3.22.1

changelog.md

@@ -1,5 +1,75 @@
 # Changelog
 
+## 2025-03-03 - 3.22.1 - fix(PortProxy)
+Fix connection timeout and IP validation handling for PortProxy
+
+- Adjusted initial data timeout setting for SNI-enabled connections in PortProxy.
+- Restored IP validation logic to original behavior, ensuring compatibility with domain configurations.
+
+## 2025-03-03 - 3.22.0 - feat(classes.portproxy)
+Enhanced PortProxy to support initial data timeout and improved IP handling
+
+- Added `initialDataTimeout` to PortProxy settings for handling data flow in chained proxies.
+- Improved IP validation by allowing relaxed checks in chained proxy setups.
+- Introduced dynamic logging for connection lifecycle and proxy configurations.
+- Enhanced timeout handling for better proxy resilience.
+
+## 2025-03-03 - 3.21.0 - feat(PortProxy)
+Enhancements to connection management in PortProxy
+
+- Introduced a unique ID for each connection record for improved tracking.
+- Enhanced cleanup mechanism for connections with dual states: initiated and executed.
+- Implemented shutdown process handling to ensure graceful connection closure.
+- Added logging for better tracing of connection activities and states.
+- Improved connection setup with explicit timeouts and data flow management.
+- Integrated inactivity and parity checks to monitor connection health.
+
+## 2025-03-01 - 3.20.2 - fix(PortProxy)
+Enhance connection cleanup handling in PortProxy
+
+- Add checks to ensure timers are reset only if outgoing socket is active
+- Prevent setting outgoingActive if the connection is already closed
+
+## 2025-03-01 - 3.20.1 - fix(PortProxy)
+Improve IP allowance check for forced domains
+
+- Enhanced IP allowance check logic by incorporating blocked IPs and default allowed IPs for forced domains within port proxy configurations.
+
+## 2025-03-01 - 3.20.0 - feat(PortProxy)
+Enhance PortProxy with advanced connection cleanup and logging
+
+- Introduced `cleanupConnection` method for improved connection management.
+- Added logging for connection cleanup including special conditions.
+- Implemented parity check to clean up connections when outgoing side closes but incoming remains active.
+- Improved logging during interval checks for active connections and their durations.
+
+## 2025-03-01 - 3.19.0 - feat(PortProxy)
+Enhance PortProxy with default blocked IPs
+
+- Introduced defaultBlockedIPs in IPortProxySettings to handle globally blocked IPs.
+- Added logic for merging domain-specific and default allowed and blocked IPs for effective IP filtering.
+- Refactored helper functions for IP and port range checks to improve modularity in PortProxy.
+
+## 2025-02-27 - 3.18.2 - fix(portproxy)
+Fixed typographical errors in comments within PortProxy class.
+
+- Corrected typographical errors in comments within the PortProxy class.
+
+## 2025-02-27 - 3.18.1 - fix(PortProxy)
+Refactor and enhance PortProxy test cases and handling
+
+- Refactored test cases in test/test.portproxy.ts for clarity and added coverage.
+- Improved TCP server helper functions for better flexibility.
+- Fixed issues with domain handling in PortProxy configuration.
+- Introduced round-robin logic for multi-IP domains in PortProxy.
+- Ensured proper cleanup and stopping of test servers in the test suite.
+
+## 2025-02-27 - 3.18.0 - feat(PortProxy)
+Add SNI-based renegotiation handling in PortProxy
+
+- Introduced a new field 'lockedDomain' in IConnectionRecord to store initial SNI.
+- Enhanced connection management by enforcing termination if rehandshake is detected with different SNI.
+
 ## 2025-02-27 - 3.17.1 - fix(PortProxy)
 Fix handling of SNI re-negotiation in PortProxy
 

package.json

@@ -1,6 +1,6 @@
 {
   "name": "@push.rocks/smartproxy",
-  "version": "3.17.1",
+  "version": "3.22.1",
   "private": false,
   "description": "A powerful proxy package that effectively handles high traffic, with features such as SSL/TLS support, port proxying, WebSocket handling, and dynamic routing with authentication options.",
   "main": "dist_ts/index.js",

test/test.portproxy.ts

@@ -8,31 +8,30 @@ const TEST_SERVER_PORT = 4000;
 const PROXY_PORT = 4001;
 const TEST_DATA = 'Hello through port proxy!';
 
-// Helper function to create a test TCP server
-function createTestServer(port: number): Promise<net.Server> {
+// Helper: Creates a test TCP server that listens on a given port and host.
+function createTestServer(port: number, host: string = 'localhost'): Promise<net.Server> {
   return new Promise((resolve) => {
     const server = net.createServer((socket) => {
       socket.on('data', (data) => {
-        // Echo the received data back
+        // Echo the received data back with a prefix.
         socket.write(`Echo: ${data.toString()}`);
       });
       socket.on('error', (error) => {
-        console.error('[Test Server] Socket error:', error);
+        console.error(`[Test Server] Socket error on ${host}:${port}:`, error);
       });
     });
-    server.listen(port, () => {
-      console.log(`[Test Server] Listening on port ${port}`);
+    server.listen(port, host, () => {
+      console.log(`[Test Server] Listening on ${host}:${port}`);
       resolve(server);
     });
   });
 }
 
-// Helper function to create a test client connection
+// Helper: Creates a test client connection.
 function createTestClient(port: number, data: string): Promise<string> {
   return new Promise((resolve, reject) => {
     const client = new net.Socket();
     let response = '';
-
     client.connect(port, 'localhost', () => {
       console.log('[Test Client] Connected to server');
       client.write(data);
@@ -41,47 +40,44 @@ function createTestClient(port: number, data: string): Promise<string> {
       response += chunk.toString();
       client.end();
     });
-    client.on('end', () => {
-      resolve(response);
-    });
-    client.on('error', (error) => {
-      reject(error);
-    });
+    client.on('end', () => resolve(response));
+    client.on('error', (error) => reject(error));
   });
 }
 
-// Setup test environment
+// SETUP: Create a test server and a PortProxy instance.
 tap.test('setup port proxy test environment', async () => {
   testServer = await createTestServer(TEST_SERVER_PORT);
   portProxy = new PortProxy({
     fromPort: PROXY_PORT,
     toPort: TEST_SERVER_PORT,
     targetIP: 'localhost',
-    domains: [],
+    domainConfigs: [],
     sniEnabled: false,
     defaultAllowedIPs: ['127.0.0.1'],
     globalPortRanges: []
   });
 });
 
+// Test that the proxy starts and its servers are listening.
 tap.test('should start port proxy', async () => {
   await portProxy.start();
-  // Since netServers is private, we cast to any to verify that all created servers are listening.
   expect((portProxy as any).netServers.every((server: net.Server) => server.listening)).toBeTrue();
 });
 
+// Test basic TCP forwarding.
 tap.test('should forward TCP connections and data to localhost', async () => {
   const response = await createTestClient(PROXY_PORT, TEST_DATA);
   expect(response).toEqual(`Echo: ${TEST_DATA}`);
 });
 
+// Test proxy with a custom target host.
 tap.test('should forward TCP connections to custom host', async () => {
-  // Create a new proxy instance with a custom host (targetIP)
   const customHostProxy = new PortProxy({
     fromPort: PROXY_PORT + 1,
     toPort: TEST_SERVER_PORT,
     targetIP: '127.0.0.1',
-    domains: [],
+    domainConfigs: [],
     sniEnabled: false,
     defaultAllowedIPs: ['127.0.0.1'],
     globalPortRanges: []
@@ -93,153 +89,151 @@ tap.test('should forward TCP connections to custom host', async () => {
   await customHostProxy.stop();
 });
 
-tap.test('should forward connections based on domain-specific target IP', async () => {
-  // Create a second test server on a different port
-  const TEST_SERVER_PORT_2 = TEST_SERVER_PORT + 100;
-  const testServer2 = await createTestServer(TEST_SERVER_PORT_2);
+// Test forced domain routing via port-range configuration.
+// In this test, we want to forward to a different IP (using '127.0.0.2')
+// while keeping the same port. We create a test server on '127.0.0.2'.
+tap.test('should forward connections based on domain-specific target IP (forced domain via port-range)', async () => {
+  const forcedProxyPort = PROXY_PORT + 2;
+  // Create a test server listening on '127.0.0.2' at forcedProxyPort.
+  const testServer2 = await createTestServer(forcedProxyPort, '127.0.0.2');
 
-  // Create a proxy with domain-specific target IPs
   const domainProxy = new PortProxy({
-    fromPort: PROXY_PORT + 2,
-    toPort: TEST_SERVER_PORT,  // default port (for non-port-range handling)
-    targetIP: 'localhost',     // default target IP
-    domains: [{
-      domain: 'domain1.test',
+    fromPort: forcedProxyPort,
+    toPort: TEST_SERVER_PORT, // default target port (unused for forced domain)
+    targetIP: 'localhost',
+    domainConfigs: [{
+      domains: ['forced.test'],
       allowedIPs: ['127.0.0.1'],
-      targetIP: '127.0.0.1'
-    }, {
-      domain: 'domain2.test',
-      allowedIPs: ['127.0.0.1'],
-      targetIP: 'localhost'
+      targetIPs: ['127.0.0.2'], // Use a different IP than the default.
+      portRanges: [{ from: forcedProxyPort, to: forcedProxyPort }]
     }],
     sniEnabled: false,
     defaultAllowedIPs: ['127.0.0.1'],
-    globalPortRanges: []
+    globalPortRanges: [{ from: forcedProxyPort, to: forcedProxyPort }]
   });
 
   await domainProxy.start();
 
-  // Test default connection (should use default targetIP)
-  const response1 = await createTestClient(PROXY_PORT + 2, TEST_DATA);
-  expect(response1).toEqual(`Echo: ${TEST_DATA}`);
-
-  // Create another proxy with a different default targetIP
-  const domainProxy2 = new PortProxy({
-    fromPort: PROXY_PORT + 3,
-    toPort: TEST_SERVER_PORT,
-    targetIP: '127.0.0.1',
-    domains: [],
-    sniEnabled: false,
-    defaultAllowedIPs: ['127.0.0.1'],
-    globalPortRanges: []
-  });
-
-  await domainProxy2.start();
-  const response2 = await createTestClient(PROXY_PORT + 3, TEST_DATA);
-  expect(response2).toEqual(`Echo: ${TEST_DATA}`);
+  // When connecting to forcedProxyPort, forced domain handling triggers,
+  // so the proxy will connect to '127.0.0.2' on the same port.
+  const response = await createTestClient(forcedProxyPort, TEST_DATA);
+  expect(response).toEqual(`Echo: ${TEST_DATA}`);
 
   await domainProxy.stop();
-  await domainProxy2.stop();
   await new Promise<void>((resolve) => testServer2.close(() => resolve()));
 });
 
+// Test handling of multiple concurrent connections.
 tap.test('should handle multiple concurrent connections', async () => {
   const concurrentRequests = 5;
-  const requests = Array(concurrentRequests).fill(null).map((_, i) => 
+  const requests = Array(concurrentRequests).fill(null).map((_, i) =>
     createTestClient(PROXY_PORT, `${TEST_DATA} ${i + 1}`)
   );
-  
   const responses = await Promise.all(requests);
-  
   responses.forEach((response, i) => {
     expect(response).toEqual(`Echo: ${TEST_DATA} ${i + 1}`);
   });
 });
 
+// Test connection timeout handling.
 tap.test('should handle connection timeouts', async () => {
   const client = new net.Socket();
   await new Promise<void>((resolve) => {
     client.connect(PROXY_PORT, 'localhost', () => {
-      // Don't send any data, just wait for timeout
-      client.on('close', () => {
-        resolve();
-      });
+      // Do not send any data to trigger a timeout.
+      client.on('close', () => resolve());
     });
   });
 });
 
+// Test stopping the port proxy.
 tap.test('should stop port proxy', async () => {
   await portProxy.stop();
   expect((portProxy as any).netServers.every((server: net.Server) => !server.listening)).toBeTrue();
 });
 
-// Cleanup chained proxies tests
+// Test chained proxies with and without source IP preservation.
 tap.test('should support optional source IP preservation in chained proxies', async () => {
-  // Test 1: Without IP preservation (default behavior)
+  // Chained proxies without IP preservation.
   const firstProxyDefault = new PortProxy({
     fromPort: PROXY_PORT + 4,
     toPort: PROXY_PORT + 5,
     targetIP: 'localhost',
-    domains: [],
+    domainConfigs: [],
     sniEnabled: false,
     defaultAllowedIPs: ['127.0.0.1', '::ffff:127.0.0.1'],
     globalPortRanges: []
   });
-
   const secondProxyDefault = new PortProxy({
     fromPort: PROXY_PORT + 5,
     toPort: TEST_SERVER_PORT,
     targetIP: 'localhost',
-    domains: [],
+    domainConfigs: [],
     sniEnabled: false,
     defaultAllowedIPs: ['127.0.0.1', '::ffff:127.0.0.1'],
     globalPortRanges: []
   });
-
   await secondProxyDefault.start();
   await firstProxyDefault.start();
-
-  // This should work because we explicitly allow both IPv4 and IPv6 formats
   const response1 = await createTestClient(PROXY_PORT + 4, TEST_DATA);
   expect(response1).toEqual(`Echo: ${TEST_DATA}`);
-
   await firstProxyDefault.stop();
   await secondProxyDefault.stop();
 
-  // Test 2: With IP preservation
+  // Chained proxies with IP preservation.
   const firstProxyPreserved = new PortProxy({
     fromPort: PROXY_PORT + 6,
     toPort: PROXY_PORT + 7,
     targetIP: 'localhost',
-    domains: [],
+    domainConfigs: [],
     sniEnabled: false,
     defaultAllowedIPs: ['127.0.0.1'],
     preserveSourceIP: true,
     globalPortRanges: []
   });
-
   const secondProxyPreserved = new PortProxy({
     fromPort: PROXY_PORT + 7,
     toPort: TEST_SERVER_PORT,
     targetIP: 'localhost',
-    domains: [],
+    domainConfigs: [],
     sniEnabled: false,
     defaultAllowedIPs: ['127.0.0.1'],
     preserveSourceIP: true,
     globalPortRanges: []
   });
-
   await secondProxyPreserved.start();
   await firstProxyPreserved.start();
-
-  // This should work with just IPv4 because source IP is preserved
   const response2 = await createTestClient(PROXY_PORT + 6, TEST_DATA);
   expect(response2).toEqual(`Echo: ${TEST_DATA}`);
-
   await firstProxyPreserved.stop();
   await secondProxyPreserved.stop();
 });
 
+// Test round-robin behavior for multiple target IPs in a domain config.
+tap.test('should use round robin for multiple target IPs in domain config', async () => {
+  const domainConfig = {
+    domains: ['rr.test'],
+    allowedIPs: ['127.0.0.1'],
+    targetIPs: ['hostA', 'hostB']
+  } as any;
+  
+  const proxyInstance = new PortProxy({
+    fromPort: 0,
+    toPort: 0,
+    targetIP: 'localhost',
+    domainConfigs: [domainConfig],
+    sniEnabled: false,
+    defaultAllowedIPs: [],
+    globalPortRanges: []
+  });
+  
+  const firstTarget = (proxyInstance as any).getTargetIP(domainConfig);
+  const secondTarget = (proxyInstance as any).getTargetIP(domainConfig);
+  expect(firstTarget).toEqual('hostA');
+  expect(secondTarget).toEqual('hostB');
+});
+
+// CLEANUP: Tear down the test server.
 tap.test('cleanup port proxy test environment', async () => {
   await new Promise<void>((resolve) => testServer.close(() => resolve()));
 });
@@ -248,7 +242,6 @@ process.on('exit', () => {
   if (testServer) {
     testServer.close();
   }
-  // Use a cast to access the private property for cleanup.
   if (portProxy && (portProxy as any).netServers) {
     portProxy.stop();
   }

ts/00_commitinfo_data.ts

@@ -3,6 +3,6 @@
  */
 export const commitinfo = {
   name: '@push.rocks/smartproxy',
-  version: '3.17.1',
+  version: '3.22.1',
   description: 'A powerful proxy package that effectively handles high traffic, with features such as SSL/TLS support, port proxying, WebSocket handling, and dynamic routing with authentication options.'
 }