+name = "futures-sink"
+version = "0.3.32"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "c39754e157331b013978ec91992bde1ac089843443c49cbc7f46150b0fad0893"
+
 [[package]]
 name = "getrandom"
 version = "0.2.17"
@@ -315,6 +327,16 @@ version = "0.2.182"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "6800badb6cb2082ffd7b6a67e6125bb39f18782f793520caee8cb8846be06112"

+[[package]]
+name = "libmimalloc-sys"
+version = "0.1.44"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "667f4fec20f29dfc6bc7357c582d91796c169ad7e2fce709468aefeb2c099870"
+dependencies = [
+ "cc",
+ "libc",
+]
+
 [[package]]
 name = "lock_api"
 version = "0.4.14"
@@ -336,6 +358,15 @@ version = "2.8.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "f8ca58f447f06ed17d5fc4043ce1b10dd205e060fb3ce5b979b8ed8e59ff3f79"

+[[package]]
+name = "mimalloc"
+version = "0.1.48"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "e1ee66a4b64c74f4ef288bcbb9192ad9c3feaad75193129ac8509af543894fd8"
+dependencies = [
+ "libmimalloc-sys",
+]
+
 [[package]]
 name = "mio"
 version = "1.1.1"
@@ -507,6 +538,7 @@ dependencies = [
 "clap",
 "env_logger",
 "log",
+ "mimalloc",
 "remoteingress-core",
 "remoteingress-protocol",
 "rustls",
@@ -526,15 +558,19 @@ dependencies = [
 "rustls-pemfile",
 "serde",
 "serde_json",
+ "socket2 0.5.10",
 "tokio",
 "tokio-rustls",
+ "tokio-util",
 ]

 [[package]]
 name = "remoteingress-protocol"
 version = "2.0.0"
 dependencies = [
+ "log",
 "tokio",
+ "tokio-util",
 ]

 [[package]]
@@ -668,6 +704,16 @@ version = "1.15.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "67b1b7a3b5fe4f1376887184045fcf45c69e92af734b7aaddc05fb777b6fbd03"

+[[package]]
+name = "socket2"
+version = "0.5.10"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "e22376abed350d73dd1cd119b57ffccad95b4e585a7cda43e286245ce23c0678"
+dependencies = [
+ "libc",
+ "windows-sys 0.52.0",
+]
+
 [[package]]
 name = "socket2"
 version = "0.6.2"
@@ -732,7 +778,7 @@ dependencies = [
 "parking_lot",
 "pin-project-lite",
 "signal-hook-registry",
- "socket2",
+ "socket2 0.6.2",
 "tokio-macros",
 "windows-sys 0.61.2",
 ]
@@ -758,6 +804,19 @@ dependencies = [
 "tokio",
 ]

+[[package]]
+name = "tokio-util"
+version = "0.7.18"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "9ae9cec805b01e8fc3fd2fe289f89149a9b66dd16786abd8b19cfa7b48cb0098"
+dependencies = [
+ "bytes",
+ "futures-core",
+ "futures-sink",
+ "pin-project-lite",
+ "tokio",
+]
+
 [[package]]
 name = "unicode-ident"
 version = "1.0.24"
--- a/rust/crates/remoteingress-bin/Cargo.toml
+++ b/rust/crates/remoteingress-bin/Cargo.toml
@@ -17,3 +17,4 @@ serde_json = "1"
 log = "0.4"
 env_logger = "0.11"
 rustls = { version = "0.23", default-features = false, features = ["ring"] }
+mimalloc = "0.1"
--- a/rust/crates/remoteingress-bin/src/main.rs
+++ b/rust/crates/remoteingress-bin/src/main.rs
@@ -1,3 +1,6 @@
+#[global_allocator]
+static GLOBAL: mimalloc::MiMalloc = mimalloc::MiMalloc;
+
 use clap::Parser;
 use serde::{Deserialize, Serialize};
 use std::sync::Arc;
@@ -164,16 +167,16 @@ async fn handle_request(
                tokio::spawn(async move {
                    while let Some(event) = event_rx.recv().await {
                        match &event {
-                            HubEvent::EdgeConnected { edge_id } => {
+                            HubEvent::EdgeConnected { edge_id, peer_addr } => {
                                send_event(
                                    "edgeConnected",
-                                    serde_json::json!({ "edgeId": edge_id }),
+                                    serde_json::json!({ "edgeId": edge_id, "peerAddr": peer_addr }),
                                );
                            }
-                            HubEvent::EdgeDisconnected { edge_id } => {
+                            HubEvent::EdgeDisconnected { edge_id, reason } => {
                                send_event(
                                    "edgeDisconnected",
-                                    serde_json::json!({ "edgeId": edge_id }),
+                                    serde_json::json!({ "edgeId": edge_id, "reason": reason }),
                                );
                            }
                            HubEvent::StreamOpened {
@@ -292,8 +295,8 @@ async fn handle_request(
                            EdgeEvent::TunnelConnected => {
                                send_event("tunnelConnected", serde_json::json!({}));
                            }
-                            EdgeEvent::TunnelDisconnected => {
-                                send_event("tunnelDisconnected", serde_json::json!({}));
+                            EdgeEvent::TunnelDisconnected { reason } => {
+                                send_event("tunnelDisconnected", serde_json::json!({ "reason": reason }));
                            }
                            EdgeEvent::PublicIpDiscovered { ip } => {
                                send_event(
@@ -301,6 +304,18 @@ async fn handle_request(
                                    serde_json::json!({ "ip": ip }),
                                );
                            }
+                            EdgeEvent::PortsAssigned { listen_ports } => {
+                                send_event(
+                                    "portsAssigned",
+                                    serde_json::json!({ "listenPorts": listen_ports }),
+                                );
+                            }
+                            EdgeEvent::PortsUpdated { listen_ports } => {
+                                send_event(
+                                    "portsUpdated",
+                                    serde_json::json!({ "listenPorts": listen_ports }),
+                                );
+                            }
                        }
                    }
                });
@@ -357,3 +372,58 @@ async fn handle_request(
        }
    }
 }
+
+#[cfg(test)]
+mod tests {
+    use super::*;
+
+    #[test]
+    fn test_ipc_request_deserialize() {
+        let json = r#"{"id": "1", "method": "ping", "params": {}}"#;
+        let req: IpcRequest = serde_json::from_str(json).unwrap();
+        assert_eq!(req.id, "1");
+        assert_eq!(req.method, "ping");
+        assert!(req.params.is_object());
+    }
+
+    #[test]
+    fn test_ipc_response_skip_error_when_none() {
+        let resp = IpcResponse {
+            id: "1".to_string(),
+            success: true,
+            result: Some(serde_json::json!({"pong": true})),
+            error: None,
+        };
+        let json = serde_json::to_value(&resp).unwrap();
+        assert_eq!(json["id"], "1");
+        assert_eq!(json["success"], true);
+        assert_eq!(json["result"]["pong"], true);
+        assert!(json.get("error").is_none());
+    }
+
+    #[test]
+    fn test_ipc_response_skip_result_when_none() {
+        let resp = IpcResponse {
+            id: "2".to_string(),
+            success: false,
+            result: None,
+            error: Some("something failed".to_string()),
+        };
+        let json = serde_json::to_value(&resp).unwrap();
+        assert_eq!(json["id"], "2");
+        assert_eq!(json["success"], false);
+        assert_eq!(json["error"], "something failed");
+        assert!(json.get("result").is_none());
+    }
+
+    #[test]
+    fn test_ipc_event_serialize() {
+        let evt = IpcEvent {
+            event: "ready".to_string(),
+            data: serde_json::json!({"version": "2.0.0"}),
+        };
+        let json = serde_json::to_value(&evt).unwrap();
+        assert_eq!(json["event"], "ready");
+        assert_eq!(json["data"]["version"], "2.0.0");
+    }
+}
--- a/rust/crates/remoteingress-core/Cargo.toml
+++ b/rust/crates/remoteingress-core/Cargo.toml
@@ -13,3 +13,5 @@ serde = { version = "1", features = ["derive"] }
 serde_json = "1"
 log = "0.4"
 rustls-pemfile = "2"
+tokio-util = "0.7"
+socket2 = "0.5"
--- a/rust/crates/remoteingress-core/src/edge.rs
+++ b/rust/crates/remoteingress-core/src/edge.rs
--- a/rust/crates/remoteingress-core/src/hub.rs
+++ b/rust/crates/remoteingress-core/src/hub.rs
--- a/rust/crates/remoteingress-core/src/stun.rs
+++ b/rust/crates/remoteingress-core/src/stun.rs
@@ -121,6 +121,133 @@ fn parse_stun_response(data: &[u8], _txn_id: &[u8; 12]) -> Option<String> {
    None
 }

+#[cfg(test)]
+mod tests {
+    use super::*;
+
+    /// Build a synthetic STUN Binding Response with given attributes.
+    fn build_stun_response(attrs: &[(u16, &[u8])]) -> Vec<u8> {
+        let mut attrs_bytes = Vec::new();
+        for &(attr_type, attr_data) in attrs {
+            attrs_bytes.extend_from_slice(&attr_type.to_be_bytes());
+            attrs_bytes.extend_from_slice(&(attr_data.len() as u16).to_be_bytes());
+            attrs_bytes.extend_from_slice(attr_data);
+            // Pad to 4-byte boundary
+            let pad = (4 - (attr_data.len() % 4)) % 4;
+            attrs_bytes.extend(std::iter::repeat(0u8).take(pad));
+        }
+
+        let mut response = Vec::new();
+        // msg_type = 0x0101 (Binding Response)
+        response.extend_from_slice(&0x0101u16.to_be_bytes());
+        // message length
+        response.extend_from_slice(&(attrs_bytes.len() as u16).to_be_bytes());
+        // magic cookie
+        response.extend_from_slice(&STUN_MAGIC_COOKIE.to_be_bytes());
+        // transaction ID (12 bytes)
+        response.extend_from_slice(&[0u8; 12]);
+        // attributes
+        response.extend_from_slice(&attrs_bytes);
+        response
+    }
+
+    #[test]
+    fn test_xor_mapped_address_ipv4() {
+        // IP 203.0.113.1 = 0xCB007101, XOR'd with magic 0x2112A442 = 0xEA12D543
+        let attr_data: [u8; 8] = [
+            0x00, 0x01, // reserved + family (IPv4)
+            0x11, 0x2B, // port XOR'd with 0x2112 (port 0x3039 = 12345)
+            0xEA, 0x12, 0xD5, 0x43, // IP XOR'd
+        ];
+        let data = build_stun_response(&[(ATTR_XOR_MAPPED_ADDRESS, &attr_data)]);
+        let txn_id = [0u8; 12];
+        let result = parse_stun_response(&data, &txn_id);
+        assert_eq!(result, Some("203.0.113.1".to_string()));
+    }
+
+    #[test]
+    fn test_mapped_address_fallback_ipv4() {
+        // IP 192.168.1.1 = 0xC0A80101 (no XOR)
+        let attr_data: [u8; 8] = [
+            0x00, 0x01, // reserved + family (IPv4)
+            0x00, 0x50, // port 80
+            0xC0, 0xA8, 0x01, 0x01, // IP
+        ];
+        let data = build_stun_response(&[(ATTR_MAPPED_ADDRESS, &attr_data)]);
+        let txn_id = [0u8; 12];
+        let result = parse_stun_response(&data, &txn_id);
+        assert_eq!(result, Some("192.168.1.1".to_string()));
+    }
+
+    #[test]
+    fn test_response_too_short() {
+        let data = vec![0u8; 19]; // < 20 bytes
+        let txn_id = [0u8; 12];
+        assert_eq!(parse_stun_response(&data, &txn_id), None);
+    }
+
+    #[test]
+    fn test_wrong_msg_type() {
+        // Build with correct helper then overwrite msg_type to 0x0001 (Binding Request)
+        let mut data = build_stun_response(&[]);
+        data[0] = 0x00;
+        data[1] = 0x01;
+        let txn_id = [0u8; 12];
+        assert_eq!(parse_stun_response(&data, &txn_id), None);
+    }
+
+    #[test]
+    fn test_no_mapped_address_attributes() {
+        // Valid response with no attributes
+        let data = build_stun_response(&[]);
+        let txn_id = [0u8; 12];
+        assert_eq!(parse_stun_response(&data, &txn_id), None);
+    }
+
+    #[test]
+    fn test_xor_preferred_over_mapped() {
+        // XOR gives 203.0.113.1, MAPPED gives 192.168.1.1
+        let xor_data: [u8; 8] = [
+            0x00, 0x01,
+            0x11, 0x2B,
+            0xEA, 0x12, 0xD5, 0x43,
+        ];
+        let mapped_data: [u8; 8] = [
+            0x00, 0x01,
+            0x00, 0x50,
+            0xC0, 0xA8, 0x01, 0x01,
+        ];
+        // XOR listed first — should be preferred
+        let data = build_stun_response(&[
+            (ATTR_XOR_MAPPED_ADDRESS, &xor_data),
+            (ATTR_MAPPED_ADDRESS, &mapped_data),
+        ]);
+        let txn_id = [0u8; 12];
+        let result = parse_stun_response(&data, &txn_id);
+        assert_eq!(result, Some("203.0.113.1".to_string()));
+    }
+
+    #[test]
+    fn test_truncated_attribute_data() {
+        // Attribute claims 8 bytes but only 4 are present
+        let mut data = build_stun_response(&[]);
+        // Manually append a truncated XOR_MAPPED_ADDRESS attribute
+        let attr_type = ATTR_XOR_MAPPED_ADDRESS.to_be_bytes();
+        let attr_len = 8u16.to_be_bytes(); // claims 8 bytes
+        let truncated = [0x00, 0x01, 0x11, 0x2B]; // only 4 bytes
+        // Update message length
+        let new_msg_len = (attr_type.len() + attr_len.len() + truncated.len()) as u16;
+        data[2..4].copy_from_slice(&new_msg_len.to_be_bytes());
+        data.extend_from_slice(&attr_type);
+        data.extend_from_slice(&attr_len);
+        data.extend_from_slice(&truncated);
+
+        let txn_id = [0u8; 12];
+        // Should return None, not panic
+        assert_eq!(parse_stun_response(&data, &txn_id), None);
+    }
+}
+
 /// Generate 12 random bytes for transaction ID.
 fn rand_bytes() -> [u8; 12] {
    let mut bytes = [0u8; 12];
--- a/rust/crates/remoteingress-protocol/Cargo.toml
+++ b/rust/crates/remoteingress-protocol/Cargo.toml
@@ -4,4 +4,9 @@ version = "2.0.0"
 edition = "2021"

 [dependencies]
-tokio = { version = "1", features = ["io-util"] }
+tokio = { version = "1", features = ["io-util", "sync", "time"] }
+tokio-util = "0.7"
+log = "0.4"
+
+[dev-dependencies]
+tokio = { version = "1", features = ["io-util", "macros", "rt"] }
--- a/rust/crates/remoteingress-protocol/src/lib.rs
+++ b/rust/crates/remoteingress-protocol/src/lib.rs
@@ -1,4 +1,8 @@
-use tokio::io::{AsyncRead, AsyncReadExt};
+use std::collections::VecDeque;
+use std::future::Future;
+use std::pin::Pin;
+use std::task::{Context, Poll};
+use tokio::io::{AsyncRead, AsyncReadExt, AsyncWrite, ReadBuf};

 // Frame type constants
 pub const FRAME_OPEN: u8 = 0x01;
@@ -6,6 +10,11 @@ pub const FRAME_DATA: u8 = 0x02;
 pub const FRAME_CLOSE: u8 = 0x03;
 pub const FRAME_DATA_BACK: u8 = 0x04;
 pub const FRAME_CLOSE_BACK: u8 = 0x05;
+pub const FRAME_CONFIG: u8 = 0x06;     // Hub -> Edge: configuration update
+pub const FRAME_PING: u8 = 0x07;       // Hub -> Edge: heartbeat probe
+pub const FRAME_PONG: u8 = 0x08;       // Edge -> Hub: heartbeat response
+pub const FRAME_WINDOW_UPDATE: u8 = 0x09;      // Edge -> Hub: per-stream flow control
+pub const FRAME_WINDOW_UPDATE_BACK: u8 = 0x0A;  // Hub -> Edge: per-stream flow control

 // Frame header size: 4 (stream_id) + 1 (type) + 4 (length) = 9 bytes
 pub const FRAME_HEADER_SIZE: usize = 9;
@@ -13,6 +22,37 @@ pub const FRAME_HEADER_SIZE: usize = 9;
 // Maximum payload size (16 MB)
 pub const MAX_PAYLOAD_SIZE: u32 = 16 * 1024 * 1024;

+// Per-stream flow control constants
+/// Initial per-stream window size (4 MB). Sized for full throughput at high RTT:
+/// at 100ms RTT, this sustains ~40 MB/s per stream.
+pub const INITIAL_STREAM_WINDOW: u32 = 4 * 1024 * 1024;
+/// Send WINDOW_UPDATE after consuming this many bytes (half the initial window).
+pub const WINDOW_UPDATE_THRESHOLD: u32 = INITIAL_STREAM_WINDOW / 2;
+/// Maximum window size to prevent overflow.
+pub const MAX_WINDOW_SIZE: u32 = 16 * 1024 * 1024;
+
+/// Encode a WINDOW_UPDATE frame for a specific stream.
+pub fn encode_window_update(stream_id: u32, frame_type: u8, increment: u32) -> Vec<u8> {
+    encode_frame(stream_id, frame_type, &increment.to_be_bytes())
+}
+
+/// Compute the target per-stream window size based on the number of active streams.
+/// Total memory budget is ~32MB shared across all streams. As more streams are active,
+/// each gets a smaller window. This adapts to current demand — few streams get high
+/// throughput, many streams save memory and reduce control frame pressure.
+pub fn compute_window_for_stream_count(active: u32) -> u32 {
+    let per_stream = (32 * 1024 * 1024u64) / (active.max(1) as u64);
+    per_stream.clamp(64 * 1024, INITIAL_STREAM_WINDOW as u64) as u32
+}
+
+/// Decode a WINDOW_UPDATE payload into a byte increment. Returns None if payload is malformed.
+pub fn decode_window_update(payload: &[u8]) -> Option<u32> {
+    if payload.len() != 4 {
+        return None;
+    }
+    Some(u32::from_be_bytes([payload[0], payload[1], payload[2], payload[3]]))
+}
+
 /// A single multiplexed frame.
 #[derive(Debug, Clone)]
 pub struct Frame {
@@ -32,6 +72,16 @@ pub fn encode_frame(stream_id: u32, frame_type: u8, payload: &[u8]) -> Vec<u8> {
    buf
 }

+/// Write a frame header into `buf[0..FRAME_HEADER_SIZE]`.
+/// The caller must ensure payload is already at `buf[FRAME_HEADER_SIZE..FRAME_HEADER_SIZE + payload_len]`.
+/// This enables zero-copy encoding: read directly into `buf[FRAME_HEADER_SIZE..]`, then
+/// prepend the header without copying the payload.
+pub fn encode_frame_header(buf: &mut [u8], stream_id: u32, frame_type: u8, payload_len: usize) {
+    buf[0..4].copy_from_slice(&stream_id.to_be_bytes());
+    buf[4] = frame_type;
+    buf[5..9].copy_from_slice(&(payload_len as u32).to_be_bytes());
+}
+
 /// Build a PROXY protocol v1 header line.
 /// Format: `PROXY TCP4 <client_ip> <edge_ip> <client_port> <dest_port>\r\n`
 pub fn build_proxy_v1_header(
@@ -84,9 +134,13 @@ impl<R: AsyncRead + Unpin> FrameReader<R> {
        ]);

        if length > MAX_PAYLOAD_SIZE {
+            log::error!(
+                "CORRUPT FRAME HEADER: raw={:02x?} stream_id={} type=0x{:02x} length={}",
+                self.header_buf, stream_id, frame_type, length
+            );
            return Err(std::io::Error::new(
                std::io::ErrorKind::InvalidData,
-                format!("frame payload too large: {} bytes", length),
+                format!("frame payload too large: {} bytes (header={:02x?})", length, self.header_buf),
            ));
        }

@@ -108,10 +162,303 @@ impl<R: AsyncRead + Unpin> FrameReader<R> {
    }
 }

+// ---------------------------------------------------------------------------
+// TunnelIo: single-owner I/O multiplexer for the TLS tunnel connection
+// ---------------------------------------------------------------------------
+
+/// Events produced by the TunnelIo event loop.
+#[derive(Debug)]
+pub enum TunnelEvent {
+    /// A complete frame was read from the remote side.
+    Frame(Frame),
+    /// The remote side closed the connection (EOF).
+    Eof,
+    /// A read error occurred.
+    ReadError(std::io::Error),
+    /// A write error occurred.
+    WriteError(std::io::Error),
+    /// No frames received for the liveness timeout duration.
+    LivenessTimeout,
+    /// The cancellation token was triggered.
+    Cancelled,
+}
+
+/// Write state extracted into a sub-struct so the borrow checker can see
+/// disjoint field access between `self.write` and `self.stream`.
+struct WriteState {
+    ctrl_queue: VecDeque<Vec<u8>>,   // PONG, WINDOW_UPDATE, CLOSE, OPEN — always first
+    data_queue: VecDeque<Vec<u8>>,   // DATA, DATA_BACK — only when ctrl is empty
+    offset: usize,                   // progress within current frame being written
+    flush_needed: bool,
+}
+
+impl WriteState {
+    fn has_work(&self) -> bool {
+        !self.ctrl_queue.is_empty() || !self.data_queue.is_empty()
+    }
+}
+
+/// Single-owner I/O engine for the tunnel TLS connection.
+///
+/// Owns the TLS stream directly — no `tokio::io::split()`, no mutex.
+/// Uses two priority write queues: ctrl frames (PONG, WINDOW_UPDATE, CLOSE, OPEN)
+/// are ALWAYS written before data frames (DATA, DATA_BACK). This prevents
+/// WINDOW_UPDATE starvation that causes flow control deadlocks.
+pub struct TunnelIo<S> {
+    stream: S,
+    // Read state: accumulate bytes, parse frames incrementally
+    read_buf: Vec<u8>,
+    read_pos: usize,
+    parse_pos: usize,
+    // Write state: extracted sub-struct for safe disjoint borrows
+    write: WriteState,
+}
+
+impl<S: AsyncRead + AsyncWrite + Unpin> TunnelIo<S> {
+    pub fn new(stream: S, initial_data: Vec<u8>) -> Self {
+        let read_pos = initial_data.len();
+        let mut read_buf = initial_data;
+        if read_buf.capacity() < 65536 {
+            read_buf.reserve(65536 - read_buf.len());
+        }
+        Self {
+            stream,
+            read_buf,
+            read_pos,
+            parse_pos: 0,
+            write: WriteState {
+                ctrl_queue: VecDeque::new(),
+                data_queue: VecDeque::new(),
+                offset: 0,
+                flush_needed: false,
+            },
+        }
+    }
+
+    /// Queue a high-priority control frame (PONG, WINDOW_UPDATE, CLOSE, OPEN).
+    pub fn queue_ctrl(&mut self, frame: Vec<u8>) {
+        self.write.ctrl_queue.push_back(frame);
+    }
+
+    /// Queue a lower-priority data frame (DATA, DATA_BACK).
+    pub fn queue_data(&mut self, frame: Vec<u8>) {
+        self.write.data_queue.push_back(frame);
+    }
+
+    /// Try to parse a complete frame from the read buffer.
+    /// Uses a parse_pos cursor to avoid drain() on every frame.
+    pub fn try_parse_frame(&mut self) -> Option<Result<Frame, std::io::Error>> {
+        let available = self.read_pos - self.parse_pos;
+        if available < FRAME_HEADER_SIZE {
+            return None;
+        }
+
+        let base = self.parse_pos;
+        let stream_id = u32::from_be_bytes([
+            self.read_buf[base], self.read_buf[base + 1],
+            self.read_buf[base + 2], self.read_buf[base + 3],
+        ]);
+        let frame_type = self.read_buf[base + 4];
+        let length = u32::from_be_bytes([
+            self.read_buf[base + 5], self.read_buf[base + 6],
+            self.read_buf[base + 7], self.read_buf[base + 8],
+        ]);
+
+        if length > MAX_PAYLOAD_SIZE {
+            let header = [
+                self.read_buf[base], self.read_buf[base + 1],
+                self.read_buf[base + 2], self.read_buf[base + 3],
+                self.read_buf[base + 4], self.read_buf[base + 5],
+                self.read_buf[base + 6], self.read_buf[base + 7],
+                self.read_buf[base + 8],
+            ];
+            log::error!(
+                "CORRUPT FRAME HEADER: raw={:02x?} stream_id={} type=0x{:02x} length={}",
+                header, stream_id, frame_type, length
+            );
+            return Some(Err(std::io::Error::new(
+                std::io::ErrorKind::InvalidData,
+                format!("frame payload too large: {} bytes (header={:02x?})", length, header),
+            )));
+        }
+
+        let total_frame_size = FRAME_HEADER_SIZE + length as usize;
+        if available < total_frame_size {
+            return None;
+        }
+
+        let payload = self.read_buf[base + FRAME_HEADER_SIZE..base + total_frame_size].to_vec();
+        self.parse_pos += total_frame_size;
+
+        // Compact when parse_pos > half the data to reclaim memory
+        if self.parse_pos > self.read_pos / 2 && self.parse_pos > 0 {
+            self.read_buf.drain(..self.parse_pos);
+            self.read_pos -= self.parse_pos;
+            self.parse_pos = 0;
+        }
+
+        Some(Ok(Frame { stream_id, frame_type, payload }))
+    }
+
+    /// Poll-based I/O step. Returns Ready on events, Pending when idle.
+    ///
+    /// Order: write(ctrl→data) → flush → read → channels → timers
+    pub fn poll_step(
+        &mut self,
+        cx: &mut Context<'_>,
+        ctrl_rx: &mut tokio::sync::mpsc::Receiver<Vec<u8>>,
+        data_rx: &mut tokio::sync::mpsc::Receiver<Vec<u8>>,
+        liveness_deadline: &mut Pin<Box<tokio::time::Sleep>>,
+        cancel_token: &tokio_util::sync::CancellationToken,
+    ) -> Poll<TunnelEvent> {
+        // 1. WRITE: drain ctrl queue first, then data queue.
+        //    TLS poll_write writes plaintext to session buffer (always Ready).
+        //    Batch up to 16 frames per poll cycle.
+        //    Safe: `self.write` and `self.stream` are disjoint fields.
+        let mut writes = 0;
+        while self.write.has_work() && writes < 16 {
+            let from_ctrl = !self.write.ctrl_queue.is_empty();
+            let frame = if from_ctrl {
+                self.write.ctrl_queue.front().unwrap()
+            } else {
+                self.write.data_queue.front().unwrap()
+            };
+            let remaining = &frame[self.write.offset..];
+
+            match Pin::new(&mut self.stream).poll_write(cx, remaining) {
+                Poll::Ready(Ok(0)) => {
+                    return Poll::Ready(TunnelEvent::WriteError(
+                        std::io::Error::new(std::io::ErrorKind::WriteZero, "write zero"),
+                    ));
+                }
+                Poll::Ready(Ok(n)) => {
+                    self.write.offset += n;
+                    self.write.flush_needed = true;
+                    if self.write.offset >= frame.len() {
+                        if from_ctrl { self.write.ctrl_queue.pop_front(); }
+                        else { self.write.data_queue.pop_front(); }
+                        self.write.offset = 0;
+                        writes += 1;
+                    }
+                }
+                Poll::Ready(Err(e)) => return Poll::Ready(TunnelEvent::WriteError(e)),
+                Poll::Pending => break,
+            }
+        }
+
+        // 2. FLUSH: push encrypted data from TLS session to TCP.
+        if self.write.flush_needed {
+            match Pin::new(&mut self.stream).poll_flush(cx) {
+                Poll::Ready(Ok(())) => self.write.flush_needed = false,
+                Poll::Ready(Err(e)) => return Poll::Ready(TunnelEvent::WriteError(e)),
+                Poll::Pending => {} // TCP waker will notify us
+            }
+        }
+
+        // 3. READ: drain stream until Pending to ensure the TCP waker is always registered.
+        //    Without this loop, a Ready return with partial frame data would consume
+        //    the waker without re-registering it, causing the task to sleep until a
+        //    timer or channel wakes it (potentially 15+ seconds of lost reads).
+        loop {
+            // Compact if needed to make room for reads
+            if self.parse_pos > 0 && self.read_buf.len() - self.read_pos < 32768 {
+                self.read_buf.drain(..self.parse_pos);
+                self.read_pos -= self.parse_pos;
+                self.parse_pos = 0;
+            }
+            if self.read_buf.len() < self.read_pos + 32768 {
+                self.read_buf.resize(self.read_pos + 32768, 0);
+            }
+            let mut rbuf = ReadBuf::new(&mut self.read_buf[self.read_pos..]);
+            match Pin::new(&mut self.stream).poll_read(cx, &mut rbuf) {
+                Poll::Ready(Ok(())) => {
+                    let n = rbuf.filled().len();
+                    if n == 0 {
+                        return Poll::Ready(TunnelEvent::Eof);
+                    }
+                    self.read_pos += n;
+                    if let Some(result) = self.try_parse_frame() {
+                        return match result {
+                            Ok(frame) => Poll::Ready(TunnelEvent::Frame(frame)),
+                            Err(e) => Poll::Ready(TunnelEvent::ReadError(e)),
+                        };
+                    }
+                    // Partial data — loop to call poll_read again so the TCP
+                    // waker is re-registered when it finally returns Pending.
+                }
+                Poll::Ready(Err(e)) => return Poll::Ready(TunnelEvent::ReadError(e)),
+                Poll::Pending => break,
+            }
+        }
+
+        // 4. CHANNELS: drain ctrl into ctrl_queue, data into data_queue.
+        let mut got_new = false;
+        loop {
+            match ctrl_rx.poll_recv(cx) {
+                Poll::Ready(Some(frame)) => { self.write.ctrl_queue.push_back(frame); got_new = true; }
+                Poll::Ready(None) => {
+                    return Poll::Ready(TunnelEvent::WriteError(
+                        std::io::Error::new(std::io::ErrorKind::BrokenPipe, "ctrl channel closed"),
+                    ));
+                }
+                Poll::Pending => break,
+            }
+        }
+        loop {
+            match data_rx.poll_recv(cx) {
+                Poll::Ready(Some(frame)) => { self.write.data_queue.push_back(frame); got_new = true; }
+                Poll::Ready(None) => {
+                    return Poll::Ready(TunnelEvent::WriteError(
+                        std::io::Error::new(std::io::ErrorKind::BrokenPipe, "data channel closed"),
+                    ));
+                }
+                Poll::Pending => break,
+            }
+        }
+
+        // 5. TIMERS
+        if liveness_deadline.as_mut().poll(cx).is_ready() {
+            return Poll::Ready(TunnelEvent::LivenessTimeout);
+        }
+        if cancel_token.is_cancelled() {
+            return Poll::Ready(TunnelEvent::Cancelled);
+        }
+
+        // 6. SELF-WAKE: only when we have frames AND flush is done.
+        //    If flush is pending, the TCP write-readiness waker will notify us.
+        //    If we got new channel frames, wake to write them.
+        if got_new || (!self.write.flush_needed && self.write.has_work()) {
+            cx.waker().wake_by_ref();
+        }
+
+        Poll::Pending
+    }
+
+    pub fn into_inner(self) -> S {
+        self.stream
+    }
+}
+
 #[cfg(test)]
 mod tests {
    use super::*;

+    #[test]
+    fn test_encode_frame_header() {
+        let payload = b"hello";
+        let mut buf = vec![0u8; FRAME_HEADER_SIZE + payload.len()];
+        buf[FRAME_HEADER_SIZE..].copy_from_slice(payload);
+        encode_frame_header(&mut buf, 42, FRAME_DATA, payload.len());
+        assert_eq!(buf, encode_frame(42, FRAME_DATA, payload));
+    }
+
+    #[test]
+    fn test_encode_frame_header_empty_payload() {
+        let mut buf = vec![0u8; FRAME_HEADER_SIZE];
+        encode_frame_header(&mut buf, 99, FRAME_CLOSE, 0);
+        assert_eq!(buf, encode_frame(99, FRAME_CLOSE, &[]));
+    }
+
    #[test]
    fn test_encode_frame() {
        let data = b"hello";
@@ -169,4 +516,274 @@ mod tests {
        // EOF
        assert!(reader.next_frame().await.unwrap().is_none());
    }
+
+    #[test]
+    fn test_encode_frame_config_type() {
+        let payload = b"{\"listenPorts\":[443]}";
+        let encoded = encode_frame(0, FRAME_CONFIG, payload);
+        assert_eq!(encoded[4], FRAME_CONFIG);
+        assert_eq!(&encoded[0..4], &0u32.to_be_bytes());
+        assert_eq!(&encoded[9..], payload.as_slice());
+    }
+
+    #[test]
+    fn test_encode_frame_data_back_type() {
+        let payload = b"response data";
+        let encoded = encode_frame(7, FRAME_DATA_BACK, payload);
+        assert_eq!(encoded[4], FRAME_DATA_BACK);
+        assert_eq!(&encoded[0..4], &7u32.to_be_bytes());
+        assert_eq!(&encoded[5..9], &(payload.len() as u32).to_be_bytes());
+        assert_eq!(&encoded[9..], payload.as_slice());
+    }
+
+    #[test]
+    fn test_encode_frame_close_back_type() {
+        let encoded = encode_frame(99, FRAME_CLOSE_BACK, &[]);
+        assert_eq!(encoded[4], FRAME_CLOSE_BACK);
+        assert_eq!(&encoded[0..4], &99u32.to_be_bytes());
+        assert_eq!(&encoded[5..9], &0u32.to_be_bytes());
+        assert_eq!(encoded.len(), FRAME_HEADER_SIZE);
+    }
+
+    #[test]
+    fn test_encode_frame_large_stream_id() {
+        let encoded = encode_frame(u32::MAX, FRAME_DATA, b"x");
+        assert_eq!(&encoded[0..4], &u32::MAX.to_be_bytes());
+        assert_eq!(encoded[4], FRAME_DATA);
+        assert_eq!(&encoded[5..9], &1u32.to_be_bytes());
+        assert_eq!(encoded[9], b'x');
+    }
+
+    #[tokio::test]
+    async fn test_frame_reader_max_payload_rejection() {
+        let mut data = Vec::new();
+        data.extend_from_slice(&1u32.to_be_bytes());
+        data.push(FRAME_DATA);
+        data.extend_from_slice(&(MAX_PAYLOAD_SIZE + 1).to_be_bytes());
+
+        let cursor = std::io::Cursor::new(data);
+        let mut reader = FrameReader::new(cursor);
+
+        let result = reader.next_frame().await;
+        assert!(result.is_err());
+        let err = result.unwrap_err();
+        assert_eq!(err.kind(), std::io::ErrorKind::InvalidData);
+    }
+
+    #[tokio::test]
+    async fn test_frame_reader_eof_mid_header() {
+        // Only 5 bytes — not enough for a 9-byte header
+        let data = vec![0u8; 5];
+        let cursor = std::io::Cursor::new(data);
+        let mut reader = FrameReader::new(cursor);
+
+        // Should return Ok(None) on partial header EOF
+        let result = reader.next_frame().await;
+        assert!(result.unwrap().is_none());
+    }
+
+    #[tokio::test]
+    async fn test_frame_reader_eof_mid_payload() {
+        // Full header claiming 100 bytes of payload, but only 10 bytes present
+        let mut data = Vec::new();
+        data.extend_from_slice(&1u32.to_be_bytes());
+        data.push(FRAME_DATA);
+        data.extend_from_slice(&100u32.to_be_bytes());
+        data.extend_from_slice(&[0xAB; 10]);
+
+        let cursor = std::io::Cursor::new(data);
+        let mut reader = FrameReader::new(cursor);
+
+        let result = reader.next_frame().await;
+        assert!(result.is_err());
+    }
+
+    #[tokio::test]
+    async fn test_frame_reader_all_frame_types() {
+        let types = [
+            FRAME_OPEN,
+            FRAME_DATA,
+            FRAME_CLOSE,
+            FRAME_DATA_BACK,
+            FRAME_CLOSE_BACK,
+            FRAME_CONFIG,
+            FRAME_PING,
+            FRAME_PONG,
+        ];
+
+        let mut data = Vec::new();
+        for (i, &ft) in types.iter().enumerate() {
+            let payload = format!("payload_{}", i);
+            data.extend_from_slice(&encode_frame(i as u32, ft, payload.as_bytes()));
+        }
+
+        let cursor = std::io::Cursor::new(data);
+        let mut reader = FrameReader::new(cursor);
+
+        for (i, &ft) in types.iter().enumerate() {
+            let frame = reader.next_frame().await.unwrap().unwrap();
+            assert_eq!(frame.stream_id, i as u32);
+            assert_eq!(frame.frame_type, ft);
+            assert_eq!(frame.payload, format!("payload_{}", i).as_bytes());
+        }
+
+        assert!(reader.next_frame().await.unwrap().is_none());
+    }
+
+    #[tokio::test]
+    async fn test_frame_reader_zero_length_payload() {
+        let data = encode_frame(42, FRAME_CLOSE, &[]);
+        let cursor = std::io::Cursor::new(data);
+        let mut reader = FrameReader::new(cursor);
+
+        let frame = reader.next_frame().await.unwrap().unwrap();
+        assert_eq!(frame.stream_id, 42);
+        assert_eq!(frame.frame_type, FRAME_CLOSE);
+        assert!(frame.payload.is_empty());
+    }
+
+    #[test]
+    fn test_encode_frame_ping_pong() {
+        // PING: stream_id=0, empty payload (control frame)
+        let ping = encode_frame(0, FRAME_PING, &[]);
+        assert_eq!(ping[4], FRAME_PING);
+        assert_eq!(&ping[0..4], &0u32.to_be_bytes());
+        assert_eq!(ping.len(), FRAME_HEADER_SIZE);
+
+        // PONG: stream_id=0, empty payload (control frame)
+        let pong = encode_frame(0, FRAME_PONG, &[]);
+        assert_eq!(pong[4], FRAME_PONG);
+        assert_eq!(&pong[0..4], &0u32.to_be_bytes());
+        assert_eq!(pong.len(), FRAME_HEADER_SIZE);
+    }
+
+    // --- compute_window_for_stream_count tests ---
+
+    #[test]
+    fn test_adaptive_window_zero_streams() {
+        // 0 streams treated as 1: 32MB/1 = 32MB → clamped to 4MB max
+        assert_eq!(compute_window_for_stream_count(0), INITIAL_STREAM_WINDOW);
+    }
+
+    #[test]
+    fn test_adaptive_window_one_stream() {
+        // 32MB/1 = 32MB → clamped to 4MB max
+        assert_eq!(compute_window_for_stream_count(1), INITIAL_STREAM_WINDOW);
+    }
+
+    #[test]
+    fn test_adaptive_window_at_max_boundary() {
+        // 32MB/8 = 4MB = exactly INITIAL_STREAM_WINDOW
+        assert_eq!(compute_window_for_stream_count(8), INITIAL_STREAM_WINDOW);
+    }
+
+    #[test]
+    fn test_adaptive_window_just_below_max() {
+        // 32MB/9 = 3,728,270 — first value below INITIAL_STREAM_WINDOW
+        let w = compute_window_for_stream_count(9);
+        assert!(w < INITIAL_STREAM_WINDOW);
+        assert_eq!(w, (32 * 1024 * 1024u64 / 9) as u32);
+    }
+
+    #[test]
+    fn test_adaptive_window_16_streams() {
+        // 32MB/16 = 2MB
+        assert_eq!(compute_window_for_stream_count(16), 2 * 1024 * 1024);
+    }
+
+    #[test]
+    fn test_adaptive_window_100_streams() {
+        // 32MB/100 = 335,544 bytes (~327KB)
+        let w = compute_window_for_stream_count(100);
+        assert_eq!(w, (32 * 1024 * 1024u64 / 100) as u32);
+        assert!(w > 64 * 1024); // above floor
+        assert!(w < INITIAL_STREAM_WINDOW as u32); // below ceiling
+    }
+
+    #[test]
+    fn test_adaptive_window_200_streams() {
+        // 32MB/200 = 167,772 bytes (~163KB), above 64KB floor
+        let w = compute_window_for_stream_count(200);
+        assert_eq!(w, (32 * 1024 * 1024u64 / 200) as u32);
+        assert!(w > 64 * 1024);
+    }
+
+    #[test]
+    fn test_adaptive_window_500_streams() {
+        // 32MB/500 = 67,108 bytes (~65.5KB), just above 64KB floor
+        let w = compute_window_for_stream_count(500);
+        assert_eq!(w, (32 * 1024 * 1024u64 / 500) as u32);
+        assert!(w > 64 * 1024);
+    }
+
+    #[test]
+    fn test_adaptive_window_at_min_boundary() {
+        // 32MB/512 = 65,536 = exactly 64KB floor
+        assert_eq!(compute_window_for_stream_count(512), 64 * 1024);
+    }
+
+    #[test]
+    fn test_adaptive_window_below_min_clamped() {
+        // 32MB/513 = 65,408 → clamped up to 64KB
+        assert_eq!(compute_window_for_stream_count(513), 64 * 1024);
+    }
+
+    #[test]
+    fn test_adaptive_window_1000_streams() {
+        // 32MB/1000 = 33,554 → clamped to 64KB
+        assert_eq!(compute_window_for_stream_count(1000), 64 * 1024);
+    }
+
+    #[test]
+    fn test_adaptive_window_max_u32() {
+        // Extreme: u32::MAX streams → tiny value → clamped to 64KB
+        assert_eq!(compute_window_for_stream_count(u32::MAX), 64 * 1024);
+    }
+
+    #[test]
+    fn test_adaptive_window_monotonically_decreasing() {
+        // Window should decrease (or stay same) as stream count increases
+        let mut prev = compute_window_for_stream_count(1);
+        for n in [2, 5, 10, 50, 100, 200, 500, 512, 1000] {
+            let w = compute_window_for_stream_count(n);
+            assert!(w <= prev, "window increased from {} to {} at n={}", prev, w, n);
+            prev = w;
+        }
+    }
+
+    #[test]
+    fn test_adaptive_window_total_budget_bounded() {
+        // active × per_stream_window should never exceed 32MB (+ clamp overhead for high N)
+        for n in [1, 10, 50, 100, 200, 500] {
+            let w = compute_window_for_stream_count(n);
+            let total = w as u64 * n as u64;
+            assert!(total <= 32 * 1024 * 1024, "total {}MB exceeds budget at n={}", total / (1024*1024), n);
+        }
+    }
+
+    // --- encode/decode window_update roundtrip ---
+
+    #[test]
+    fn test_window_update_roundtrip() {
+        for &increment in &[0u32, 1, 64 * 1024, INITIAL_STREAM_WINDOW, MAX_WINDOW_SIZE, u32::MAX] {
+            let frame = encode_window_update(42, FRAME_WINDOW_UPDATE, increment);
+            assert_eq!(frame[4], FRAME_WINDOW_UPDATE);
+            let decoded = decode_window_update(&frame[FRAME_HEADER_SIZE..]);
+            assert_eq!(decoded, Some(increment));
+        }
+    }
+
+    #[test]
+    fn test_window_update_back_roundtrip() {
+        let frame = encode_window_update(7, FRAME_WINDOW_UPDATE_BACK, 1234567);
+        assert_eq!(frame[4], FRAME_WINDOW_UPDATE_BACK);
+        assert_eq!(decode_window_update(&frame[FRAME_HEADER_SIZE..]), Some(1234567));
+    }
+
+    #[test]
+    fn test_decode_window_update_malformed() {
+        assert_eq!(decode_window_update(&[]), None);
+        assert_eq!(decode_window_update(&[0, 0, 0]), None);
+        assert_eq!(decode_window_update(&[0, 0, 0, 0, 0]), None);
+    }
 }
--- a/test/test.classes.node.ts
+++ b/test/test.classes.node.ts
@@ -0,0 +1,35 @@
+import { expect, tap } from '@push.rocks/tapbundle';
+import { EventEmitter } from 'events';
+import { RemoteIngressHub, RemoteIngressEdge } from '../ts/index.js';
+
+tap.test('RemoteIngressHub constructor does not throw', async () => {
+  const hub = new RemoteIngressHub();
+  expect(hub).toBeTruthy();
+});
+
+tap.test('RemoteIngressHub is instanceof EventEmitter', async () => {
+  const hub = new RemoteIngressHub();
+  expect(hub).toBeInstanceOf(EventEmitter);
+});
+
+tap.test('RemoteIngressHub.running is false before start', async () => {
+  const hub = new RemoteIngressHub();
+  expect(hub.running).toBeFalse();
+});
+
+tap.test('RemoteIngressEdge constructor does not throw', async () => {
+  const edge = new RemoteIngressEdge();
+  expect(edge).toBeTruthy();
+});
+
+tap.test('RemoteIngressEdge is instanceof EventEmitter', async () => {
+  const edge = new RemoteIngressEdge();
+  expect(edge).toBeInstanceOf(EventEmitter);
+});
+
+tap.test('RemoteIngressEdge.running is false before start', async () => {
+  const edge = new RemoteIngressEdge();
+  expect(edge.running).toBeFalse();
+});
+
+export default tap.start();
--- a/test/test.flowcontrol.node.ts
+++ b/test/test.flowcontrol.node.ts
@@ -0,0 +1,475 @@
+import { expect, tap } from '@push.rocks/tapbundle';
+import * as net from 'net';
+import * as crypto from 'crypto';
+import { RemoteIngressHub, RemoteIngressEdge } from '../ts/index.js';
+
+// ---------------------------------------------------------------------------
+// Helpers
+// ---------------------------------------------------------------------------
+
+/** Find N free ports by binding to port 0 and collecting OS-assigned ports. */
+async function findFreePorts(count: number): Promise<number[]> {
+  const servers: net.Server[] = [];
+  const ports: number[] = [];
+  for (let i = 0; i < count; i++) {
+    const server = net.createServer();
+    await new Promise<void>((resolve) => server.listen(0, '127.0.0.1', resolve));
+    ports.push((server.address() as net.AddressInfo).port);
+    servers.push(server);
+  }
+  await Promise.all(servers.map((s) => new Promise<void>((resolve) => s.close(() => resolve()))));
+  return ports;
+}
+
+type TrackingServer = net.Server & { destroyAll: () => void };
+
+/** Start a TCP echo server that tracks connections for force-close. */
+function startEchoServer(port: number, host: string): Promise<TrackingServer> {
+  return new Promise((resolve, reject) => {
+    const connections = new Set<net.Socket>();
+    const server = net.createServer((socket) => {
+      connections.add(socket);
+      socket.on('close', () => connections.delete(socket));
+
+      // Skip PROXY protocol v1 header line before echoing
+      let proxyHeaderParsed = false;
+      let pendingBuf = Buffer.alloc(0);
+      socket.on('data', (data: Buffer) => {
+        if (!proxyHeaderParsed) {
+          pendingBuf = Buffer.concat([pendingBuf, data]);
+          const idx = pendingBuf.indexOf('\r\n');
+          if (idx !== -1) {
+            proxyHeaderParsed = true;
+            const remainder = pendingBuf.subarray(idx + 2);
+            if (remainder.length > 0) {
+              socket.write(remainder);
+            }
+          }
+          return;
+        }
+        socket.write(data);
+      });
+      socket.on('error', () => {});
+    }) as TrackingServer;
+
+    server.destroyAll = () => {
+      for (const conn of connections) conn.destroy();
+      connections.clear();
+    };
+
+    server.on('error', reject);
+    server.listen(port, host, () => resolve(server));
+  });
+}
+
+/**
+ * Start a server that sends a large response immediately on first data received.
+ * Does NOT wait for end (the tunnel protocol has no half-close).
+ * On receiving first data chunk after PROXY header, sends responseSize bytes then closes.
+ */
+function startLargeResponseServer(port: number, host: string, responseSize: number): Promise<TrackingServer> {
+  return new Promise((resolve, reject) => {
+    const connections = new Set<net.Socket>();
+    const server = net.createServer((socket) => {
+      connections.add(socket);
+      socket.on('close', () => connections.delete(socket));
+
+      let proxyHeaderParsed = false;
+      let pendingBuf = Buffer.alloc(0);
+      let responseSent = false;
+
+      socket.on('data', (data: Buffer) => {
+        if (!proxyHeaderParsed) {
+          pendingBuf = Buffer.concat([pendingBuf, data]);
+          const idx = pendingBuf.indexOf('\r\n');
+          if (idx !== -1) {
+            proxyHeaderParsed = true;
+            const remainder = pendingBuf.subarray(idx + 2);
+            if (remainder.length > 0 && !responseSent) {
+              responseSent = true;
+              sendLargeResponse(socket, responseSize);
+            }
+          }
+          return;
+        }
+        if (!responseSent) {
+          responseSent = true;
+          sendLargeResponse(socket, responseSize);
+        }
+      });
+      socket.on('error', () => {});
+    }) as TrackingServer;
+
+    server.destroyAll = () => {
+      for (const conn of connections) conn.destroy();
+      connections.clear();
+    };
+
+    server.on('error', reject);
+    server.listen(port, host, () => resolve(server));
+  });
+}
+
+function sendLargeResponse(socket: net.Socket, totalBytes: number) {
+  const chunkSize = 32 * 1024;
+  let sent = 0;
+  const writeChunk = () => {
+    while (sent < totalBytes) {
+      const toWrite = Math.min(chunkSize, totalBytes - sent);
+      // Use a deterministic pattern for verification
+      const chunk = Buffer.alloc(toWrite, (sent % 256) & 0xff);
+      const canContinue = socket.write(chunk);
+      sent += toWrite;
+      if (!canContinue) {
+        socket.once('drain', writeChunk);
+        return;
+      }
+    }
+    socket.end();
+  };
+  writeChunk();
+}
+
+/** Force-close a server: destroy all connections, then close. */
+async function forceCloseServer(server: TrackingServer): Promise<void> {
+  server.destroyAll();
+  await new Promise<void>((resolve) => server.close(() => resolve()));
+}
+
+interface TestTunnel {
+  hub: RemoteIngressHub;
+  edge: RemoteIngressEdge;
+  edgePort: number;
+  cleanup: () => Promise<void>;
+}
+
+/**
+ * Start a full hub + edge tunnel.
+ * Edge binds to 127.0.0.1, upstream server binds to 127.0.0.2.
+ * Hub targetHost = 127.0.0.2 so hub -> upstream doesn't loop back to edge.
+ */
+async function startTunnel(edgePort: number, hubPort: number): Promise<TestTunnel> {
+  const hub = new RemoteIngressHub();
+  const edge = new RemoteIngressEdge();
+
+  await hub.start({
+    tunnelPort: hubPort,
+    targetHost: '127.0.0.2',
+  });
+
+  await hub.updateAllowedEdges([
+    { id: 'test-edge', secret: 'test-secret', listenPorts: [edgePort] },
+  ]);
+
+  const connectedPromise = new Promise<void>((resolve, reject) => {
+    const timeout = setTimeout(() => reject(new Error('Edge did not connect within 10s')), 10000);
+    edge.once('tunnelConnected', () => {
+      clearTimeout(timeout);
+      resolve();
+    });
+  });
+
+  await edge.start({
+    hubHost: '127.0.0.1',
+    hubPort,
+    edgeId: 'test-edge',
+    secret: 'test-secret',
+    bindAddress: '127.0.0.1',
+  });
+
+  await connectedPromise;
+  await new Promise((resolve) => setTimeout(resolve, 500));
+
+  return {
+    hub,
+    edge,
+    edgePort,
+    cleanup: async () => {
+      await edge.stop();
+      await hub.stop();
+    },
+  };
+}
+
+/**
+ * Send data through the tunnel and collect the echoed response.
+ */
+function sendAndReceive(port: number, data: Buffer, timeoutMs = 30000): Promise<Buffer> {
+  return new Promise((resolve, reject) => {
+    const chunks: Buffer[] = [];
+    let totalReceived = 0;
+    const expectedLength = data.length;
+    let settled = false;
+
+    const client = net.createConnection({ host: '127.0.0.1', port }, () => {
+      client.write(data);
+      client.end();
+    });
+
+    const timer = setTimeout(() => {
+      if (!settled) {
+        settled = true;
+        client.destroy();
+        reject(new Error(`Timeout after ${timeoutMs}ms — received ${totalReceived}/${expectedLength} bytes`));
+      }
+    }, timeoutMs);
+
+    client.on('data', (chunk: Buffer) => {
+      chunks.push(chunk);
+      totalReceived += chunk.length;
+      if (totalReceived >= expectedLength && !settled) {
+        settled = true;
+        clearTimeout(timer);
+        client.destroy();
+        resolve(Buffer.concat(chunks));
+      }
+    });
+
+    client.on('end', () => {
+      if (!settled) {
+        settled = true;
+        clearTimeout(timer);
+        resolve(Buffer.concat(chunks));
+      }
+    });
+
+    client.on('error', (err) => {
+      if (!settled) {
+        settled = true;
+        clearTimeout(timer);
+        reject(err);
+      }
+    });
+  });
+}
+
+/**
+ * Connect to the tunnel, send a small request, and collect a large response.
+ * Does NOT call end() — the tunnel has no half-close.
+ * Instead, collects until expectedResponseSize bytes arrive.
+ */
+function sendAndReceiveLarge(
+  port: number,
+  data: Buffer,
+  expectedResponseSize: number,
+  timeoutMs = 60000,
+): Promise<Buffer> {
+  return new Promise((resolve, reject) => {
+    const chunks: Buffer[] = [];
+    let totalReceived = 0;
+    let settled = false;
+
+    const client = net.createConnection({ host: '127.0.0.1', port }, () => {
+      client.write(data);
+      // Do NOT call client.end() — the server will respond immediately
+      // and the tunnel CLOSE will happen when the download finishes
+    });
+
+    const timer = setTimeout(() => {
+      if (!settled) {
+        settled = true;
+        client.destroy();
+        reject(new Error(`Timeout after ${timeoutMs}ms — received ${totalReceived}/${expectedResponseSize} bytes`));
+      }
+    }, timeoutMs);
+
+    client.on('data', (chunk: Buffer) => {
+      chunks.push(chunk);
+      totalReceived += chunk.length;
+      if (totalReceived >= expectedResponseSize && !settled) {
+        settled = true;
+        clearTimeout(timer);
+        client.destroy();
+        resolve(Buffer.concat(chunks));
+      }
+    });
+
+    client.on('end', () => {
+      if (!settled) {
+        settled = true;
+        clearTimeout(timer);
+        resolve(Buffer.concat(chunks));
+      }
+    });
+
+    client.on('error', (err) => {
+      if (!settled) {
+        settled = true;
+        clearTimeout(timer);
+        reject(err);
+      }
+    });
+  });
+}
+
+function sha256(buf: Buffer): string {
+  return crypto.createHash('sha256').update(buf).digest('hex');
+}
+
+// ---------------------------------------------------------------------------
+// Tests
+// ---------------------------------------------------------------------------
+
+let tunnel: TestTunnel;
+let echoServer: TrackingServer;
+let hubPort: number;
+let edgePort: number;
+
+tap.test('setup: start echo server and tunnel', async () => {
+  [hubPort, edgePort] = await findFreePorts(2);
+
+  echoServer = await startEchoServer(edgePort, '127.0.0.2');
+  tunnel = await startTunnel(edgePort, hubPort);
+
+  expect(tunnel.hub.running).toBeTrue();
+});
+
+tap.test('single stream: 32MB transfer exceeding initial 4MB window', async () => {
+  const size = 32 * 1024 * 1024;
+  const data = crypto.randomBytes(size);
+  const expectedHash = sha256(data);
+
+  const received = await sendAndReceive(edgePort, data, 60000);
+
+  expect(received.length).toEqual(size);
+  expect(sha256(received)).toEqual(expectedHash);
+});
+
+tap.test('200 concurrent streams with 64KB each', async () => {
+  const streamCount = 200;
+  const payloadSize = 64 * 1024;
+
+  const promises = Array.from({ length: streamCount }, () => {
+    const data = crypto.randomBytes(payloadSize);
+    const hash = sha256(data);
+    return sendAndReceive(edgePort, data, 30000).then((received) => ({
+      sent: hash,
+      received: sha256(received),
+      sizeOk: received.length === payloadSize,
+    }));
+  });
+
+  const results = await Promise.all(promises);
+  const failures = results.filter((r) => !r.sizeOk || r.sent !== r.received);
+
+  expect(failures.length).toEqual(0);
+});
+
+tap.test('512 concurrent streams at minimum window boundary (16KB each)', async () => {
+  const streamCount = 512;
+  const payloadSize = 16 * 1024;
+
+  const promises = Array.from({ length: streamCount }, () => {
+    const data = crypto.randomBytes(payloadSize);
+    const hash = sha256(data);
+    return sendAndReceive(edgePort, data, 60000).then((received) => ({
+      sent: hash,
+      received: sha256(received),
+      sizeOk: received.length === payloadSize,
+    }));
+  });
+
+  const results = await Promise.all(promises);
+  const failures = results.filter((r) => !r.sizeOk || r.sent !== r.received);
+
+  expect(failures.length).toEqual(0);
+});
+
+tap.test('asymmetric transfer: 4KB request -> 4MB response', async () => {
+  // Swap to large-response server
+  await forceCloseServer(echoServer);
+  const responseSize = 4 * 1024 * 1024; // 4 MB
+  const largeServer = await startLargeResponseServer(edgePort, '127.0.0.2', responseSize);
+
+  try {
+    const requestData = crypto.randomBytes(4 * 1024); // 4 KB
+    const received = await sendAndReceiveLarge(edgePort, requestData, responseSize, 60000);
+    expect(received.length).toEqual(responseSize);
+  } finally {
+    // Always restore echo server even on failure
+    await forceCloseServer(largeServer);
+    echoServer = await startEchoServer(edgePort, '127.0.0.2');
+  }
+});
+
+tap.test('100 streams x 1MB each (100MB total exceeding 32MB budget)', async () => {
+  const streamCount = 100;
+  const payloadSize = 1 * 1024 * 1024;
+
+  const promises = Array.from({ length: streamCount }, () => {
+    const data = crypto.randomBytes(payloadSize);
+    const hash = sha256(data);
+    return sendAndReceive(edgePort, data, 120000).then((received) => ({
+      sent: hash,
+      received: sha256(received),
+      sizeOk: received.length === payloadSize,
+    }));
+  });
+
+  const results = await Promise.all(promises);
+  const failures = results.filter((r) => !r.sizeOk || r.sent !== r.received);
+
+  expect(failures.length).toEqual(0);
+});
+
+tap.test('active stream counter tracks concurrent connections', async () => {
+  const N = 50;
+
+  // Open N connections and keep them alive (send data but don't close)
+  const sockets: net.Socket[] = [];
+  const connectPromises = Array.from({ length: N }, () => {
+    return new Promise<net.Socket>((resolve, reject) => {
+      const sock = net.createConnection({ host: '127.0.0.1', port: edgePort }, () => {
+        resolve(sock);
+      });
+      sock.on('error', () => {});
+      setTimeout(() => reject(new Error('connect timeout')), 5000);
+    });
+  });
+
+  const connected = await Promise.all(connectPromises);
+  sockets.push(...connected);
+
+  // Brief delay for stream registration to propagate
+  await new Promise((resolve) => setTimeout(resolve, 500));
+
+  // Verify the edge reports >= N active streams.
+  // This counter is the input to compute_window_for_stream_count(),
+  // so its accuracy determines whether adaptive window sizing is correct.
+  const status = await tunnel.edge.getStatus();
+  expect(status.activeStreams).toBeGreaterThanOrEqual(N);
+
+  // Clean up: destroy all sockets (the tunnel's 300s stream timeout will handle cleanup)
+  for (const sock of sockets) {
+    sock.destroy();
+  }
+});
+
+tap.test('50 streams x 2MB each (forces multiple window refills per stream)', async () => {
+  // At 50 concurrent streams: adaptive window = 32MB/50 = 655KB per stream
+  // Each stream sends 2MB → needs ~3 WINDOW_UPDATE refill cycles per stream
+  const streamCount = 50;
+  const payloadSize = 2 * 1024 * 1024;
+
+  const promises = Array.from({ length: streamCount }, () => {
+    const data = crypto.randomBytes(payloadSize);
+    const hash = sha256(data);
+    return sendAndReceive(edgePort, data, 120000).then((received) => ({
+      sent: hash,
+      received: sha256(received),
+      sizeOk: received.length === payloadSize,
+    }));
+  });
+
+  const results = await Promise.all(promises);
+  const failures = results.filter((r) => !r.sizeOk || r.sent !== r.received);
+
+  expect(failures.length).toEqual(0);
+});
+
+tap.test('teardown: stop tunnel and echo server', async () => {
+  await tunnel.cleanup();
+  await forceCloseServer(echoServer);
+});
+
+export default tap.start();
--- a/test/test.token.node.ts
+++ b/test/test.token.node.ts
@@ -0,0 +1,152 @@
+import { expect, tap } from '@push.rocks/tapbundle';
+import { encodeConnectionToken, decodeConnectionToken, type IConnectionTokenData } from '../ts/classes.token.js';
+
+tap.test('token roundtrip with unicode chars in secret', async () => {
+  const data: IConnectionTokenData = {
+    hubHost: 'hub.example.com',
+    hubPort: 8443,
+    edgeId: 'edge-1',
+    secret: 'sécret-with-ünïcödé-日本語',
+  };
+  const token = encodeConnectionToken(data);
+  const decoded = decodeConnectionToken(token);
+  expect(decoded.secret).toEqual(data.secret);
+});
+
+tap.test('token roundtrip with empty edgeId', async () => {
+  const data: IConnectionTokenData = {
+    hubHost: 'hub.test',
+    hubPort: 443,
+    edgeId: '',
+    secret: 'key',
+  };
+  const token = encodeConnectionToken(data);
+  const decoded = decodeConnectionToken(token);
+  expect(decoded.edgeId).toEqual('');
+});
+
+tap.test('token roundtrip with port 0', async () => {
+  const data: IConnectionTokenData = {
+    hubHost: 'h',
+    hubPort: 0,
+    edgeId: 'e',
+    secret: 's',
+  };
+  const token = encodeConnectionToken(data);
+  const decoded = decodeConnectionToken(token);
+  expect(decoded.hubPort).toEqual(0);
+});
+
+tap.test('token roundtrip with port 65535', async () => {
+  const data: IConnectionTokenData = {
+    hubHost: 'h',
+    hubPort: 65535,
+    edgeId: 'e',
+    secret: 's',
+  };
+  const token = encodeConnectionToken(data);
+  const decoded = decodeConnectionToken(token);
+  expect(decoded.hubPort).toEqual(65535);
+});
+
+tap.test('token roundtrip with very long secret (10k chars)', async () => {
+  const longSecret = 'x'.repeat(10000);
+  const data: IConnectionTokenData = {
+    hubHost: 'host',
+    hubPort: 1234,
+    edgeId: 'edge',
+    secret: longSecret,
+  };
+  const token = encodeConnectionToken(data);
+  const decoded = decodeConnectionToken(token);
+  expect(decoded.secret).toEqual(longSecret);
+  expect(decoded.secret.length).toEqual(10000);
+});
+
+tap.test('token string is URL-safe', async () => {
+  const data: IConnectionTokenData = {
+    hubHost: 'hub.example.com',
+    hubPort: 8443,
+    edgeId: 'edge-001',
+    secret: 'super+secret/key==with+special/chars',
+  };
+  const token = encodeConnectionToken(data);
+  expect(token).toMatch(/^[A-Za-z0-9_-]+$/);
+});
+
+tap.test('decode empty string throws', async () => {
+  let error: Error | undefined;
+  try {
+    decodeConnectionToken('');
+  } catch (e) {
+    error = e as Error;
+  }
+  expect(error).toBeInstanceOf(Error);
+});
+
+tap.test('decode valid base64 but wrong JSON shape throws missing required fields', async () => {
+  // Encode { "a": 1, "b": 2 } — valid JSON but wrong shape
+  const token = Buffer.from(JSON.stringify({ a: 1, b: 2 }), 'utf-8')
+    .toString('base64')
+    .replace(/\+/g, '-')
+    .replace(/\//g, '_')
+    .replace(/=+$/, '');
+
+  let error: Error | undefined;
+  try {
+    decodeConnectionToken(token);
+  } catch (e) {
+    error = e as Error;
+  }
+  expect(error).toBeInstanceOf(Error);
+  expect(error!.message).toInclude('missing required fields');
+});
+
+tap.test('decode valid JSON but wrong field types throws missing required fields', async () => {
+  // h is number instead of string, p is string instead of number
+  const token = Buffer.from(JSON.stringify({ h: 123, p: 'notnum', e: 'e', s: 's' }), 'utf-8')
+    .toString('base64')
+    .replace(/\+/g, '-')
+    .replace(/\//g, '_')
+    .replace(/=+$/, '');
+
+  let error: Error | undefined;
+  try {
+    decodeConnectionToken(token);
+  } catch (e) {
+    error = e as Error;
+  }
+  expect(error).toBeInstanceOf(Error);
+  expect(error!.message).toInclude('missing required fields');
+});
+
+tap.test('decode with extra fields succeeds', async () => {
+  const token = Buffer.from(
+    JSON.stringify({ h: 'host', p: 443, e: 'edge', s: 'secret', extra: 'ignored' }),
+    'utf-8',
+  )
+    .toString('base64')
+    .replace(/\+/g, '-')
+    .replace(/\//g, '_')
+    .replace(/=+$/, '');
+
+  const decoded = decodeConnectionToken(token);
+  expect(decoded.hubHost).toEqual('host');
+  expect(decoded.hubPort).toEqual(443);
+  expect(decoded.edgeId).toEqual('edge');
+  expect(decoded.secret).toEqual('secret');
+});
+
+tap.test('encode is deterministic', async () => {
+  const data: IConnectionTokenData = {
+    hubHost: 'hub.test',
+    hubPort: 8443,
+    edgeId: 'edge-1',
+    secret: 'deterministic-key',
+  };
+  const token1 = encodeConnectionToken(data);
+  const token2 = encodeConnectionToken(data);
+  expect(token1).toEqual(token2);
+});
+
+export default tap.start();
--- a/test/test.ts
+++ b/test/test.ts
@@ -9,4 +9,53 @@ tap.test('should export RemoteIngressEdge', async () => {
  expect(remoteingress.RemoteIngressEdge).toBeTypeOf('function');
 });

+tap.test('should export encodeConnectionToken and decodeConnectionToken', async () => {
+  expect(remoteingress.encodeConnectionToken).toBeTypeOf('function');
+  expect(remoteingress.decodeConnectionToken).toBeTypeOf('function');
+});
+
+tap.test('should roundtrip encode → decode a connection token', async () => {
+  const data: remoteingress.IConnectionTokenData = {
+    hubHost: 'hub.example.com',
+    hubPort: 8443,
+    edgeId: 'edge-001',
+    secret: 'super-secret-key',
+  };
+  const token = remoteingress.encodeConnectionToken(data);
+  const decoded = remoteingress.decodeConnectionToken(token);
+  expect(decoded.hubHost).toEqual(data.hubHost);
+  expect(decoded.hubPort).toEqual(data.hubPort);
+  expect(decoded.edgeId).toEqual(data.edgeId);
+  expect(decoded.secret).toEqual(data.secret);
+});
+
+tap.test('should throw on malformed token', async () => {
+  let error: Error | undefined;
+  try {
+    remoteingress.decodeConnectionToken('not-valid-json!!!');
+  } catch (e) {
+    error = e as Error;
+  }
+  expect(error).toBeInstanceOf(Error);
+  expect(error!.message).toInclude('Invalid connection token');
+});
+
+tap.test('should throw on token with missing fields', async () => {
+  // Encode a partial object (missing 'p' and 's')
+  const partial = Buffer.from(JSON.stringify({ h: 'host', e: 'edge' }), 'utf-8')
+    .toString('base64')
+    .replace(/\+/g, '-')
+    .replace(/\//g, '_')
+    .replace(/=+$/, '');
+
+  let error: Error | undefined;
+  try {
+    remoteingress.decodeConnectionToken(partial);
+  } catch (e) {
+    error = e as Error;
+  }
+  expect(error).toBeInstanceOf(Error);
+  expect(error!.message).toInclude('missing required fields');
+});
+
 export default tap.start();
--- a/ts/00_commitinfo_data.ts
+++ b/ts/00_commitinfo_data.ts
@@ -3,6 +3,6 @@
 */
 export const commitinfo = {
  name: '@serve.zone/remoteingress',
-  version: '3.0.4',
+  version: '4.8.4',
  description: 'Edge ingress tunnel for DcRouter - accepts incoming TCP connections at network edge and tunnels them to DcRouter SmartProxy preserving client IP via PROXY protocol v1.'
 }
--- a/ts/classes.remoteingressedge.ts
+++ b/ts/classes.remoteingressedge.ts
@@ -1,5 +1,6 @@
 import * as plugins from './plugins.js';
 import { EventEmitter } from 'events';
+import { decodeConnectionToken } from './classes.token.js';

 // Command map for the edge side of remoteingress-bin
 type TEdgeCommands = {
@@ -13,8 +14,7 @@ type TEdgeCommands = {
      hubPort: number;
      edgeId: string;
      secret: string;
-      listenPorts: number[];
-      stunIntervalSecs?: number;
+      bindAddress?: string;
    };
    result: { started: boolean };
  };
@@ -39,13 +39,20 @@ export interface IEdgeConfig {
  hubPort?: number;
  edgeId: string;
  secret: string;
-  listenPorts: number[];
-  stunIntervalSecs?: number;
+  bindAddress?: string;
 }

+const MAX_RESTART_ATTEMPTS = 10;
+const MAX_RESTART_BACKOFF_MS = 30_000;
+
 export class RemoteIngressEdge extends EventEmitter {
  private bridge: InstanceType<typeof plugins.smartrust.RustBridge<TEdgeCommands>>;
  private started = false;
+  private stopping = false;
+  private savedConfig: IEdgeConfig | null = null;
+  private restartBackoffMs = 1000;
+  private restartAttempts = 0;
+  private statusInterval: ReturnType<typeof setInterval> | undefined;

  constructor() {
    super();
@@ -76,45 +83,97 @@ export class RemoteIngressEdge extends EventEmitter {
    this.bridge.on('management:tunnelConnected', () => {
      this.emit('tunnelConnected');
    });
-    this.bridge.on('management:tunnelDisconnected', () => {
-      this.emit('tunnelDisconnected');
+    this.bridge.on('management:tunnelDisconnected', (data: { reason?: string }) => {
+      const reason = data?.reason ?? 'unknown';
+      console.log(`[RemoteIngressEdge] Tunnel disconnected: ${reason}`);
+      this.emit('tunnelDisconnected', data);
    });
    this.bridge.on('management:publicIpDiscovered', (data: { ip: string }) => {
      this.emit('publicIpDiscovered', data);
    });
+    this.bridge.on('management:portsAssigned', (data: { listenPorts: number[] }) => {
+      console.log(`[RemoteIngressEdge] Ports assigned by hub: ${data.listenPorts.join(', ')}`);
+      this.emit('portsAssigned', data);
+    });
+    this.bridge.on('management:portsUpdated', (data: { listenPorts: number[] }) => {
+      console.log(`[RemoteIngressEdge] Ports updated by hub: ${data.listenPorts.join(', ')}`);
+      this.emit('portsUpdated', data);
+    });
  }

  /**
   * Start the edge — spawns the Rust binary and connects to the hub.
+   * Accepts either a connection token or an explicit IEdgeConfig.
   */
-  public async start(config: IEdgeConfig): Promise<void> {
+  public async start(config: { token: string } | IEdgeConfig): Promise<void> {
+    let edgeConfig: IEdgeConfig;
+
+    if ('token' in config) {
+      const decoded = decodeConnectionToken(config.token);
+      edgeConfig = {
+        hubHost: decoded.hubHost,
+        hubPort: decoded.hubPort,
+        edgeId: decoded.edgeId,
+        secret: decoded.secret,
+      };
+    } else {
+      edgeConfig = config;
+    }
+
+    this.savedConfig = edgeConfig;
+    this.stopping = false;
+
    const spawned = await this.bridge.spawn();
    if (!spawned) {
      throw new Error('Failed to spawn remoteingress-bin');
    }

+    // Register crash recovery handler
+    this.bridge.on('exit', this.handleCrashRecovery);
+
    await this.bridge.sendCommand('startEdge', {
-      hubHost: config.hubHost,
-      hubPort: config.hubPort ?? 8443,
-      edgeId: config.edgeId,
-      secret: config.secret,
-      listenPorts: config.listenPorts,
-      stunIntervalSecs: config.stunIntervalSecs,
+      hubHost: edgeConfig.hubHost,
+      hubPort: edgeConfig.hubPort ?? 8443,
+      edgeId: edgeConfig.edgeId,
+      secret: edgeConfig.secret,
+      ...(edgeConfig.bindAddress ? { bindAddress: edgeConfig.bindAddress } : {}),
    });

    this.started = true;
+    this.restartAttempts = 0;
+    this.restartBackoffMs = 1000;
+
+    // Start periodic status logging
+    this.statusInterval = setInterval(async () => {
+      try {
+        const status = await this.getStatus();
+        console.log(
+          `[RemoteIngressEdge] Status: connected=${status.connected}, ` +
+          `streams=${status.activeStreams}, ports=[${status.listenPorts.join(',')}], ` +
+          `publicIp=${status.publicIp ?? 'unknown'}`
+        );
+      } catch {
+        // Bridge may be shutting down
+      }
+    }, 60_000);
  }

  /**
   * Stop the edge and kill the Rust process.
   */
  public async stop(): Promise<void> {
+    this.stopping = true;
+    if (this.statusInterval) {
+      clearInterval(this.statusInterval);
+      this.statusInterval = undefined;
+    }
    if (this.started) {
      try {
        await this.bridge.sendCommand('stopEdge', {} as Record<string, never>);
      } catch {
        // Process may already be dead
      }
+      this.bridge.removeListener('exit', this.handleCrashRecovery);
      this.bridge.kill();
      this.started = false;
    }
@@ -133,4 +192,56 @@ export class RemoteIngressEdge extends EventEmitter {
  public get running(): boolean {
    return this.bridge.running;
  }
+
+  /**
+   * Handle unexpected Rust binary crash — auto-restart with backoff.
+   */
+  private handleCrashRecovery = async (code: number | null, signal: string | null) => {
+    if (this.stopping || !this.started || !this.savedConfig) {
+      return;
+    }
+
+    console.error(
+      `[RemoteIngressEdge] Rust binary crashed (code=${code}, signal=${signal}), ` +
+      `attempt ${this.restartAttempts + 1}/${MAX_RESTART_ATTEMPTS}`
+    );
+
+    this.started = false;
+
+    if (this.restartAttempts >= MAX_RESTART_ATTEMPTS) {
+      console.error('[RemoteIngressEdge] Max restart attempts reached, giving up');
+      this.emit('crashRecoveryFailed');
+      return;
+    }
+
+    await new Promise(resolve => setTimeout(resolve, this.restartBackoffMs));
+    this.restartBackoffMs = Math.min(this.restartBackoffMs * 2, MAX_RESTART_BACKOFF_MS);
+    this.restartAttempts++;
+
+    try {
+      const spawned = await this.bridge.spawn();
+      if (!spawned) {
+        console.error('[RemoteIngressEdge] Failed to respawn binary');
+        return;
+      }
+
+      this.bridge.on('exit', this.handleCrashRecovery);
+
+      await this.bridge.sendCommand('startEdge', {
+        hubHost: this.savedConfig.hubHost,
+        hubPort: this.savedConfig.hubPort ?? 8443,
+        edgeId: this.savedConfig.edgeId,
+        secret: this.savedConfig.secret,
+        ...(this.savedConfig.bindAddress ? { bindAddress: this.savedConfig.bindAddress } : {}),
+      });
+
+      this.started = true;
+      this.restartAttempts = 0;
+      this.restartBackoffMs = 1000;
+      console.log('[RemoteIngressEdge] Successfully recovered from crash');
+      this.emit('crashRecovered');
+    } catch (err) {
+      console.error(`[RemoteIngressEdge] Crash recovery failed: ${err}`);
+    }
+  };
 }
--- a/ts/classes.remoteingresshub.ts
+++ b/ts/classes.remoteingresshub.ts
@@ -11,6 +11,8 @@ type THubCommands = {
    params: {
      tunnelPort: number;
      targetHost?: string;
+      tlsCertPem?: string;
+      tlsKeyPem?: string;
    };
    result: { started: boolean };
  };
@@ -20,7 +22,7 @@ type THubCommands = {
  };
  updateAllowedEdges: {
    params: {
-      edges: Array<{ id: string; secret: string }>;
+      edges: Array<{ id: string; secret: string; listenPorts?: number[]; stunIntervalSecs?: number }>;
    };
    result: { updated: boolean };
  };
@@ -33,6 +35,7 @@ type THubCommands = {
        edgeId: string;
        connectedAt: number;
        activeStreams: number;
+        peerAddr: string;
      }>;
    };
  };
@@ -41,11 +44,25 @@ type THubCommands = {
 export interface IHubConfig {
  tunnelPort?: number;
  targetHost?: string;
+  tls?: {
+    certPem?: string;
+    keyPem?: string;
+  };
 }

+type TAllowedEdge = { id: string; secret: string; listenPorts?: number[]; stunIntervalSecs?: number };
+
+const MAX_RESTART_ATTEMPTS = 10;
+const MAX_RESTART_BACKOFF_MS = 30_000;
+
 export class RemoteIngressHub extends EventEmitter {
  private bridge: InstanceType<typeof plugins.smartrust.RustBridge<THubCommands>>;
  private started = false;
+  private stopping = false;
+  private savedConfig: IHubConfig | null = null;
+  private savedEdges: TAllowedEdge[] = [];
+  private restartBackoffMs = 1000;
+  private restartAttempts = 0;

  constructor() {
    super();
@@ -73,10 +90,12 @@ export class RemoteIngressHub extends EventEmitter {
    });

    // Forward events from Rust binary
-    this.bridge.on('management:edgeConnected', (data: { edgeId: string }) => {
+    this.bridge.on('management:edgeConnected', (data: { edgeId: string; peerAddr: string }) => {
      this.emit('edgeConnected', data);
    });
-    this.bridge.on('management:edgeDisconnected', (data: { edgeId: string }) => {
+    this.bridge.on('management:edgeDisconnected', (data: { edgeId: string; reason?: string }) => {
+      const reason = data?.reason ?? 'unknown';
+      console.log(`[RemoteIngressHub] Edge ${data.edgeId} disconnected: ${reason}`);
      this.emit('edgeDisconnected', data);
    });
    this.bridge.on('management:streamOpened', (data: { edgeId: string; streamId: number }) => {
@@ -91,29 +110,42 @@ export class RemoteIngressHub extends EventEmitter {
   * Start the hub — spawns the Rust binary and starts the tunnel server.
   */
  public async start(config: IHubConfig = {}): Promise<void> {
+    this.savedConfig = config;
+    this.stopping = false;
+
    const spawned = await this.bridge.spawn();
    if (!spawned) {
      throw new Error('Failed to spawn remoteingress-bin');
    }

+    // Register crash recovery handler
+    this.bridge.on('exit', this.handleCrashRecovery);
+
    await this.bridge.sendCommand('startHub', {
      tunnelPort: config.tunnelPort ?? 8443,
      targetHost: config.targetHost ?? '127.0.0.1',
+      ...(config.tls?.certPem && config.tls?.keyPem
+        ? { tlsCertPem: config.tls.certPem, tlsKeyPem: config.tls.keyPem }
+        : {}),
    });

    this.started = true;
+    this.restartAttempts = 0;
+    this.restartBackoffMs = 1000;
  }

  /**
   * Stop the hub and kill the Rust process.
   */
  public async stop(): Promise<void> {
+    this.stopping = true;
    if (this.started) {
      try {
        await this.bridge.sendCommand('stopHub', {} as Record<string, never>);
      } catch {
        // Process may already be dead
      }
+      this.bridge.removeListener('exit', this.handleCrashRecovery);
      this.bridge.kill();
      this.started = false;
    }
@@ -122,7 +154,8 @@ export class RemoteIngressHub extends EventEmitter {
  /**
   * Update the list of allowed edges that can connect to this hub.
   */
-  public async updateAllowedEdges(edges: Array<{ id: string; secret: string }>): Promise<void> {
+  public async updateAllowedEdges(edges: TAllowedEdge[]): Promise<void> {
+    this.savedEdges = edges;
    await this.bridge.sendCommand('updateAllowedEdges', { edges });
  }

@@ -139,4 +172,62 @@ export class RemoteIngressHub extends EventEmitter {
  public get running(): boolean {
    return this.bridge.running;
  }
+
+  /**
+   * Handle unexpected Rust binary crash — auto-restart with backoff.
+   */
+  private handleCrashRecovery = async (code: number | null, signal: string | null) => {
+    if (this.stopping || !this.started || !this.savedConfig) {
+      return;
+    }
+
+    console.error(
+      `[RemoteIngressHub] Rust binary crashed (code=${code}, signal=${signal}), ` +
+      `attempt ${this.restartAttempts + 1}/${MAX_RESTART_ATTEMPTS}`
+    );
+
+    this.started = false;
+
+    if (this.restartAttempts >= MAX_RESTART_ATTEMPTS) {
+      console.error('[RemoteIngressHub] Max restart attempts reached, giving up');
+      this.emit('crashRecoveryFailed');
+      return;
+    }
+
+    await new Promise(resolve => setTimeout(resolve, this.restartBackoffMs));
+    this.restartBackoffMs = Math.min(this.restartBackoffMs * 2, MAX_RESTART_BACKOFF_MS);
+    this.restartAttempts++;
+
+    try {
+      const spawned = await this.bridge.spawn();
+      if (!spawned) {
+        console.error('[RemoteIngressHub] Failed to respawn binary');
+        return;
+      }
+
+      this.bridge.on('exit', this.handleCrashRecovery);
+
+      const config = this.savedConfig;
+      await this.bridge.sendCommand('startHub', {
+        tunnelPort: config.tunnelPort ?? 8443,
+        targetHost: config.targetHost ?? '127.0.0.1',
+        ...(config.tls?.certPem && config.tls?.keyPem
+          ? { tlsCertPem: config.tls.certPem, tlsKeyPem: config.tls.keyPem }
+          : {}),
+      });
+
+      // Restore allowed edges
+      if (this.savedEdges.length > 0) {
+        await this.bridge.sendCommand('updateAllowedEdges', { edges: this.savedEdges });
+      }
+
+      this.started = true;
+      this.restartAttempts = 0;
+      this.restartBackoffMs = 1000;
+      console.log('[RemoteIngressHub] Successfully recovered from crash');
+      this.emit('crashRecovered');
+    } catch (err) {
+      console.error(`[RemoteIngressHub] Crash recovery failed: ${err}`);
+    }
+  };
 }
--- a/ts/classes.token.ts
+++ b/ts/classes.token.ts
@@ -0,0 +1,66 @@
+/**
+ * Connection token utilities for RemoteIngress edge connections.
+ * A token is a base64url-encoded compact JSON object carrying hub connection details.
+ */
+
+export interface IConnectionTokenData {
+  hubHost: string;
+  hubPort: number;
+  edgeId: string;
+  secret: string;
+}
+
+/**
+ * Encode connection data into a single opaque token string (base64url).
+ */
+export function encodeConnectionToken(data: IConnectionTokenData): string {
+  const compact = JSON.stringify({
+    h: data.hubHost,
+    p: data.hubPort,
+    e: data.edgeId,
+    s: data.secret,
+  });
+  // base64url: standard base64 with + → -, / → _, trailing = stripped
+  return Buffer.from(compact, 'utf-8')
+    .toString('base64')
+    .replace(/\+/g, '-')
+    .replace(/\//g, '_')
+    .replace(/=+$/, '');
+}
+
+/**
+ * Decode a connection token back into its constituent fields.
+ * Throws on malformed or incomplete tokens.
+ */
+export function decodeConnectionToken(token: string): IConnectionTokenData {
+  let parsed: { h?: unknown; p?: unknown; e?: unknown; s?: unknown };
+  try {
+    // Restore standard base64 from base64url
+    let base64 = token.replace(/-/g, '+').replace(/_/g, '/');
+    // Re-add padding
+    const remainder = base64.length % 4;
+    if (remainder === 2) base64 += '==';
+    else if (remainder === 3) base64 += '=';
+
+    const json = Buffer.from(base64, 'base64').toString('utf-8');
+    parsed = JSON.parse(json);
+  } catch {
+    throw new Error('Invalid connection token');
+  }
+
+  if (
+    typeof parsed.h !== 'string' ||
+    typeof parsed.p !== 'number' ||
+    typeof parsed.e !== 'string' ||
+    typeof parsed.s !== 'string'
+  ) {
+    throw new Error('Invalid connection token: missing required fields');
+  }
+
+  return {
+    hubHost: parsed.h,
+    hubPort: parsed.p,
+    edgeId: parsed.e,
+    secret: parsed.s,
+  };
+}
--- a/ts/index.ts
+++ b/ts/index.ts
@@ -1,2 +1,3 @@
 export * from './classes.remoteingresshub.js';
 export * from './classes.remoteingressedge.js';
+export * from './classes.token.js';
Author	SHA1	Message	Date
Juergen Kunz	0b5d72de28	v4.8.4	2026-03-17 11:47:33 +00:00
Juergen Kunz	e8431c0174	fix(remoteingress-core): prevent stream stalls by guaranteeing flow-control updates and avoiding bounded per-stream channel overflows	2026-03-17 11:47:33 +00:00
Juergen Kunz	d57d6395dd	v4.8.3	2026-03-17 11:15:18 +00:00
Juergen Kunz	2e5ceeaf5c	fix(protocol,edge): optimize tunnel frame handling and zero-copy uploads in edge I/O	2026-03-17 11:15:18 +00:00
Juergen Kunz	1979910f6f	v4.8.2	2026-03-17 10:33:21 +00:00
Juergen Kunz	edfad2dffe	fix(rust-edge): refactor tunnel I/O to preserve TLS state and prioritize control frames	2026-03-17 10:33:21 +00:00
Juergen Kunz	d907943ae5	v4.8.1	2026-03-17 01:48:06 +00:00
Juergen Kunz	4bfb1244fc	fix(remoteingress-core): remove tunnel writer timeouts from edge and hub buffered writes	2026-03-17 01:48:06 +00:00
Juergen Kunz	e31c3421a6	v4.8.0	2026-03-17 00:58:08 +00:00
Juergen Kunz	de8422966a	feat(events): include disconnect reasons in edge and hub management events	2026-03-17 00:58:08 +00:00
Juergen Kunz	a87e9578eb	v4.7.2	2026-03-17 00:39:57 +00:00
Juergen Kunz	b851bc7994	fix(remoteingress-core): add tunnel write timeouts and scale initial stream windows by active stream count	2026-03-17 00:39:57 +00:00
Juergen Kunz	1284bb5b73	v4.7.1	2026-03-17 00:15:10 +00:00
Juergen Kunz	1afd0e5347	fix(remoteingress-core): improve tunnel failure detection and reconnect handling	2026-03-17 00:15:10 +00:00
Juergen Kunz	96e7ab00cf	v4.7.0	2026-03-16 23:35:02 +00:00
Juergen Kunz	17d1a795cd	feat(edge,protocol,test): add configurable edge bind address and expand flow-control test coverage	2026-03-16 23:35:02 +00:00
Juergen Kunz	982f648928	v4.6.1	2026-03-16 22:46:51 +00:00
Juergen Kunz	3a2a060a85	fix(remoteingress-core): avoid spurious tunnel disconnect events and increase control channel capacity	2026-03-16 22:46:51 +00:00
Juergen Kunz	e0c469147e	v4.6.0	2026-03-16 19:37:06 +00:00
Juergen Kunz	0fdcdf566e	feat(remoteingress-core): add adaptive per-stream flow control based on active stream counts	2026-03-16 19:37:06 +00:00
Juergen Kunz	a808d4c9de	v4.5.12	2026-03-16 17:39:25 +00:00
Juergen Kunz	f8a0171ef3	fix(remoteingress-core): improve tunnel liveness handling and enable TCP keepalive for accepted client sockets	2026-03-16 17:39:25 +00:00
Juergen Kunz	1d59a48648	v4.5.11	2026-03-16 13:55:02 +00:00
Juergen Kunz	af2ec11a2d	fix(repo): no changes to commit	2026-03-16 13:55:02 +00:00
Juergen Kunz	b6e66a7fa6	v4.5.10	2026-03-16 13:48:35 +00:00
Juergen Kunz	1391b39601	fix(remoteingress-core): guard zero-window reads to avoid false EOF handling on stalled streams	2026-03-16 13:48:35 +00:00
Juergen Kunz	e813c2f044	v4.5.9	2026-03-16 11:29:38 +00:00
Juergen Kunz	0b8c1f0b57	fix(remoteingress-core): delay stream close until downstream response draining finishes to prevent truncated transfers	2026-03-16 11:29:38 +00:00
Juergen Kunz	a63dbf2502	v4.5.8	2026-03-16 10:51:59 +00:00
Juergen Kunz	4b95a3c999	fix(remoteingress-core): ensure upstream writes cancel promptly and reliably deliver CLOSE_BACK frames	2026-03-16 10:51:59 +00:00
Juergen Kunz	51ab32f6c3	v4.5.7	2026-03-16 09:44:31 +00:00
Juergen Kunz	ed52520d50	fix(remoteingress-core): improve tunnel reconnect and frame write efficiency	2026-03-16 09:44:31 +00:00
Juergen Kunz	a08011d2da	v4.5.6	2026-03-16 09:36:03 +00:00
Juergen Kunz	679b247c8a	fix(remoteingress-core): disable Nagle's algorithm on edge, hub, and upstream TCP sockets to reduce control-frame latency	2026-03-16 09:36:03 +00:00
Juergen Kunz	32f9845495	v4.5.5	2026-03-16 09:02:02 +00:00
Juergen Kunz	c0e1daa0e4	fix(remoteingress-core): wait for hub-to-client draining before cleanup and reliably send close frames	2026-03-16 09:02:02 +00:00
Juergen Kunz	fd511c8a5c	v4.5.4	2026-03-15 21:06:44 +00:00
Juergen Kunz	c490e35a8f	fix(remoteingress-core): preserve stream close ordering and add flow-control stall timeouts	2026-03-15 21:06:44 +00:00
Juergen Kunz	579e553da0	v4.5.3	2026-03-15 19:26:39 +00:00
Juergen Kunz	a8ee0b33d7	fix(remoteingress-core): prioritize control frames over data in edge and hub tunnel writers	2026-03-15 19:26:39 +00:00
Juergen Kunz	43e320a36d	v4.5.2	2026-03-15 18:16:10 +00:00
Juergen Kunz	6ac4b37532	fix(remoteingress-core): improve stream flow control retries and increase channel buffer capacity	2026-03-15 18:16:10 +00:00
Juergen Kunz	f456b0ba4f	v4.5.1	2026-03-15 17:52:45 +00:00
Juergen Kunz	69530f73aa	fix(protocol): increase per-stream flow control window and channel buffers to improve high-RTT throughput	2026-03-15 17:52:45 +00:00
Juergen Kunz	207b4a5cec	v4.5.0	2026-03-15 17:33:59 +00:00
Juergen Kunz	761551596b	feat(remoteingress-core): add per-stream flow control for edge and hub tunnel data transfer	2026-03-15 17:33:59 +00:00
Juergen Kunz	cf2d32bfe7	v4.4.1	2026-03-15 17:01:27 +00:00
Juergen Kunz	4e9041c6a7	fix(remoteingress-core): prevent stream data loss by applying backpressure and closing saturated channels	2026-03-15 17:01:27 +00:00
Juergen Kunz	86d4e9889a	v4.4.0	2026-03-03 11:47:50 +00:00
Juergen Kunz	45a2811f3e	feat(remoteingress): add heartbeat PING/PONG and liveness timeouts; implement fast-reconnect/backoff reset and JS crash-recovery auto-restart	2026-03-03 11:47:50 +00:00
Juergen Kunz	d6a07c28a0	v4.3.0	2026-02-26 23:47:16 +00:00
Juergen Kunz	56a14aa7c5	feat(hub): add optional TLS certificate/key support to hub start config and bridge	2026-02-26 23:47:16 +00:00
Juergen Kunz	417f62e646	v4.2.0	2026-02-26 23:02:23 +00:00
Juergen Kunz	bda82f32ca	feat(core): expose edge peer address in hub events and migrate writers to channel-based, non-blocking framing with stream limits and timeouts	2026-02-26 23:02:23 +00:00
Juergen Kunz	4b06cb1b24	v4.1.0	2026-02-26 17:39:40 +00:00
Juergen Kunz	1aae4b8c8e	feat(remoteingress-bin): use mimalloc as the global allocator to reduce memory overhead and improve allocation performance	2026-02-26 17:39:40 +00:00
Juergen Kunz	3474e8c310	v4.0.1	2026-02-26 12:37:40 +00:00
Juergen Kunz	3df20df2a1	fix(hub): cancel per-stream tokens on stream close and avoid duplicate StreamClosed events; bump @types/node devDependency to ^25.3.0	2026-02-26 12:37:39 +00:00
Juergen Kunz	929eec9825	v4.0.0	2026-02-19 08:45:32 +00:00
Juergen Kunz	4e511b3350	BREAKING CHANGE(remoteingress-core): add cancellation tokens and cooperative shutdown; switch event channels to bounded mpsc and improve cleanup	2026-02-19 08:45:32 +00:00
Juergen Kunz	a3af2487b7	v3.3.0	2026-02-18 18:41:25 +00:00
Juergen Kunz	51de25d767	feat(readme): document dynamic port assignment and runtime port updates; clarify TLS multiplexing, frame format, and handshake sequence	2026-02-18 18:41:25 +00:00
Juergen Kunz	7b8c4e1af5	v3.2.1	2026-02-18 18:35:53 +00:00
Juergen Kunz	0459cd2af6	fix(tests): add comprehensive unit and async tests across Rust crates and TypeScript runtime	2026-02-18 18:35:53 +00:00
Juergen Kunz	6fdc9ea918	v3.2.0	2026-02-18 18:20:53 +00:00
Juergen Kunz	d869589663	feat(remoteingress (edge/hub/protocol)): add dynamic port configuration: handshake, FRAME_CONFIG frames, and hot-reloadable listeners	2026-02-18 18:20:53 +00:00
Juergen Kunz	072362a8e6	v3.1.1	2026-02-18 06:01:33 +00:00
Juergen Kunz	b628a5f964	fix(readme): update README: add issue reporting/security section, document connection tokens and token utilities, clarify architecture/API and improve examples/formatting	2026-02-18 06:01:33 +00:00
Juergen Kunz	19e8003c77	v3.1.0	2026-02-17 19:36:40 +00:00
Juergen Kunz	93592bf909	feat(edge): support connection tokens when starting an edge and add token encode/decode utilities	2026-02-17 19:36:40 +00:00